[U-Boot] [PATCH v2 1/2] socfpga: Adding Scan Manager driver

Chin Liang See clsee at altera.com
Mon Dec 2 21:32:00 CET 2013


Scan Manager driver will be called to configure the IOCSR
scan chain. This configuration will setup the IO buffer settings

Signed-off-by: Chin Liang See <clsee at altera.com>
Cc: Dinh Nguyen <dinguyen at altera.com>
Cc: Wolfgang Denk <wd at denx.de>
CC: Pavel Machek <pavel at denx.de>
Cc: Tom Rini <trini at ti.com>
Cc: Albert Aribaud <albert.u.boot at aribaud.net>

Signed-off-by: Chin Liang See <clsee at altera.com>
---
Changes for v2
- rebase with latest v2014.01-rc1
---
 arch/arm/cpu/armv7/socfpga/Makefile                |    2 +-
 arch/arm/cpu/armv7/socfpga/scan_manager.c          |  231 ++++++++++++++++++++
 arch/arm/cpu/armv7/socfpga/spl.c                   |    4 +
 arch/arm/include/asm/arch-socfpga/scan_manager.h   |   97 ++++++++
 .../include/asm/arch-socfpga/socfpga_base_addrs.h  |    1 +
 include/configs/socfpga_cyclone5.h                 |    1 +
 6 files changed, 335 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/cpu/armv7/socfpga/scan_manager.c
 create mode 100644 arch/arm/include/asm/arch-socfpga/scan_manager.h

diff --git a/arch/arm/cpu/armv7/socfpga/Makefile b/arch/arm/cpu/armv7/socfpga/Makefile
index 3e84a0c..4edc5d4 100644
--- a/arch/arm/cpu/armv7/socfpga/Makefile
+++ b/arch/arm/cpu/armv7/socfpga/Makefile
@@ -9,4 +9,4 @@
 
 obj-y	:= lowlevel_init.o
 obj-y	+= misc.o timer.o reset_manager.o system_manager.o
-obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
+obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o scan_manager.o
diff --git a/arch/arm/cpu/armv7/socfpga/scan_manager.c b/arch/arm/cpu/armv7/socfpga/scan_manager.c
new file mode 100644
index 0000000..30cbb8b
--- /dev/null
+++ b/arch/arm/cpu/armv7/socfpga/scan_manager.c
@@ -0,0 +1,231 @@
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/freeze_controller.h>
+#include <asm/arch/scan_manager.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct socfpga_scan_manager *scan_manager_base =
+		(void *)(SOCFPGA_SCANMGR_ADDRESS);
+static const struct socfpga_freeze_controller *freeze_controller_base =
+		(void *)(SOCFPGA_SYSMGR_ADDRESS + SYSMGR_FRZCTRL_ADDRESS);
+
+/*
+ * Function to check IO scan chain engine status and wait if the engine is
+ * is active. Poll the IO scan chain engine till maximum iteration reached.
+ */
+static inline uint32_t scan_mgr_io_scan_chain_engine_is_idle(uint32_t max_iter)
+{
+	uint32_t scanmgr_status;
+
+	scanmgr_status = readl(&scan_manager_base->stat);
+
+	/* Poll the engine until the scan engine is inactive */
+	while (SCANMGR_STAT_ACTIVE_GET(scanmgr_status)
+		|| (SCANMGR_STAT_WFIFOCNT_GET(scanmgr_status) > 0)) {
+
+		max_iter--;
+
+		if (max_iter > 0)
+			scanmgr_status = readl(&scan_manager_base->stat);
+		else
+			return SCAN_MGR_IO_SCAN_ENGINE_STATUS_ACTIVE;
+	}
+	return SCAN_MGR_IO_SCAN_ENGINE_STATUS_IDLE;
+}
+
+
+
+/* Program HPS IO Scan Chain */
+uint32_t scan_mgr_io_scan_chain_prg(
+	uint32_t io_scan_chain_id,
+	uint32_t io_scan_chain_len_in_bits,
+	const uint32_t *iocsr_scan_chain)
+{
+
+	uint16_t tdi_tdo_header;
+	uint32_t io_program_iter;
+	uint32_t io_scan_chain_data_residual;
+	uint32_t residual;
+	uint32_t i;
+	uint32_t index = 0;
+
+	/* De-assert reinit if the IO scan chain is intended for HIO */
+	if (3 == io_scan_chain_id)
+		clrbits_le32(&freeze_controller_base->hioctrl,
+			SYSMGR_FRZCTRL_HIOCTRL_DLLRST_MASK);
+
+	/*
+	 * Check if the scan chain engine is inactive and the
+	 * WFIFO is empty before enabling the IO scan chain
+	 */
+	if (SCAN_MGR_IO_SCAN_ENGINE_STATUS_IDLE
+		!= scan_mgr_io_scan_chain_engine_is_idle(
+		MAX_WAITING_DELAY_IO_SCAN_ENGINE)) {
+		return 1;
+	}
+
+	/*
+	 * Enable IO Scan chain based on scan chain id
+	 * Note: only one chain can be enabled at a time
+	 */
+	setbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id);
+
+	/*
+	 * Calculate number of iteration needed for full 128-bit (4 x32-bits)
+	 * bits shifting. Each TDI_TDO packet can shift in maximum 128-bits
+	 */
+	io_program_iter	= io_scan_chain_len_in_bits >>
+		IO_SCAN_CHAIN_128BIT_SHIFT;
+	io_scan_chain_data_residual = io_scan_chain_len_in_bits &
+		IO_SCAN_CHAIN_128BIT_MASK;
+
+	/* Construct TDI_TDO packet for 128-bit IO scan chain (2 bytes) */
+	tdi_tdo_header = TDI_TDO_HEADER_FIRST_BYTE | (TDI_TDO_MAX_PAYLOAD <<
+		TDI_TDO_HEADER_SECOND_BYTE_SHIFT);
+
+	/* Program IO scan chain in 128-bit iteration */
+	for (i = 0; i < io_program_iter; i++) {
+
+		/* write TDI_TDO packet header to scan manager */
+		writel(tdi_tdo_header,	&scan_manager_base->fifodoublebyte);
+
+		/* calculate array index */
+		index = i * 4;
+
+		/* write 4 successive 32-bit IO scan chain data into WFIFO */
+		writel(iocsr_scan_chain[index],
+			&scan_manager_base->fifoquadbyte);
+		writel(iocsr_scan_chain[index + 1],
+			&scan_manager_base->fifoquadbyte);
+		writel(iocsr_scan_chain[index + 2],
+			&scan_manager_base->fifoquadbyte);
+		writel(iocsr_scan_chain[index + 3],
+			&scan_manager_base->fifoquadbyte);
+
+		/*
+		 * Check if the scan chain engine has completed the
+		 * IO scan chain data shifting
+		 */
+		if (SCAN_MGR_IO_SCAN_ENGINE_STATUS_IDLE
+			!= scan_mgr_io_scan_chain_engine_is_idle(
+			MAX_WAITING_DELAY_IO_SCAN_ENGINE)) {
+			/* Disable IO Scan chain when error detected */
+			clrbits_le32(&scan_manager_base->en,
+				1 << io_scan_chain_id);
+			return 1;
+		}
+	}
+
+	/* Calculate array index for final TDI_TDO packet */
+	index = io_program_iter * 4;
+
+	/* Final TDI_TDO packet if any */
+	if (0 != io_scan_chain_data_residual) {
+
+		/*
+		 * Calculate number of quad bytes FIFO write
+		 * needed for the final TDI_TDO packet
+		 */
+		io_program_iter	= io_scan_chain_data_residual >>
+			IO_SCAN_CHAIN_32BIT_SHIFT;
+
+		/*
+		 * Construct TDI_TDO packet for remaining IO
+		 * scan chain (2 bytes)
+		 */
+		tdi_tdo_header	= TDI_TDO_HEADER_FIRST_BYTE |
+			((io_scan_chain_data_residual - 1)
+			<< TDI_TDO_HEADER_SECOND_BYTE_SHIFT);
+
+		/*
+		 * Program the last part of IO scan chain write TDI_TDO packet
+		 * header (2 bytes) to scan manager
+		 */
+		writel(tdi_tdo_header, &scan_manager_base->fifodoublebyte);
+
+		for (i = 0; i < io_program_iter; i++) {
+			/*
+			 * write remaining scan chain data into scan
+			 * manager WFIFO with 4 bytes write
+			*/
+			writel(iocsr_scan_chain[index + i],
+				&scan_manager_base->fifoquadbyte);
+		}
+
+		index += io_program_iter;
+		residual = io_scan_chain_data_residual &
+			IO_SCAN_CHAIN_32BIT_MASK;
+
+		if (IO_SCAN_CHAIN_PAYLOAD_24BIT < residual) {
+			/*
+			 * write the last 4B scan chain data
+			 * into scan manager WFIFO
+			 */
+			writel(iocsr_scan_chain[index],
+				&scan_manager_base->fifoquadbyte);
+
+		} else {
+			/*
+			 * write the remaining 1 - 3 bytes scan chain
+			 * data into scan manager WFIFO byte by byte
+			 * to prevent JTAG engine shifting unused data
+			 * from the FIFO and mistaken the data as a
+			 * valid command (even though unused bits are
+			 * set to 0, but just to prevent hardware
+			 * glitch)
+			 */
+			for (i = 0; i < residual; i += 8) {
+				writel(((iocsr_scan_chain[index] >> i)
+					& IO_SCAN_CHAIN_BYTE_MASK),
+					&scan_manager_base->fifosinglebyte);
+
+			}
+		}
+
+		/*
+		 * Check if the scan chain engine has completed the
+		 * IO scan chain data shifting
+		 */
+		if (SCAN_MGR_IO_SCAN_ENGINE_STATUS_IDLE
+			!=  scan_mgr_io_scan_chain_engine_is_idle(
+			MAX_WAITING_DELAY_IO_SCAN_ENGINE)) {
+			/* Disable IO Scan chain when error detected */
+			clrbits_le32(&scan_manager_base->en,
+				1 << io_scan_chain_id);
+			return 1;
+		}
+	} /* if (io_scan_chain_data_residual) */
+
+	/* Disable IO Scan chain when configuration done*/
+	clrbits_le32(&scan_manager_base->en,
+		1 << io_scan_chain_id);
+
+	return 0;
+}
+
+int scan_mgr_configure_iocsr(void)
+{
+	int status = 0;
+
+	/* configure the IOCSR through scan chain */
+	status |= scan_mgr_io_scan_chain_prg(0,
+		CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH, iocsr_scan_chain0_table);
+	status |= scan_mgr_io_scan_chain_prg(1,
+		CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH, iocsr_scan_chain1_table);
+	status |= scan_mgr_io_scan_chain_prg(2,
+		CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH, iocsr_scan_chain2_table);
+	status |= scan_mgr_io_scan_chain_prg(3,
+		CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH, iocsr_scan_chain3_table);
+	return status;
+}
+
+
+
diff --git a/arch/arm/cpu/armv7/socfpga/spl.c b/arch/arm/cpu/armv7/socfpga/spl.c
index 36a00c3..8a49a1a 100644
--- a/arch/arm/cpu/armv7/socfpga/spl.c
+++ b/arch/arm/cpu/armv7/socfpga/spl.c
@@ -32,6 +32,10 @@ void spl_board_init(void)
 	/* freeze all IO banks */
 	sys_mgr_frzctrl_freeze_req();
 
+	/* configure the IOCSR / IO buffer settings */
+	if (scan_mgr_configure_iocsr())
+		hang();
+
 	/* configure the pin muxing through system manager */
 	sysmgr_pinmux_init();
 #endif /* CONFIG_SOCFPGA_VIRTUAL_TARGET */
diff --git a/arch/arm/include/asm/arch-socfpga/scan_manager.h b/arch/arm/include/asm/arch-socfpga/scan_manager.h
new file mode 100644
index 0000000..dfbfade
--- /dev/null
+++ b/arch/arm/include/asm/arch-socfpga/scan_manager.h
@@ -0,0 +1,97 @@
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef	_SCAN_MANAGER_H_
+#define	_SCAN_MANAGER_H_
+
+struct socfpga_scan_manager {
+	u32	stat;
+	u32	en;
+	u32	padding[2];
+	u32	fifosinglebyte;
+	u32	fifodoublebyte;
+	u32	fifoquadbyte;
+};
+
+/*
+ * Shift count to get number of IO scan chain data in granularity
+ * of 128-bit ( N / 128 )
+ */
+#define IO_SCAN_CHAIN_128BIT_SHIFT		(7)
+
+/*
+ * Mask to get residual IO scan chain data in
+ * granularity of 128-bit ( N mod 128 )
+ */
+#define IO_SCAN_CHAIN_128BIT_MASK		(0x7F)
+
+/*
+ * Shift count to get number of IO scan chain
+ * data in granularity of 32-bit ( N / 32 )
+ */
+#define IO_SCAN_CHAIN_32BIT_SHIFT		(5)
+
+/*
+ * Mask to get residual IO scan chain data in
+ * granularity of 32-bit ( N mod 32 )
+ */
+#define IO_SCAN_CHAIN_32BIT_MASK		(0x1F)
+
+/* Byte mask */
+#define IO_SCAN_CHAIN_BYTE_MASK			(0xFF)
+
+/* 24-bits (3 bytes) IO scan chain payload definition */
+#define IO_SCAN_CHAIN_PAYLOAD_24BIT		(24)
+
+/*
+ * Maximum length of TDI_TDO packet payload is 128 bits,
+ * represented by (length - 1) in TDI_TDO header
+ */
+#define TDI_TDO_MAX_PAYLOAD			(127)
+
+/* TDI_TDO packet header for IO scan chain program */
+#define TDI_TDO_HEADER_FIRST_BYTE		(0x80)
+
+/* Position of second command byte for TDI_TDO packet */
+#define TDI_TDO_HEADER_SECOND_BYTE_SHIFT	(8)
+
+/* IO scan chain engine is idle */
+#define SCAN_MGR_IO_SCAN_ENGINE_STATUS_IDLE	(0)
+
+/* IO scan chain engine is active */
+#define SCAN_MGR_IO_SCAN_ENGINE_STATUS_ACTIVE	(1)
+
+/*
+ * Maximum polling loop to wait for IO scan chain engine
+ * becomes idle to prevent infinite loop
+ */
+#define MAX_WAITING_DELAY_IO_SCAN_ENGINE	(100)
+
+#define SCANMGR_STAT_ACTIVE_GET(x) (((x) & 0x80000000) >> 31)
+#define SCANMGR_STAT_WFIFOCNT_GET(x) (((x) & 0x70000000) >> 28)
+
+/*
+ * Program HPS IO Scan Chain
+ * io_scan_chain_id - IO scan chain ID
+ * io_scan_chain_len_in_bits - IO scan chain length in bits
+ * iocsr_scan_chain - IO scan chain table
+ */
+uint32_t scan_mgr_io_scan_chain_prg(
+	uint32_t io_scan_chain_id,
+	uint32_t io_scan_chain_len_in_bits,
+	const uint32_t *iocsr_scan_chain);
+
+
+extern const uint32_t iocsr_scan_chain0_table[
+	((CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH / 32) + 1)];
+extern const uint32_t iocsr_scan_chain1_table[
+	((CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH / 32) + 1)];
+extern const uint32_t iocsr_scan_chain2_table[
+	((CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH / 32) + 1)];
+extern const uint32_t iocsr_scan_chain3_table[
+	((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH / 32) + 1)];
+
+#endif /* _SCAN_MANAGER_H_ */
diff --git a/arch/arm/include/asm/arch-socfpga/socfpga_base_addrs.h b/arch/arm/include/asm/arch-socfpga/socfpga_base_addrs.h
index 50c4ebd..8d329cf 100644
--- a/arch/arm/include/asm/arch-socfpga/socfpga_base_addrs.h
+++ b/arch/arm/include/asm/arch-socfpga/socfpga_base_addrs.h
@@ -13,5 +13,6 @@
 #define SOCFPGA_OSC1TIMER0_ADDRESS 0xffd00000
 #define SOCFPGA_RSTMGR_ADDRESS 0xffd05000
 #define SOCFPGA_SYSMGR_ADDRESS 0xffd08000
+#define SOCFPGA_SCANMGR_ADDRESS 0xfff02000
 
 #endif /* _SOCFPGA_BASE_ADDRS_H_ */
diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h
index 608578a..3d553f7 100644
--- a/include/configs/socfpga_cyclone5.h
+++ b/include/configs/socfpga_cyclone5.h
@@ -8,6 +8,7 @@
 
 #include <asm/arch/socfpga_base_addrs.h>
 #include "../../board/altera/socfpga/pinmux_config.h"
+#include "../../board/altera/socfpga/iocsr_config.h"
 
 /*
  * High level configuration
-- 
1.7.9.5




More information about the U-Boot mailing list