[U-Boot] [PATCH] ARM: twister: add missing gpio clock init

[Stefano Babic]

On 21/12/2013 18:06, Jeroen Hofstee wrote:
> Commit f33b9bd3984fb11e1d8566a866adc5957b1e1c9d breaks boards
> which do not explicitly enable the gpio clocks. This causes
> the twister spl to hang, since it uses the no longer enabled
> gpio 55. Add CONFIG_OMAP3_GPIO_2 to unbrick the board.
> 
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Tapani Utriainen <tapani at technexion.com>
> Signed-off-by: Jeroen Hofstee <jeroen at myspectrum.nl>
> ---
>  include/configs/twister.h | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/include/configs/twister.h b/include/configs/twister.h
> index b6ca59c..f24dc13 100644
> --- a/include/configs/twister.h
> +++ b/include/configs/twister.h
> @@ -50,4 +50,7 @@
>  #define CONFIG_SYS_SPL_ARGS_ADDR	(PHYS_SDRAM_1 + 0x100)
>  #define CONFIG_SPL_BOARD_INIT
>  
> +/* gpio 55 is used as SPL_OS_BOOT_KEY */
> +#define CONFIG_OMAP3_GPIO_2
> +
>  #endif /* __CONFIG_H */
> 


Acked-by: Stefano Babic <sbabic at denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================