[U-Boot] [PATCH v3 11/29] zynq: Add zynq zc70x board support
Jagannadha Sutradharudu Teki
jagannadha.sutradharudu-teki at xilinx.com
Thu Dec 19 19:09:02 CET 2013
The Zynq-7000 APSOC zc702 and zc706 enabled complte embedded
processing includes ASIC and FPGA design.
ZC702-:
APSOC:
- XC7Z020-CLG484-1
Memory:
- DDR3 Component Memory 1GB
- 16MB Quad SPI Flash
- IIC - 1 KB EEPROM
Connectivity:
- Gigabit Ethernet GMII, RGMII and SGMII.
- USB OTG - Host USB
- IIC Bus Headers/HUB
- 1 CAN with Wake on CAN
- USB-UART
Video/Display:
- HDMI Video OUT
- 8X LEDs
Control & I/O:
- 3 User Push Buttons
- 2 User Switches
- 8 User LEDs
For more info on zc702 board:
- http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm
ZC706-:
APSOC:
- XC7Z045 FFG900 -2 AP SoC
Memory:
- DDR3 Component Memory 1GB (PS)
- DDR3 SODIM Memory 1GB (PL)
- 2X16MB Quad SPI Flash (dual parallel)
- IIC - 1 KB EEPROM
Connectivity:
- PCIe Gen2x4
- SFP+ and SMA Pairs
- GigE RGMII Ethernet (PS)
- USB OTG 1 (PS) - Host USB
- IIC Bus Headers/HUB (PS)
- 1 CAN with Wake on CAN (PS)
- USB-UART
Video/Display:
- HDMI 8 color RGB 4.4.4 1080P-60 OUT
- HDMI IN 8 color RGB 4.4.4
Control & I/O:
- 2 User Push Buttons/Dip Switch, 2 User LEDs
- IIC access to GPIO
- SDIO (SD Card slot)
- 3 User Push Buttons, 2 User Switches, 8 User LEDs
For more info on zc706 board:
- http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
---
V3: Removed CONFIG_SPI_ZYNQ
V2: none
boards.cfg | 1 +
include/configs/zynq-common.h | 6 ------
include/configs/zynq_zc70x.h | 25 +++++++++++++++++++++++++
3 files changed, 26 insertions(+), 6 deletions(-)
create mode 100644 include/configs/zynq_zc70x.h
diff --git a/boards.cfg b/boards.cfg
index bff75e9..44d41eb 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -354,6 +354,7 @@ Active arm armv7 socfpga altera socfpga
Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier <mathieu.poirier at linaro.org>
Active arm armv7 u8500 st-ericsson u8500 u8500_href - -
Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang <b18965 at freescale.com>
+Active arm armv7 zynq xilinx zynq zynq_zc70x - Michal Simek <monstr at monstr.eu>:Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren <twarren at nvidia.com>
Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Thierry Reding <thierry.reding at avionic-design.de>
Active arm armv7:arm720t tegra20 avionic-design plutux plutux - Thierry Reding <thierry.reding at avionic-design.de>
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 9fe06e8..1551c60 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -36,7 +36,6 @@
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
/* Zynq Serial driver */
-#define CONFIG_ZYNQ_SERIAL_UART1
#ifdef CONFIG_ZYNQ_SERIAL_UART0
# define CONFIG_ZYNQ_SERIAL_BASEADDR0 0xE0000000
# define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE
@@ -60,8 +59,6 @@
#endif
/* Ethernet driver */
-#define CONFIG_ZYNQ_GEM0
-#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7
#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
# define CONFIG_NET_MULTI
# define CONFIG_ZYNQ_GEM
@@ -71,7 +68,6 @@
# define CONFIG_PHY_MARVELL
#endif
-#define CONFIG_ZYNQ_SPI
/* SPI */
#ifdef CONFIG_ZYNQ_SPI
# define CONFIG_SPI_FLASH
@@ -82,7 +78,6 @@
/* NOR */
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ZYNQ_SDHCI0
/* MMC */
#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
# define CONFIG_MMC
@@ -96,7 +91,6 @@
# define CONFIG_DOS_PARTITION
#endif
-#define CONFIG_ZYNQ_I2C0
/* I2C */
#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
# define CONFIG_CMD_I2C
diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h
new file mode 100644
index 0000000..9910804
--- /dev/null
+++ b/include/configs/zynq_zc70x.h
@@ -0,0 +1,25 @@
+/*
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Configuration settings for the Xilinx Zynq ZC702 and ZC706 boards
+ * See zynq_common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_ZC70X_H
+#define __CONFIG_ZYNQ_ZC70X_H
+
+#define CONFIG_ZYNQ_SERIAL_UART1
+#define CONFIG_ZYNQ_GEM0
+#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_ZYNQ_I2C0
+#define CONFIG_ZYNQ_BOOT_FREEBSD
+
+#include <configs/zynq-common.h>
+
+#endif /* __CONFIG_ZYNQ_ZC70X_H */
--
1.8.3
More information about the U-Boot
mailing list