[U-Boot] [PATCH v2 07/13] lib: tizen: change Tizen logo with the new one.

Przemyslaw Marczak p.marczak at samsung.com
Fri Dec 20 12:50:11 CET 2013


Dear Hyungwon,

On 12/20/2013 06:07 AM, Hyungwon Hwang wrote:
> Hi, Marczak
>
> On Thu, 19 Dec 2013 11:40:26 +0100
> Przemyslaw Marczak <p.marczak at samsung.com> wrote:
>
>> Hello Hyungwon,
>>
>> On 12/19/2013 06:40 AM, 황형원 wrote:
>>> Hi, Marczak.
>>>
>>> Is this logo image what I sent you before?
>>>
>>> It's a little different what we use,
>>> and also the logo image is not aligned center horizontally.
>>>
>>> Best regards,
>>> Hyungwon Hwang
>>>
>>
>> This is not a logo which you sent me. Your logo has 24BPP and actually
>> it has displayed correctly because of fimd 24bpp mode. When I tried to
>> convert it to 16bpp with gimp, it was not displayed correctly in 16bpp
>> mode, there was some lines shift on display so I took logo from
>> tizen.org and resized it to 500x160 - now it's looking good.
>>
>> This is the logo location:
>> https://download.tizen.org/misc/Tizen-Brand/01-Primary-Assets/Lockup/On-Dark/01-RGB/Tizen-Lockup-On-Dark-RGB.png
>>
>> I can add some x and y offsets to make word "TIZEN" aligned center.
>> If this logo is really bad, then can you share logo in PNG format? Or
>> BMP 16bpp?
>
> The logo file is OK. Could you adjust alignment?
> Also, I think that anti-aliasing is needed.
> We can see stair-stepping appearance in diagonal lines.
> Can you fix it?
>
>>
>> Regards.
>
>
>
> ---
> Hyungwon Hwang
> Samsung SWC S/W Platform Team
> Smasung Electronics
> human.hwang at samsung.com
>

You're right the picture size scalling method which I have chosen was 
not good enough. I fixed it and now logo quality is much better. I also 
introduced logo x and y offset in struct vidinfo, so function get logo 
will be looking like this:

file: lib/tizen/tizen.c

  void get_tizen_logo_info(vidinfo_t *vid)
  {
-	switch (vid->resolution) {
-	case HD_RESOLUTION:
-		vid->logo_width = TIZEN_HD_LOGO_WIDTH;
-		vid->logo_height = TIZEN_HD_LOGO_HEIGHT;
-		vid->logo_addr = (ulong)tizen_hd_logo;
+	switch (vid->vl_bpix) {
+	case 4:
+		vid->logo_width = TIZEN_LOGO_16BPP_WIDTH;
+		vid->logo_height = TIZEN_LOGO_16BPP_HEIGHT;
+		vid->logo_x_offset = TIZEN_LOGO_16BPP_X_OFFSET;
+		vid->logo_y_offset = TIZEN_LOGO_16BPP_Y_OFFSET;
+#if defined(CONFIG_VIDEO_BMP_GZIP)
+		vid->logo_addr = (ulong)tizen_logo_16bpp_gzip;
+#else
+		vid->logo_addr = (ulong)tizen_logo_16bpp;
+#endif
  		break;
  	default:
+		vid->logo_addr = 0;
  		break;
  	}
  }

and set logo position before display:
file: board/samsung/common/misc.c

	x = ((panel_info.vl_width - panel_info.logo_width) >> 1);
+	x += panel_info.logo_x_offset; /* For X center align */

	y = ((panel_info.vl_height - panel_info.logo_height) >> 1);
+	y += panel_info.logo_y_offset; /* For Y center align */

So every new logo in future could be simply center-aligned.
Is it ok?
Regards,

-- 
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com


More information about the U-Boot mailing list