[U-Boot] Pull request: u-boot-arm/master
Tom Rini
trini at ti.com
Wed Dec 11 17:44:21 CET 2013
On Tue, Dec 10, 2013 at 11:05:27PM +0100, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> f44483b57c49282299da0e5c10073b909cdad979:
>
> Merge branch 'serial' of git://git.denx.de/u-boot-microblaze
> (2013-12-02 08:48:02 -0500)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to f15ea6e1d67782a1626d4a4922b6c20e380085e5:
>
> Merge branch 'u-boot/master' into 'u-boot-arm/master' (2013-12-10
> 22:23:59 +0100)
>
> Note: two in-merge fixes were necessary. They are listed in
> f15ea6e1.
>
> ----------------------------------------------------------------
>
> Albert ARIBAUD (7):
> Merge branch 'u-boot-microblaze/zynq' into 'u-boot-arm/master'
> Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> arm: keep all sections in ELF file
> Merge branch 'u-boot/master' into 'u-boot-arm/master'
>
> Andreas Bie??mann (10):
> video: remove AT91 legacy API from bus_vcxk
> i2c: switch from AT91 legacy to ATMEL legacy
> at91sam9m10g45ek: remove unused CONFIG_AT91_LEGACY
> snapper9260: remove unused AT91_LEGACY
> net: remove unused CONFIG_AT91_LEGACY
> at91: remove all occourances of CONFIG_AT91_LEGACY
> at91: add new gpio pin definitions
> at91: redefine legacy GPIO PIN_BASE
> at91: nand: switch atmel_nand to generic GPIO API
> at91: switch coloured LED to gpio API
>
> Andrew Bradford (1):
> am335x_evm: Fix CONS_INDEX numbering
>
> Bo Shen (8):
> arm: atmel: sama5d3: correct the ID for DBGU and PIT
> arm: at91: pm9261: remove undefined bit in mckr
> arm: atmel: sama5d3: correct the error define of DIV
> arm: atmel: sama5d3: the offset of MULA is 18
> arm: atmel: sama5d3: early enable PIO peripherals
> arm: atmel: add ddr2 initialization function
> arm: atmel: sama5d3: spl boot from fat fs SD card
> arm: atmel: sam9m10g45ek: let CONFIG_SYS_NO_FLASH at proper
> position
>
> Chin Liang See (1):
> socfpga: Adding Freeze Controller driver
>
> Hardik Patel (1):
> pandaboard: 1/1] ARM:OMAP4+: panda-es: Support Rev B3 Elpida DDR2
> RAM
>
> Heiko Schocher (6):
> bootcount: store bootcount var in environment
> arm, am33x: make RTC32K OSC enable configurable
> usb, g_dnl: make bcdDevice value configurable
> arm926ejs, at91: add common phy_reset function
> arm, at91: add Siemens board taurus and axm
> arm, at91: add siemens corvus board
>
> Ian Campbell (1):
> vexpress: use correct timer address on extended memory map systems
>
> Igor Grinberg (1):
> cm-t35: use gpio_led driver for status led
>
> Ilya Ledvich (3):
> cm_t335: add cm_t335 board support
> cm_t335: add support for status LED
> cm_t335: add support for pca9555 i2c gpio extender
>
> Jaehoon Chung (3):
> arm: exynos: fix set_mmc_clk for exynos4x12
> arm: exynos/goni: fix the return type for s5p_mmc_init
> arm: exynos: remove the unused define.
>
> Jens Scharsig (BuS Elektronik) (1):
> arm: atmel: eb_cpux9k2: config clean up
>
> Lars Poeschel (1):
> pcm051: Support for revision 3
>
> Lokesh Vutla (1):
> ARM: OMAP5+: Remove unnecessary EFUSE settings
>
> Lubomir Popov (1):
> ARM: OMAP4: Fix bug in omap4470_volts struct
>
> Luka Perkov (1):
> config: arm: exynos5250: remove duplicate defines
>
> Masahiro Yamada (1):
> ARM: align MVBAR on 32 byte boundary
>
> Mateusz Kulikowski (1):
> arm: at91: support for the Calao USB-A9263 board (based on
> AT91SAM9263)
>
> Matt Porter (1):
> boards.cfg: update email address for ti814x_evm maintainer
>
> Michael Trimarchi (2):
> arm: omap3: Add uart4 omap3 adddress
> arm: omap3: Enable clocks for peripherals only if they are used
>
> Michal Simek (1):
> arm: zynq: Do not remap OCM to high address
>
> Minkyu Kang (3):
> arm: exynos: fix the align for exynos4_power structure
> arm: exynos: adds ifdef for spi boot
> arm: arndale: disable spi boot
>
> Nobuhiro Iwamatsu (7):
> arm: rmobile: Move lowlevel_init.o to taget of each CPU
> arm: rmobile: Add support R8A7790
> arm: rmobile: Add support lager board
> arm: rmobile: Add support R8A7791
> arm: rmobile: Add support koelsch board
> arm: kzm9g: Fix undefined reference to `__aeabi_uldivmod' error
> arm: rmobile: Remove config.mk
>
> Oleg Kosheliev (2):
> ARMV7: OMAP4: Add struct for twl603x data
> ARMV7: OMAP4: Add twl6032 support
>
> Piotr Wilczek (7):
> driver:usb:s3c_udc: add support for Exynos4x12
> trats2: enable ums support on Trats2
> trats2: enable dfu and thor protocol for Tizen download
> board: trats2: remove unused defines from config file
> board: trats2: fix environmental variables
> board: trats2: fix access to samsung registers
> board: trats2: update Tizen partition definitions
>
> Przemyslaw Marczak (1):
> trats: usb: Add usb_cable_connected() function
>
> Radhey Shyam Pandey (1):
> arm: zynq : Revert TZ_DDR_RAM to secure.
>
> Rajeshwari Shinde (1):
> exynos: spl: Add a custom spi copy function
>
> Roger Quadros (11):
> ahci: Error out with message on malloc() failure
> ahci: Fix cache align error messages
> ARM: OMAP5: Add Pipe3 PHY driver
> ARM: OMAP5: Add PRCM and Control information for SATA
> ARM: OMAP5: Add SATA platform glue
> ARM: omap5_uevm: Add SATA support
> ARM: DRA7xx: Add PRCM and Control information for SATA
> ARM: dra7_evm: Add SATA support
> usb: ehci-omap: Reset the USB Host OMAP module
> omap3_beagle: Don't use ulpi_reset
> omap4_panda: Don't use ulpi_reset
>
> SRICHARAN R (3):
> ARM: DRA7: Add is_dra7xx cpu check definition
> ARM: DRA: EMIF: Change DDR3 settings to use hw leveling
> ARM: DRA7/OMAP5: EMIF: Add workaround for bug 0039
>
> Samuel Egli (1):
> arm, am335x: update for the siemens boards
>
> Soren Brinkmann (1):
> serial: zynq: Remove unused #defines
>
> Stefan Roese (1):
> arm: am335x: Add DT (FDT) support to Siemens boards
>
> Tom Rini (5):
> am33xx: Make SoC bootcount driver have its own symbol
> omap730p2: Remove board
> am33xx: Stop modifying certain EMIF4D registers
> am335x_evm: Update nandboot to use partitions and DT
> AM3517 EVM: Enable ethernet
>
> Viktar Palstsiuk (1):
> davinci: fix Master Priority Registers location
>
> Vladimir Koutny (1):
> am335x: cpsw: optimize cpsw_recv to increase network performance
>
> Wu, Josh (1):
> ARM: at91: sama5d3: add support for sama5d36 chip
>
> Makefile | 2 +-
> README | 19 +
> arch/arm/config.mk | 3 +
> arch/arm/cpu/Makefile | 1 +
> arch/arm/cpu/arm926ejs/at91/led.c | 16 +-
> arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 16 +-
> arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 16 +-
> arch/arm/cpu/armv7/Makefile | 2 +-
> arch/arm/cpu/armv7/am33xx/board.c | 4 +
> arch/arm/cpu/armv7/am33xx/ddr.c | 7 -
> arch/arm/cpu/armv7/at91/sama5d3_devices.c | 6 +-
> arch/arm/cpu/armv7/at91/timer.c | 2 +-
> arch/arm/cpu/armv7/exynos/clock.c | 3 +-
> arch/arm/cpu/armv7/exynos/pinmux.c | 2 +-
> arch/arm/cpu/armv7/exynos/spl_boot.c | 126 +-
> arch/arm/cpu/armv7/nonsec_virt.S | 2 +-
> arch/arm/cpu/armv7/omap-common/Makefile | 5 +
> arch/arm/cpu/armv7/omap-common/emif-common.c | 142 ++-
> arch/arm/cpu/armv7/omap-common/pipe3-phy.c | 231 ++++
> arch/arm/cpu/armv7/omap-common/pipe3-phy.h | 36 +
> arch/arm/cpu/armv7/omap-common/sata.c | 75 ++
> arch/arm/cpu/armv7/omap3/clock.c | 2 -
> arch/arm/cpu/armv7/omap4/hw_data.c | 12 +-
> arch/arm/cpu/armv7/omap4/sdram_elpida.c | 9 +-
> arch/arm/cpu/armv7/omap5/hw_data.c | 9 +-
> arch/arm/cpu/armv7/omap5/hwinit.c | 18 +-
> arch/arm/cpu/armv7/omap5/prcm-regs.c | 7 +
> arch/arm/cpu/armv7/omap5/sdram.c | 214 +++-
> arch/arm/cpu/armv7/rmobile/Makefile | 11 +-
> arch/arm/cpu/armv7/rmobile/config.mk | 9 -
> arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c | 22 +
> arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c | 29 +
> arch/arm/cpu/armv7/rmobile/cpu_info.c | 10 +
> arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S | 60 +
> arch/arm/cpu/armv7/rmobile/pfc-r8a7790.c | 829 +++++++++++++
> arch/arm/cpu/armv7/rmobile/pfc-r8a7790.h | 92 ++
> arch/arm/cpu/armv7/rmobile/pfc-r8a7791.c | 1117
> ++++++++++++++++++ arch/arm/cpu/armv7/rmobile/timer.c
> | 8 +- arch/arm/cpu/armv7/socfpga/Makefile | 2 +-
> arch/arm/cpu/armv7/socfpga/freeze_controller.c | 215 ++++
> arch/arm/cpu/armv7/socfpga/spl.c | 9 +
> arch/arm/cpu/armv7/zynq/cpu.c | 9 +-
> arch/arm/cpu/at91-common/Makefile | 12 +
> arch/arm/cpu/at91-common/mpddrc.c | 124 ++
> arch/arm/cpu/at91-common/phy.c | 57 +
> arch/arm/cpu/at91-common/spl.c | 90 ++
> arch/arm/cpu/at91-common/u-boot-spl.lds | 50 +
> arch/arm/cpu/ixp/u-boot.lds | 15 +-
> arch/arm/cpu/u-boot-spl.lds | 15 +-
> arch/arm/cpu/u-boot.lds | 18 +-
> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 37 +-
> arch/arm/include/asm/arch-at91/at91_common.h | 5 +
> arch/arm/include/asm/arch-at91/at91_pio.h | 33 -
> arch/arm/include/asm/arch-at91/at91_pit.h | 16 -
> arch/arm/include/asm/arch-at91/at91_pmc.h | 59 +-
> arch/arm/include/asm/arch-at91/at91_spi.h | 2 +-
> arch/arm/include/asm/arch-at91/at91_wdt.h | 21 -
> arch/arm/include/asm/arch-at91/at91cap9.h | 69 --
> arch/arm/include/asm/arch-at91/at91sam9_smc.h | 60 -
> arch/arm/include/asm/arch-at91/atmel_mpddrc.h | 115 ++
> arch/arm/include/asm/arch-at91/gpio.h | 26 +-
> arch/arm/include/asm/arch-at91/sama5d3.h | 3 +
> arch/arm/include/asm/arch-at91/spl.h | 20 +
> arch/arm/include/asm/arch-davinci/hardware.h | 3 +-
> arch/arm/include/asm/arch-exynos/dwmmc.h | 4 -
> arch/arm/include/asm/arch-exynos/mmc.h | 2 +-
> arch/arm/include/asm/arch-exynos/power.h | 2 +-
> arch/arm/include/asm/arch-exynos/spi.h | 1 +
> arch/arm/include/asm/arch-omap3/clock.h | 2 -
> arch/arm/include/asm/arch-omap3/omap3.h | 1 +
> arch/arm/include/asm/arch-omap4/sys_proto.h | 4 +
> arch/arm/include/asm/arch-omap5/clock.h | 3 +
> arch/arm/include/asm/arch-omap5/omap.h | 4 +
> arch/arm/include/asm/arch-omap5/sata.h | 48 +
> arch/arm/include/asm/arch-rmobile/gpio.h | 6 +
> arch/arm/include/asm/arch-rmobile/r8a7790-gpio.h | 387 +++++++
> arch/arm/include/asm/arch-rmobile/r8a7790.h | 614 ++++++++++
> arch/arm/include/asm/arch-rmobile/r8a7791-gpio.h | 438 +++++++
> arch/arm/include/asm/arch-rmobile/r8a7791.h | 664 +++++++++++
> arch/arm/include/asm/arch-rmobile/rmobile.h | 4 +
> arch/arm/include/asm/arch-s5pc1xx/mmc.h | 2 +-
> .../include/asm/arch-socfpga/freeze_controller.h | 50 +
> arch/arm/include/asm/emif.h | 14 +-
> arch/arm/include/asm/omap_common.h | 10 +
> board/BuS/vl_ma2sc/vl_ma2sc.c | 23 +-
> board/actux1/u-boot.lds | 15 +-
> board/actux2/u-boot.lds | 15 +-
> board/actux3/u-boot.lds | 15 +-
> board/afeb9260/afeb9260.c | 18 +-
> board/atmel/at91sam9260ek/at91sam9260ek.c | 19 +-
> board/atmel/at91sam9263ek/at91sam9263ek.c | 19 +-
> board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 19 +-
> board/atmel/sama5d3xek/sama5d3xek.c | 91 ++
> board/bluewater/snapper9260/snapper9260.c | 16 +-
> board/calao/sbc35_a9g20/sbc35_a9g20.c | 19 +-
> board/calao/usb_a9263/Makefile | 14 +
> board/calao/usb_a9263/usb_a9263.c | 148 +++
> board/compulab/cm_t335/Makefile | 10 +
> board/compulab/cm_t335/cm_t335.c | 162 +++
> board/compulab/cm_t335/mux.c | 117 ++
> board/compulab/cm_t335/spl.c | 106 ++
> board/compulab/cm_t335/u-boot.lds | 101 ++
> board/compulab/cm_t35/Makefile | 2 +-
> board/compulab/cm_t35/leds.c | 33 -
> board/dvlhost/u-boot.lds | 15 +-
> board/egnite/ethernut5/ethernut5.c | 3 +-
> board/esd/meesc/meesc.c | 5 +-
> board/esd/otc570/otc570.c | 5 +-
> board/eukrea/cpu9260/cpu9260.c | 23 +-
> board/freescale/mx31ads/u-boot.lds | 18 +-
> board/isee/igep0033/board.c | 4 -
> board/phytec/pcm051/board.c | 53 +-
> board/renesas/koelsch/Makefile | 9 +
> board/renesas/koelsch/koelsch.c | 283 +++++
> board/renesas/koelsch/qos.c | 1220
> ++++++++++++++++++++
> board/renesas/koelsch/qos.h | 12 +
> board/renesas/lager/Makefile | 9 +
> board/renesas/lager/lager.c | 287 +++++
> board/renesas/lager/qos.c | 1119
> ++++++++++++++++++ board/renesas/lager/qos.h
> | 12 + board/ronetix/pm9261/led.c | 14 +-
> board/ronetix/pm9261/pm9261.c | 5 +-
> board/ronetix/pm9263/led.c | 10 +-
> board/ronetix/pm9263/pm9263.c | 5 +-
> board/ronetix/pm9g45/pm9g45.c | 5 +-
> board/samsung/trats/trats.c | 11 +
> board/samsung/trats2/trats2.c | 108 +-
> board/siemens/common/factoryset.c | 24 +-
> board/siemens/common/factoryset.h | 2 +
> board/siemens/corvus/Makefile | 18 +
> board/siemens/corvus/board.c | 195 ++++
> board/siemens/dxr2/board.c | 15 +-
> board/siemens/dxr2/board.h | 9 +-
> board/siemens/dxr2/mux.c | 158 +++
> board/siemens/pxm2/board.c | 8 +-
> board/siemens/rut/board.c | 56 +-
> board/siemens/taurus/Makefile | 18 +
> board/siemens/taurus/taurus.c | 160 +++
> board/taskit/stamp9g20/stamp9g20.c | 31 +-
> board/ti/am335x/board.c | 17 -
> board/ti/am335x/u-boot.lds | 15 +-
> board/ti/dra7xx/evm.c | 7 +
> board/ti/omap5_uevm/evm.c | 7 +
> board/ti/omap730p2/Makefile | 9 -
> board/ti/omap730p2/README.omap730p2 | 91 --
> board/ti/omap730p2/config.mk | 25 -
> board/ti/omap730p2/flash.c | 463 --------
> board/ti/omap730p2/lowlevel_init.S | 379 ------
> board/ti/omap730p2/omap730p2.c | 255 ----
> board/ti/panda/panda.c | 60 +
> board/ti/ti814x/evm.c | 5 -
> board/ti/ti816x/evm.c | 17 -
> board/vpac270/u-boot-spl.lds | 18 +-
> boards.cfg | 27 +-
> doc/README.at91-soc | 7 +
> doc/README.scrapyard | 5 +-
> drivers/block/ahci.c | 18 +-
> drivers/bootcount/Makefile | 3 +-
> drivers/bootcount/bootcount_davinci.c | 4 +
> drivers/bootcount/bootcount_env.c | 29 +
> drivers/gpio/at91_gpio.c | 4 +-
> drivers/i2c/soft_i2c.c | 2 +-
> drivers/mtd/nand/atmel_nand.c | 8 +-
> drivers/net/at91_emac.c | 9 -
> drivers/net/cpsw.c | 2 +-
> drivers/power/twl6030.c | 77 +-
> drivers/usb/gadget/g_dnl.c | 23 +-
> drivers/usb/gadget/regs-otg.h | 5 +
> drivers/usb/gadget/s3c_udc_otg.c | 9 +-
> drivers/usb/host/ehci-omap.c | 57 +-
> drivers/video/bus_vcxk.c | 15 -
> include/configs/afeb9260.h | 2 +-
> include/configs/am335x_evm.h | 13 +-
> include/configs/am3517_evm.h | 14 +-
> include/configs/arndale.h | 4 -
> include/configs/at91sam9260ek.h | 1 +
> include/configs/at91sam9263ek.h | 1 +
> include/configs/at91sam9m10g45ek.h | 9 +-
> include/configs/at91sam9n12ek.h | 4 +-
> include/configs/cm_t335.h | 182 +++
> include/configs/cm_t35.h | 9 +-
> include/configs/corvus.h | 165 +++
> include/configs/cpu9260.h | 5 +-
> include/configs/dra7xx_evm.h | 11 +
> include/configs/dxr2.h | 13 +-
> include/configs/eb_cpux9k2.h | 4 -
> include/configs/ethernut5.h | 2 +-
> include/configs/exynos5250-dt.h | 25 +-
> include/configs/h2_p2_dbg_board.h | 120 --
> include/configs/koelsch.h | 133 +++
> include/configs/lager.h | 141 +++
> include/configs/meesc.h | 4 +-
> include/configs/omap3_beagle.h | 3 -
> include/configs/omap4_panda.h | 3 -
> include/configs/omap5_uevm.h | 10 +
> include/configs/omap730.h | 246 ----
> include/configs/omap730p2.h | 173 ---
> include/configs/otc570.h | 4 +-
> include/configs/pm9261.h | 16 +-
> include/configs/pm9263.h | 8 +-
> include/configs/pm9g45.h | 8 +-
> include/configs/pxm2.h | 7 +-
> include/configs/rut.h | 10 +-
> include/configs/sama5d3xek.h | 34 +
> include/configs/sbc35_a9g20.h | 1 +
> include/configs/siemens-am33x-common.h | 74 +-
> include/configs/snapper9260.h | 2 +-
> include/configs/stamp9g20.h | 1 +
> include/configs/taurus.h | 160 +++
> include/configs/ti_am335x_common.h | 5 +-
> include/configs/trats.h | 1 +
> include/configs/trats2.h | 68 +-
> include/configs/usb_a9263.h | 169 +++
> include/configs/vexpress_common.h | 2 +-
> include/configs/vl_ma2sc.h | 5 +-
> include/i2c.h | 2 +-
> include/twl6030.h | 38 + 217 files
> changed, 12160 insertions(+), 2834 deletions(-) create mode 100644
> arch/arm/cpu/armv7/omap-common/pipe3-phy.c create mode 100644
> arch/arm/cpu/armv7/omap-common/pipe3-phy.h create mode 100644
> arch/arm/cpu/armv7/omap-common/sata.c delete mode 100644
> arch/arm/cpu/armv7/rmobile/config.mk create mode 100644
> arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c create mode 100644
> arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c create mode 100644
> arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S create mode 100644
> arch/arm/cpu/armv7/rmobile/pfc-r8a7790.c create mode 100644
> arch/arm/cpu/armv7/rmobile/pfc-r8a7790.h create mode 100644
> arch/arm/cpu/armv7/rmobile/pfc-r8a7791.c create mode 100644
> arch/arm/cpu/armv7/socfpga/freeze_controller.c create mode 100644
> arch/arm/cpu/at91-common/Makefile create mode 100644
> arch/arm/cpu/at91-common/mpddrc.c create mode 100644
> arch/arm/cpu/at91-common/phy.c create mode 100644
> arch/arm/cpu/at91-common/spl.c create mode 100644
> arch/arm/cpu/at91-common/u-boot-spl.lds create mode 100644
> arch/arm/include/asm/arch-at91/atmel_mpddrc.h create mode 100644
> arch/arm/include/asm/arch-at91/spl.h create mode 100644
> arch/arm/include/asm/arch-omap5/sata.h create mode 100644
> arch/arm/include/asm/arch-rmobile/r8a7790-gpio.h create mode 100644
> arch/arm/include/asm/arch-rmobile/r8a7790.h create mode 100644
> arch/arm/include/asm/arch-rmobile/r8a7791-gpio.h create mode 100644
> arch/arm/include/asm/arch-rmobile/r8a7791.h create mode 100644
> arch/arm/include/asm/arch-socfpga/freeze_controller.h create mode
> 100644 board/calao/usb_a9263/Makefile create mode 100644
> board/calao/usb_a9263/usb_a9263.c create mode 100644
> board/compulab/cm_t335/Makefile create mode 100644
> board/compulab/cm_t335/cm_t335.c create mode 100644
> board/compulab/cm_t335/mux.c create mode 100644
> board/compulab/cm_t335/spl.c create mode 100644
> board/compulab/cm_t335/u-boot.lds delete mode 100644
> board/compulab/cm_t35/leds.c create mode 100644
> board/renesas/koelsch/Makefile create mode 100644
> board/renesas/koelsch/koelsch.c create mode 100644
> board/renesas/koelsch/qos.c create mode 100644
> board/renesas/koelsch/qos.h create mode 100644
> board/renesas/lager/Makefile create mode 100644
> board/renesas/lager/lager.c create mode 100644
> board/renesas/lager/qos.c create mode 100644 board/renesas/lager/qos.h
> create mode 100644 board/siemens/corvus/Makefile
> create mode 100644 board/siemens/corvus/board.c
> create mode 100644 board/siemens/taurus/Makefile
> create mode 100644 board/siemens/taurus/taurus.c
> delete mode 100644 board/ti/omap730p2/Makefile
> delete mode 100644 board/ti/omap730p2/README.omap730p2
> delete mode 100644 board/ti/omap730p2/config.mk
> delete mode 100644 board/ti/omap730p2/flash.c
> delete mode 100644 board/ti/omap730p2/lowlevel_init.S
> delete mode 100644 board/ti/omap730p2/omap730p2.c
> create mode 100644 drivers/bootcount/bootcount_env.c
> create mode 100644 include/configs/cm_t335.h
> create mode 100644 include/configs/corvus.h
> delete mode 100644 include/configs/h2_p2_dbg_board.h
> create mode 100644 include/configs/koelsch.h
> create mode 100644 include/configs/lager.h
> delete mode 100644 include/configs/omap730.h
> delete mode 100644 include/configs/omap730p2.h
> create mode 100644 include/configs/taurus.h
> create mode 100644 include/configs/usb_a9263.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131211/d16bcd6a/attachment.pgp>
More information about the U-Boot
mailing list