[U-Boot] [PATCH V3 00/14] ARM: AM43xx: Update support for AM4372 SoC
Lokesh Vutla
lokeshvutla at ti.com
Thu Dec 19 18:57:05 CET 2013
On Thursday 19 December 2013 10:30 PM, Tom Rini wrote:
> On Wed, Dec 18, 2013 at 03:07:47PM -0500, Tom Rini wrote:
>> On Tue, Dec 10, 2013 at 03:02:10PM +0530, Lokesh Vutla wrote:
>>
>>> This Patch series updates support for AM4372 EPOS and GP EVM boards.
>>> AM4372 is a low cost Cortex-A9 based application processor targeted at existing
>>> ARM9/ARM11 base of customers that need more processing capabilities.
>>> Currently there are two boards with AM4372 SoC: EPOS and GP EVM.
>>> Except for few differences like oscillator clock and SDRAM both EPOS and GP EVM
>>> boards are similar.
>>> EPOS EVM:
>>> OSC clk : 25MHz
>>> DDR : LPDDR2 @ 266MHz (MT42L256M32D2LG-25 WT:A)
>>> GP EVM:
>>> OSC clk : 24MHz
>>> DDR : DDR3 @ 400MHz(MT41K512M8RH)
>>>
>>> This patch series is applied on top of Mainline U-Boot Tree and two
>>> patches mentioned below:
>>> git://git.denx.de/u-boot.git master
>>> http://patchwork.ozlabs.org/patch/288175/
>>>
>>> Testing:
>>> -> Boot tested on AM4372 EPOS and GP EVMs, Beaglebone Black.
>>> -> verified MAKEALL -s am33xx.
>>> -> Ran checkpatch on all patches.
>>>
>>> Changes Since V2:
>>> -> Updating the base offsets only for AM43xx
>>> -> Populated DPLLs data for all OPPs and SYS CLK inputs and the correct values
>>> to be read from eFuse.
>>> -> Seperated out ioregs changes into a new patch.
>>>
>>> Changes Since V1:
>>> As per Vaibhav's and Tom's Comments:
>>> -> Updated the mux data not to use DSPULLUDEN.
>>> -> Reused the emif4d file for configuring emif4d5 registers.
>>> -> Updated the code with comments.
>>> -> Rebased on top of Current U-Boot mainline.
>>>
>>> Lokesh Vutla (12):
>>> ARM: AM43xx: Update the base addresses of modules
>>> ARM: AM43xx: Adapt to ti_armv7_common.h config file
>>> ARM: AM43xx: Add L2 Support
>>> ARM: AM43xx: Add extra ENV settings
>>> ARM: AM43xx: Select clk source for Timer2
>>> ARM: AM43xx: Update Current Booting devices list
>>> ARM: AM43xx: mux: Update mux data
>>> ARM: AM43xx: clocks: Update DPLL details
>>> ARM: AM33xx+: Update ioregs to pass different values
>>> ARM: AM43xx: EPOS_EVM: Add support for LPDDR2
>>> ARM: AM43xx: GP_EVM: Add support for DDR3
>>> ARM: AM43xx: Add Maintainer
>>>
>>> Sekhar Nori (2):
>>> ARM: AM43XX: board: add support for reading onboard EEPROM
>>> ARM: AM43XX: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support
>>>
>>> arch/arm/cpu/armv7/am33xx/clock.c | 12 +-
>>> arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 15 +
>>> arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 12 +-
>>> arch/arm/cpu/armv7/am33xx/ddr.c | 146 +++++++-
>>> arch/arm/cpu/armv7/am33xx/emif4.c | 25 +-
>>> arch/arm/cpu/armv7/omap-common/emif-common.c | 14 -
>>> arch/arm/include/asm/arch-am33xx/clock.h | 7 +-
>>> arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 3 +
>>> arch/arm/include/asm/arch-am33xx/cpu.h | 24 +-
>>> arch/arm/include/asm/arch-am33xx/ddr_defs.h | 41 ++-
>>> arch/arm/include/asm/arch-am33xx/gpio.h | 12 +
>>> arch/arm/include/asm/arch-am33xx/hardware.h | 7 -
>>> arch/arm/include/asm/arch-am33xx/hardware_am33xx.h | 2 +
>>> arch/arm/include/asm/arch-am33xx/hardware_am43xx.h | 16 +
>>> arch/arm/include/asm/arch-am33xx/mux_am43xx.h | 45 +++
>>> arch/arm/include/asm/arch-am33xx/omap.h | 4 +-
>>> arch/arm/include/asm/arch-am33xx/spl.h | 13 +-
>>> arch/arm/include/asm/emif.h | 26 ++
>>> board/isee/igep0033/board.c | 10 +-
>>> board/phytec/pcm051/board.c | 12 +-
>>> board/siemens/dxr2/board.c | 10 +-
>>> board/siemens/pxm2/board.c | 10 +-
>>> board/siemens/rut/board.c | 10 +-
>>> board/ti/am335x/board.c | 40 ++-
>>> board/ti/am43xx/board.c | 355 +++++++++++++++++++-
>>> board/ti/am43xx/board.h | 36 ++
>>> board/ti/am43xx/mux.c | 35 +-
>>> board/ti/ti814x/evm.c | 4 +-
>>> board/ti/ti816x/evm.c | 12 +-
>>> boards.cfg | 2 +-
>>> include/configs/am43xx_evm.h | 204 +++++------
>>> 31 files changed, 983 insertions(+), 181 deletions(-)
>>
>> Applied to u-boot-ti/master, thanks!
>
> Note that I've had to update this patch series to fix cm_t335 support
> and cover pcm051_rev3. Also the dxr2 conversion wasn't quite right (it
> should have been populating based on settings.ddr3.ioctrl_val) so I
> fixed that up.
Oops..!! Sorry somehow overlooked these. Thanks a lot Tom.
Regards,
Lokesh
>
More information about the U-Boot
mailing list