[U-Boot] [PATCH 00/11 V11] EXYNOS5420: Add SMDK5420 board support

Rajeshwari Birje rajeshwari.birje at gmail.com
Wed Dec 18 06:10:35 CET 2013


Hi Minkyu,

Can we please, get these patches reviewed and merged.

Regards,
Rajeshwari.

On Mon, Dec 16, 2013 at 2:12 PM, Rajeshwari S Shinde
<rajeshwari.s at samsung.com> wrote:
> This patch adds basic board support for SMDK5420 board.
> These patches are tested for booting fine on EVT1 SMDK5420.
>
> Changes in V2:
>         - Corrected a compilation issue for SMDK5420.
>
> Changes in V3:
>         - Add patch to support variable size SPL support
>         - Add patch to disable SMU for eMMC.
>
> Changes in V4:
>         - Added check for MAX77686 pmic compilation.
>         - Added correct calculation of gpio based addresses.
>         - Rebased on the latest u-boot code.
>         - Removed patches for UART and TZPC changes as
>         they were not needed.
>         - Added flag to disable SMU for eMMC.
>
> Changes in V5:
>         - Moved functions board_mmc_init and board_eth_init
>         to common/board.c in case of device tree support.
>
> Changes in V6:
>         - Rebased on the latest mainline branch.
>         - Moved the definitions for SMU to arch/arm dwmmc.h
>
> Changes in V7:
>         - Removed below patch as it is already merged
>         "DWMMC: SMDK5420: Disable SMU for eMMC"
>         - Corrected the multi line comments and removal of
>         blank spaces and lines.
>         - Corrected the license.
>
> Changes in V8:
>         - corrected the if loops with if conditions of
>         pro_id and cpu_id.
>
> Changes in V9:
>         - Added macros to get the base address
>         - Rebased on latest code.
>
> Changes in V10:
>         - Added new structures for Power and DMC registers for
>         5420.
>         - Changed the input parameters for common dmc functions.
>         - Removed unnecesarry blank lines and added where ever required.
>
> Changes in V11:
>         -Rebased on latest u-boot-samsung branch.
>
> Rajeshwari S Shinde (11):
>   EXYNOS5: Create a common board file
>   Exynos5420: Add base addresses for 5420
>   EXYNOS5420: Add power register structure.
>   EXYNOS5420: Add dmc and phy_control register structure
>   Exynos5420: Add clock initialization for 5420
>   Exynos5420: Add DDR3 initialization for 5420
>   Exynos5420: Add support for 5420 in pinmux and gpio
>   Exynos5420: Add base patch for SMDK5420
>   DTS: Add dts support for SMDK5420
>   Config: Add initial config for SMDK5420
>   SPL: EXYNOS: Prepare for variable size SPL support
>
>  arch/arm/cpu/armv7/exynos/clock.c              | 279 ++++++++-
>  arch/arm/cpu/armv7/exynos/clock_init.h         |  17 +
>  arch/arm/cpu/armv7/exynos/clock_init_exynos5.c | 352 ++++++++++-
>  arch/arm/cpu/armv7/exynos/dmc_common.c         |  60 +-
>  arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c      | 439 ++++++++++++-
>  arch/arm/cpu/armv7/exynos/exynos5_setup.h      | 764 ++++++++++++++++------
>  arch/arm/cpu/armv7/exynos/pinmux.c             | 260 +++++++-
>  arch/arm/dts/exynos5.dtsi                      | 198 ++++++
>  arch/arm/dts/exynos5250.dtsi                   | 194 +-----
>  arch/arm/dts/exynos5420.dtsi                   |  70 +++
>  arch/arm/include/asm/arch-exynos/board.h       |  17 +
>  arch/arm/include/asm/arch-exynos/clk.h         |   1 +
>  arch/arm/include/asm/arch-exynos/clock.h       | 494 +++++++++++++++
>  arch/arm/include/asm/arch-exynos/cpu.h         |  52 +-
>  arch/arm/include/asm/arch-exynos/dmc.h         | 177 ++++++
>  arch/arm/include/asm/arch-exynos/gpio.h        | 143 ++++-
>  arch/arm/include/asm/arch-exynos/periph.h      |   3 +
>  arch/arm/include/asm/arch-exynos/power.h       | 837 +++++++++++++++++++++++++
>  board/samsung/common/Makefile                  |   4 +
>  board/samsung/common/board.c                   | 410 ++++++++++++
>  board/samsung/dts/exynos5420-smdk5420.dts      | 169 +++++
>  board/samsung/smdk5250/exynos5-dt.c            | 352 +----------
>  board/samsung/smdk5250/smdk5250.c              | 182 +-----
>  board/samsung/smdk5420/Makefile                |  11 +
>  board/samsung/smdk5420/smdk5420.c              | 159 +++++
>  board/samsung/smdk5420/smdk5420_spl.c          |  52 ++
>  boards.cfg                                     |   1 +
>  include/configs/arndale.h                      |   1 +
>  include/configs/exynos5-dt.h                   | 289 +++++++++
>  include/configs/exynos5250-dt.h                | 283 +--------
>  include/configs/smdk5420.h                     |  56 ++
>  spl/Makefile                                   |   7 +-
>  tools/Makefile                                 |   3 +-
>  tools/mkexynosspl.c                            | 167 +++--
>  34 files changed, 5188 insertions(+), 1315 deletions(-)
>  create mode 100644 arch/arm/dts/exynos5.dtsi
>  create mode 100644 arch/arm/dts/exynos5420.dtsi
>  create mode 100644 arch/arm/include/asm/arch-exynos/board.h
>  create mode 100644 board/samsung/common/board.c
>  create mode 100644 board/samsung/dts/exynos5420-smdk5420.dts
>  create mode 100644 board/samsung/smdk5420/Makefile
>  create mode 100644 board/samsung/smdk5420/smdk5420.c
>  create mode 100644 board/samsung/smdk5420/smdk5420_spl.c
>  create mode 100644 include/configs/exynos5-dt.h
>  create mode 100644 include/configs/smdk5420.h
>
> --
> 1.7.12.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot



-- 
Regards,
Rajeshwari Shinde


More information about the U-Boot mailing list