[U-Boot] [PATCH v3 0/8] Pending patches for merging

[Otavio Salvador]

This sends all the patches I've been keeping in my tree and are awaiting to be
applied. Basically:

 * Wandboard LCD support and environment changes
 * mx28evk environment changes
 * SabreSD eMMC installation support
 * IOMUX fix
 * FDT loadaddr fix
 * FEC Anatop clock fix

Changes in v3:
- rebased on imx/master
- new patch

Changes in v2:
- Change loadaddr to allow use with more than 1G of RAM

Otavio Salvador (8):
  wandboard: add Future Eletronics 7" WVGA LCD extension board
  mx6sabresd: Add eMMC specific environment to allow U-Boot update
  imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro
  mx28evk: Use 512k for fdt partition to align it
  mx28evk: Add 'nandboot' environment command
  mx28evk: Extend environment to easy write of NAND system
  ARM: mx6: Change the FDT loading address to avoid overlaping
  ARM: mx6: Allow enablement of FEC Anatop based clock for all MX6

 arch/arm/cpu/armv7/mx6/clock.c             |  21 +--
 arch/arm/include/asm/imx-common/iomux-v3.h |   2 +
 board/wandboard/wandboard.c                | 240 ++++++++++++++++++++++++++---
 include/configs/cgtqmx6eval.h              |   2 +-
 include/configs/mx28evk.h                  |  55 ++++++-
 include/configs/mx6sabre_common.h          |  25 ++-
 include/configs/mx6sabresd.h               |   2 +
 include/configs/nitrogen6x.h               |   2 +-
 include/configs/udoo.h                     |   2 +-
 include/configs/wandboard.h                |  37 ++++-
 10 files changed, 346 insertions(+), 42 deletions(-)

-- 
1.8.4.3