[U-Boot] [PATCH v5 00/10] sf: Add Extended read and quad read/write commands support

Jagannadha Sutradharudu Teki jagannadha.sutradharudu-teki at xilinx.com
Thu Dec 26 11:26:17 CET 2013


This a suffix series for 
http://u-boot.10912.n7.nabble.com/PATCH-v4-00-36-sf-Add-common-probe-and-extended-quad-read-write-cmds-support-td163949.html
for adding extended read and quad read/write commands support.

Concept:
"Implementation will discover the fastest command by taking the supported
commands from flash and a controller. Controller supported commands will always been a priority."

The above concept is changed in this series as couple of reviews from earlier ones.
- Implementation concept will apply on read commands.
- As we have two write commands as of now – so this series is not trying to 
  discover the fastest write command
- The respective command modes are given to the controller driver side as a form of
  SPI RX/RX operation modes - so sf definitions will not be part of SPI driver side.

Testing branch:
$ git clone git://git.denx.de/u-boot-spi.git 
$ cd u-boot-spi 
$ git checkout -b master-quad origin/master-quad

REQUEST FOR ALL SPI CODE CONTRIBUTORS/USERS, PLEASE TEST THESE CHANGES 
W.R.T YOUR HW IF POSSIBLE. 

Please let me know for any issues/concerns/questions.

--
Thanks,
Jagan. 

Changes for v5:
	- Re-implemented write command log - not trying to discover the fastest write
	- Added SPI RX/TX operation modes
	- SPI flash parts are moved into sf_params.c file
	- Added QUAD_IO_FAST read support
	- Discovred the read dummy_cycles based on configured read cmd
	- Added set QEB support for macronix flash
	- Enabled quad read/write cmd support for macronix flash
Changes for v4:
Changes for v3:
Changes for v2:
	- none

Jagannadha Sutradharudu Teki (10):
  sf: Add extended read commands support
  sf: Add quad read/write commands support
  sf: ops: Add configuration register writing support
  sf: Set quad enable bit support
  sf: probe: Enable RD_FULL and WR_QPP
  sf: Separate the flash params table
  sf: Add QUAD_IO_FAST read support
  sf: Discover read dummy_cycles
  sf: Add macronix set QEB support
  sf: probe: Enable macronix quad read/write cmds support

 drivers/mtd/spi/Makefile      |   4 +-
 drivers/mtd/spi/sf_internal.h |  22 ++++-
 drivers/mtd/spi/sf_ops.c      |  90 +++++++++++++++++--
 drivers/mtd/spi/sf_params.c   | 130 +++++++++++++++++++++++++++
 drivers/mtd/spi/sf_probe.c    | 204 ++++++++++++++----------------------------
 include/spi.h                 |  17 ++++
 include/spi_flash.h           |  43 +++++++++
 7 files changed, 365 insertions(+), 145 deletions(-)
 create mode 100644 drivers/mtd/spi/sf_params.c

-- 
1.8.3




More information about the U-Boot mailing list