[U-Boot] [UBOOT][PATCHv2 0/5] qspi: Add AM437x support

[Jagan Teki]

Hi Sourav,

On Fri, Dec 20, 2013 at 11:27 AM, Sourav Poddar <sourav.poddar at ti.com> wrote:
> The patch series add support for enabling qspi
> on AM43xx at uboot.
>
> Testing done:
> -------------
> Wrote a uImage to the flash, read it back and boot the
> kernel.
>
> v1->v2:
> Remove patch 3 of previous version, as support was already added
> for macronix flash.
> Created a doc explaining the test details.
>
> This patches are developed and tested on top of the following tree:
> git://git.denx.de/u-boot-ti.git
> branch: master
These are no apply directly to master may be some dependencies require
- please check.

>
> Sourav Poddar (5):
>   am43xx: add qspi support
>   am437x_epos_evm: add SPL API, QSPI, and serial flash support
>   qspi/spi: Add AM43xx specifics changes
>   am43xx: add delay before xfer
>   doc: qspi: Add qspi test details on AM43xx
>
>  arch/arm/cpu/armv7/am33xx/clock_am43xx.c |    1 +
>  arch/arm/include/asm/arch-am33xx/cpu.h   |    4 +-
>  arch/arm/include/asm/arch-am33xx/omap.h  |    1 +
>  board/ti/am43xx/mux.c                    |   11 ++++
>  doc/SPI/README.ti_qspi_am43x_test        |   76 ++++++++++++++++++++++++++++++
>  drivers/spi/ti_qspi.c                    |   33 ++++++++++++-
>  include/configs/am43xx_evm.h             |   20 ++++++++
>  7 files changed, 142 insertions(+), 4 deletions(-)
>  create mode 100644 doc/SPI/README.ti_qspi_am43x_test
>

-- 
Thanks,
Jagan.