[U-Boot] [PATCH v2 00/35] zynq: More boards support
Jagannadha Sutradharudu Teki
jagannadha.sutradharudu-teki at xilinx.com
Wed Dec 18 16:29:45 CET 2013
These changes are from u-boot-xlnx.git repo from git.xilinx.com
This repo is well tested on xilinx zynq platform, hence pushing
the same on upstream.
--
Thanks,
Jagan.
Jagannadha Sutradharudu Teki (35):
zynq: Enable CONFIG_FIT_VERBOSE
zynq: Enable Boot FreeBSD/vxWorks
zynq: Cleanup on miscellaneous configs
zynq: Cleanup on memory configs
zynq: Minor config cleanup
zynq: Enable cache options
zynq: Add UART0, UART1 configs support
zynq: Add GEM0, GEM1 configs support
zynq-common: Rename zynq with zynq-common
zynq: Add support to find bootmode
spi: Add zynq qspi controller driver
zynq-common: Enable CONFIG_ZYNQ_QSPI
zynq: Add zynq zc70x board support
zynq: Add zynq zed board support
zynq-common: Define CONFIG_SPI_FLASH_BAR
zynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs
zynq-common: Define exact TEXT_BASE
zynq: zc70x: Add Catalyst 24WC08 EEPROM config support
zynq: Add zynq microzed board support
zynq: Add zynq_zc770 xm010 board support
zynq: Add zynq_zc770 xm013 board support
zynq: Add zynq_zc770 xm012 board support
nand: Add zynq nand controller driver support
zynq-common: Define CONFIG_NAND_ZYNQ
zynq: Add zynq_zc770 xm011 board support
zynq: Add support to find bootmode
zynq-common: Define default environment
zynq-common: Change Env. Sector size to 128Kb
zynq-common: Define flash env. partition
zynq-common: Define CONFIG_ENV_OVERWRITE
dts: zynq: Add basic fdt support
gpio: zynq: Add dummy gpio routines
zynq-common: Enable verified boot(RSA)
dts: zynq: Add more zynq dts files
doc: Update the zynq u-boot status
README | 4 +
arch/arm/cpu/armv7/zynq/slcr.c | 6 +
arch/arm/dts/zynq-7000.dtsi | 13 +
arch/arm/include/asm/arch-zynq/gpio.h | 25 +
arch/arm/include/asm/arch-zynq/hardware.h | 3 +
arch/arm/include/asm/arch-zynq/sys_proto.h | 1 +
board/xilinx/dts/zynq-microzed.dts | 14 +
board/xilinx/dts/zynq-zc702.dts | 14 +
board/xilinx/dts/zynq-zc706.dts | 14 +
board/xilinx/dts/zynq-zc770-xm010.dts | 14 +
board/xilinx/dts/zynq-zc770-xm011.dts | 14 +
board/xilinx/dts/zynq-zc770-xm012.dts | 14 +
board/xilinx/dts/zynq-zc770-xm013.dts | 14 +
board/xilinx/dts/zynq-zed.dts | 14 +
board/xilinx/zynq/board.c | 33 +
boards.cfg | 9 +-
doc/README.zynq | 92 +++
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/zynq_nand.c | 1198 ++++++++++++++++++++++++++++
drivers/spi/Makefile | 1 +
drivers/spi/zynq_qspi.c | 449 +++++++++++
include/configs/zynq-common.h | 270 +++++++
include/configs/zynq.h | 139 ----
include/configs/zynq_microzed.h | 26 +
include/configs/zynq_zc70x.h | 29 +
include/configs/zynq_zc770.h | 44 +
include/configs/zynq_zed.h | 27 +
27 files changed, 2341 insertions(+), 141 deletions(-)
create mode 100644 arch/arm/dts/zynq-7000.dtsi
create mode 100644 arch/arm/include/asm/arch-zynq/gpio.h
create mode 100644 board/xilinx/dts/zynq-microzed.dts
create mode 100644 board/xilinx/dts/zynq-zc702.dts
create mode 100644 board/xilinx/dts/zynq-zc706.dts
create mode 100644 board/xilinx/dts/zynq-zc770-xm010.dts
create mode 100644 board/xilinx/dts/zynq-zc770-xm011.dts
create mode 100644 board/xilinx/dts/zynq-zc770-xm012.dts
create mode 100644 board/xilinx/dts/zynq-zc770-xm013.dts
create mode 100644 board/xilinx/dts/zynq-zed.dts
create mode 100644 doc/README.zynq
create mode 100644 drivers/mtd/nand/zynq_nand.c
create mode 100644 drivers/spi/zynq_qspi.c
create mode 100644 include/configs/zynq-common.h
delete mode 100644 include/configs/zynq.h
create mode 100644 include/configs/zynq_microzed.h
create mode 100644 include/configs/zynq_zc70x.h
create mode 100644 include/configs/zynq_zc770.h
create mode 100644 include/configs/zynq_zed.h
--
1.8.3
More information about the U-Boot
mailing list