[U-Boot] [PATCH v2 1/6] mx6: soc: Staticize set_vddsoc()

Fabio Estevam festevam at gmail.com
Thu Dec 26 17:51:30 CET 2013


From: Fabio Estevam <fabio.estevam at freescale.com>

set_vddsoc() is not used anywhere else, so make it static.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Changes since v1:
- None

 arch/arm/cpu/armv7/mx6/soc.c              | 2 +-
 arch/arm/include/asm/arch-mx6/sys_proto.h | 2 --
 2 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index a390296..6cbade7 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -101,7 +101,7 @@ void init_aips(void)
  * Possible values are from 0.725V to 1.450V in steps of
  * 0.025V (25mV).
  */
-void set_vddsoc(u32 mv)
+static void set_vddsoc(u32 mv)
 {
 	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
 	u32 val, reg = readl(&anatop->reg_core);
diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h
index 8c21364..17125a6 100644
--- a/arch/arm/include/asm/arch-mx6/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx6/sys_proto.h
@@ -29,8 +29,6 @@ u32 get_cpu_rev(void);
 const char *get_imx_type(u32 imxtype);
 unsigned imx_ddr_size(void);
 
-void set_vddsoc(u32 mv);
-
 /*
  * Initializes on-chip ethernet controllers.
  * to override, implement board_eth_init()
-- 
1.8.1.2



More information about the U-Boot mailing list