[U-Boot] [PATCH v5 03/10] sf: ops: Add configuration register writing support

[Jagannadha Sutradharudu Teki]

This patch provides support to program a flash config register.

Configuration register contains the control bits used to configure
the different configurations and security features of a device.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
---
 drivers/mtd/spi/sf_ops.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
index 3d304ce..39e06ec 100644
--- a/drivers/mtd/spi/sf_ops.c
+++ b/drivers/mtd/spi/sf_ops.c
@@ -38,6 +38,30 @@ int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr)
 	return 0;
 }
 
+static int spi_flash_cmd_write_config(struct spi_flash *flash, u8 cr)
+{
+	u8 data[2];
+	u8 cmd;
+	int ret;
+
+	cmd = CMD_READ_STATUS;
+	ret = spi_flash_read_common(flash, &cmd, 1, &data[0], 1);
+	if (ret < 0) {
+		debug("SF: fail to read status register\n");
+		return ret;
+	}
+
+	cmd = CMD_WRITE_STATUS;
+	data[1] = cr;
+	ret = spi_flash_write_common(flash, &cmd, 1, &data, 2);
+	if (ret) {
+		debug("SF: fail to write config register\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 #ifdef CONFIG_SPI_FLASH_BAR
 static int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel)
 {
-- 
1.8.3