[U-Boot] [PATCH 25/34] Kbuild: move include directives of board configuration files

Masahiro Yamada yamada.m at jp.panasonic.com
Wed Dec 11 12:01:47 CET 2013


This commit changes the location of include directives
of board configuration files.

The purpose of this change is:
 - Slim down $(TOPDIR)/config.mk
 - Prevent $(TOPDIR)/Makefile from including the same
    configuration file twice
 - Do not include include/config.mk multiple times
    because ARCH, CPU, BOARD, VENDOR, SOC are exported

Before this commit:

 - include/autoconf.mk was included from $(TOPDIR)/Makefile
   and $(TOPDIR)/config.mk
   (This means $(TOPDIR)/Makefile included include/autoconf.mk twice)

 - include/{spl,tpl}-autoconf.mk was included from $(TOPDIR)/config.mk

 - include/config.mk was included from $(TOPDIR)/Makefile
   and $(TOPDIR)/config.mk
   (This means $(TOPDIR)/Makefile included include/config.mk twice)

After this commit:

 - include/autoconf.mk is included from $(TOPDIR)/Makefile
   and $(TOPDIR)/scripts/Makefile.build

 - include/{spl,tpl}-autoconf.mk is included from $(TOPDIR)/spl/Makefile
   and $(TOPDIR)/scripts/Makefile.build

 - include/config.mk is included from $(TOPDIR)/config.mk and
   $(TOPDIR)/spl/Makefile

Signed-off-by: Masahiro Yamada <yamada.m at jp.panasonic.com>
---

 config.mk              | 15 ---------------
 scripts/Makefile.build | 11 +++++++++++
 spl/Makefile           |  8 ++++++++
 3 files changed, 19 insertions(+), 15 deletions(-)

diff --git a/config.mk b/config.mk
index 1336ef8..5b886aa 100644
--- a/config.mk
+++ b/config.mk
@@ -13,21 +13,6 @@ PLATFORM_LDFLAGS =
 
 #########################################################################
 
-# Load generated board configuration
-ifeq ($(CONFIG_TPL_BUILD),y)
-# Include TPL autoconf
-sinclude include/tpl-autoconf.mk
-else
-ifeq ($(CONFIG_SPL_BUILD),y)
-# Include SPL autoconf
-sinclude include/spl-autoconf.mk
-else
-# Include normal autoconf
-sinclude include/autoconf.mk
-endif
-endif
-sinclude $(OBJTREE)/include/config.mk
-
 # Some architecture config.mk files need to know what CPUDIR is set to,
 # so calculate CPUDIR before including ARCH/SOC/CPU config.mk files.
 # Check if arch/$ARCH/cpu/$CPU exists, otherwise assume arch/$ARCH/cpu contains
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 921fbbf..f37957f 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -42,6 +42,17 @@ subdir-ccflags-y :=
 # Read auto.conf if it exists, otherwise ignore
 -include include/config/auto.conf
 
+# Added for U-Boot: Load U-Boot configuration
+ifeq ($(CONFIG_TPL_BUILD),y)
+  -include include/tpl-autoconf.mk
+else
+  ifeq ($(CONFIG_SPL_BUILD),y)
+    -include include/spl-autoconf.mk
+  else
+    -include include/autoconf.mk
+  endif
+endif
+
 include scripts/Kbuild.include
 # Modified for U-Boot
 #  We must include config.mk after Kbuild.include:
diff --git a/spl/Makefile b/spl/Makefile
index fd5294b..bf886f7 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -38,6 +38,14 @@ else
 SPL_BIN := u-boot-spl
 endif
 
+include include/config.mk
+
+ifeq ($(CONFIG_TPL_BUILD),y)
+  -include include/tpl-autoconf.mk
+else
+  -include include/spl-autoconf.mk
+endif
+
 include $(srctree)/scripts/Kbuild.include
 
 include $(TOPDIR)/config.mk
-- 
1.8.3.2



More information about the U-Boot mailing list