[U-Boot] [PATCH v2 20/35] Kbuild: import more build scripts from Linux v3.12 tag

Masahiro Yamada yamada.m at jp.panasonic.com
Wed Dec 18 07:17:38 CET 2013


This commit imports build scripts from Linux Kernel v3.12
as they are.

I know they include some trailing spaces
but I keep intentionally them untouched.

Signed-off-by: Masahiro Yamada <yamada.m at jp.panasonic.com>
---

Changes in v2: None

 scripts/Makefile.build   | 479 +++++++++++++++++++++++++++++++++++++++++++++++
 scripts/Makefile.clean   | 104 ++++++++++
 scripts/Makefile.host    | 170 +++++++++++++++++
 scripts/Makefile.lib     | 373 ++++++++++++++++++++++++++++++++++++
 scripts/basic/.gitignore |   1 +
 scripts/basic/Makefile   |  15 ++
 scripts/basic/fixdep.c   | 462 +++++++++++++++++++++++++++++++++++++++++++++
 scripts/mkmakefile       |  59 ++++++
 8 files changed, 1663 insertions(+)
 create mode 100644 scripts/Makefile.build
 create mode 100644 scripts/Makefile.clean
 create mode 100644 scripts/Makefile.host
 create mode 100644 scripts/Makefile.lib
 create mode 100644 scripts/basic/.gitignore
 create mode 100644 scripts/basic/Makefile
 create mode 100644 scripts/basic/fixdep.c
 create mode 100644 scripts/mkmakefile

diff --git a/scripts/Makefile.build b/scripts/Makefile.build
new file mode 100644
index 0000000..d5d859c
--- /dev/null
+++ b/scripts/Makefile.build
@@ -0,0 +1,479 @@
+# ==========================================================================
+# Building
+# ==========================================================================
+
+src := $(obj)
+
+PHONY := __build
+__build:
+
+# Init all relevant variables used in kbuild files so
+# 1) they have correct type
+# 2) they do not inherit any value from the environment
+obj-y :=
+obj-m :=
+lib-y :=
+lib-m :=
+always :=
+targets :=
+subdir-y :=
+subdir-m :=
+EXTRA_AFLAGS   :=
+EXTRA_CFLAGS   :=
+EXTRA_CPPFLAGS :=
+EXTRA_LDFLAGS  :=
+asflags-y  :=
+ccflags-y  :=
+cppflags-y :=
+ldflags-y  :=
+
+subdir-asflags-y :=
+subdir-ccflags-y :=
+
+# Read auto.conf if it exists, otherwise ignore
+-include include/config/auto.conf
+
+include scripts/Kbuild.include
+
+# For backward compatibility check that these variables do not change
+save-cflags := $(CFLAGS)
+
+# The filename Kbuild has precedence over Makefile
+kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
+kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
+include $(kbuild-file)
+
+# If the save-* variables changed error out
+ifeq ($(KBUILD_NOPEDANTIC),)
+        ifneq ("$(save-cflags)","$(CFLAGS)")
+                $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use ccflags-y)
+        endif
+endif
+
+#
+# make W=... settings
+#
+# W=1 - warnings that may be relevant and does not occur too often
+# W=2 - warnings that occur quite often but may still be relevant
+# W=3 - the more obscure warnings, can most likely be ignored
+#
+# $(call cc-option, -W...) handles gcc -W.. options which
+# are not supported by all versions of the compiler
+ifdef KBUILD_ENABLE_EXTRA_GCC_CHECKS
+warning-  := $(empty)
+
+warning-1 := -Wextra -Wunused -Wno-unused-parameter
+warning-1 += -Wmissing-declarations
+warning-1 += -Wmissing-format-attribute
+warning-1 += -Wmissing-prototypes
+warning-1 += -Wold-style-definition
+warning-1 += $(call cc-option, -Wmissing-include-dirs)
+warning-1 += $(call cc-option, -Wunused-but-set-variable)
+warning-1 += $(call cc-disable-warning, missing-field-initializers)
+
+warning-2 := -Waggregate-return
+warning-2 += -Wcast-align
+warning-2 += -Wdisabled-optimization
+warning-2 += -Wnested-externs
+warning-2 += -Wshadow
+warning-2 += $(call cc-option, -Wlogical-op)
+warning-2 += $(call cc-option, -Wmissing-field-initializers)
+
+warning-3 := -Wbad-function-cast
+warning-3 += -Wcast-qual
+warning-3 += -Wconversion
+warning-3 += -Wpacked
+warning-3 += -Wpadded
+warning-3 += -Wpointer-arith
+warning-3 += -Wredundant-decls
+warning-3 += -Wswitch-default
+warning-3 += $(call cc-option, -Wpacked-bitfield-compat)
+warning-3 += $(call cc-option, -Wvla)
+
+warning := $(warning-$(findstring 1, $(KBUILD_ENABLE_EXTRA_GCC_CHECKS)))
+warning += $(warning-$(findstring 2, $(KBUILD_ENABLE_EXTRA_GCC_CHECKS)))
+warning += $(warning-$(findstring 3, $(KBUILD_ENABLE_EXTRA_GCC_CHECKS)))
+
+ifeq ("$(strip $(warning))","")
+        $(error W=$(KBUILD_ENABLE_EXTRA_GCC_CHECKS) is unknown)
+endif
+
+KBUILD_CFLAGS += $(warning)
+endif
+
+include scripts/Makefile.lib
+
+ifdef host-progs
+ifneq ($(hostprogs-y),$(host-progs))
+$(warning kbuild: $(obj)/Makefile - Usage of host-progs is deprecated. Please replace with hostprogs-y!)
+hostprogs-y += $(host-progs)
+endif
+endif
+
+# Do not include host rules unless needed
+ifneq ($(hostprogs-y)$(hostprogs-m),)
+include scripts/Makefile.host
+endif
+
+ifneq ($(KBUILD_SRC),)
+# Create output directory if not already present
+_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
+
+# Create directories for object files if directory does not exist
+# Needed when obj-y := dir/file.o syntax is used
+_dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d)))
+endif
+
+ifndef obj
+$(warning kbuild: Makefile.build is included improperly)
+endif
+
+# ===========================================================================
+
+ifneq ($(strip $(lib-y) $(lib-m) $(lib-n) $(lib-)),)
+lib-target := $(obj)/lib.a
+endif
+
+ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(subdir-m) $(lib-target)),)
+builtin-target := $(obj)/built-in.o
+endif
+
+modorder-target := $(obj)/modules.order
+
+# We keep a list of all modules in $(MODVERDIR)
+
+__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
+	 $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
+	 $(subdir-ym) $(always)
+	@:
+
+# Linus' kernel sanity checking tool
+ifneq ($(KBUILD_CHECKSRC),0)
+  ifeq ($(KBUILD_CHECKSRC),2)
+    quiet_cmd_force_checksrc = CHECK   $<
+          cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
+  else
+      quiet_cmd_checksrc     = CHECK   $<
+            cmd_checksrc     = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
+  endif
+endif
+
+# Do section mismatch analysis for each module/built-in.o
+ifdef CONFIG_DEBUG_SECTION_MISMATCH
+  cmd_secanalysis = ; scripts/mod/modpost $@
+endif
+
+# Compile C sources (.c)
+# ---------------------------------------------------------------------------
+
+# Default is built-in, unless we know otherwise
+modkern_cflags =                                          \
+	$(if $(part-of-module),                           \
+		$(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \
+		$(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL))
+quiet_modtag := $(empty)   $(empty)
+
+$(real-objs-m)        : part-of-module := y
+$(real-objs-m:.o=.i)  : part-of-module := y
+$(real-objs-m:.o=.s)  : part-of-module := y
+$(real-objs-m:.o=.lst): part-of-module := y
+
+$(real-objs-m)        : quiet_modtag := [M]
+$(real-objs-m:.o=.i)  : quiet_modtag := [M]
+$(real-objs-m:.o=.s)  : quiet_modtag := [M]
+$(real-objs-m:.o=.lst): quiet_modtag := [M]
+
+$(obj-m)              : quiet_modtag := [M]
+
+# Default for not multi-part modules
+modname = $(basetarget)
+
+$(multi-objs-m)         : modname = $(modname-multi)
+$(multi-objs-m:.o=.i)   : modname = $(modname-multi)
+$(multi-objs-m:.o=.s)   : modname = $(modname-multi)
+$(multi-objs-m:.o=.lst) : modname = $(modname-multi)
+$(multi-objs-y)         : modname = $(modname-multi)
+$(multi-objs-y:.o=.i)   : modname = $(modname-multi)
+$(multi-objs-y:.o=.s)   : modname = $(modname-multi)
+$(multi-objs-y:.o=.lst) : modname = $(modname-multi)
+
+quiet_cmd_cc_s_c = CC $(quiet_modtag)  $@
+cmd_cc_s_c       = $(CC) $(c_flags) -fverbose-asm -S -o $@ $<
+
+$(obj)/%.s: $(src)/%.c FORCE
+	$(call if_changed_dep,cc_s_c)
+
+quiet_cmd_cc_i_c = CPP $(quiet_modtag) $@
+cmd_cc_i_c       = $(CPP) $(c_flags)   -o $@ $<
+
+$(obj)/%.i: $(src)/%.c FORCE
+	$(call if_changed_dep,cc_i_c)
+
+cmd_gensymtypes =                                                           \
+    $(CPP) -D__GENKSYMS__ $(c_flags) $< |                                   \
+    $(GENKSYMS) $(if $(1), -T $(2))                                         \
+     $(patsubst y,-s _,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX))             \
+     $(if $(KBUILD_PRESERVE),-p)                                            \
+     -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null))
+
+quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
+cmd_cc_symtypes_c =                                                         \
+    set -e;                                                                 \
+    $(call cmd_gensymtypes,true,$@) >/dev/null;                             \
+    test -s $@ || rm -f $@
+
+$(obj)/%.symtypes : $(src)/%.c FORCE
+	$(call cmd,cc_symtypes_c)
+
+# C (.c) files
+# The C file is compiled and updated dependency information is generated.
+# (See cmd_cc_o_c + relevant part of rule_cc_o_c)
+
+quiet_cmd_cc_o_c = CC $(quiet_modtag)  $@
+
+ifndef CONFIG_MODVERSIONS
+cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
+
+else
+# When module versioning is enabled the following steps are executed:
+# o compile a .tmp_<file>.o from <file>.c
+# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does
+#   not export symbols, we just rename .tmp_<file>.o to <file>.o and
+#   are done.
+# o otherwise, we calculate symbol versions using the good old
+#   genksyms on the preprocessed source and postprocess them in a way
+#   that they are usable as a linker script
+# o generate <file>.o from .tmp_<file>.o using the linker to
+#   replace the unresolved symbols __crc_exported_symbol with
+#   the actual value of the checksum generated by genksyms
+
+cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
+cmd_modversions =								\
+	if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then		\
+		$(call cmd_gensymtypes,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))	\
+		    > $(@D)/.tmp_$(@F:.o=.ver);					\
+										\
+		$(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) 			\
+			-T $(@D)/.tmp_$(@F:.o=.ver);				\
+		rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver);		\
+	else									\
+		mv -f $(@D)/.tmp_$(@F) $@;					\
+	fi;
+endif
+
+ifdef CONFIG_FTRACE_MCOUNT_RECORD
+ifdef BUILD_C_RECORDMCOUNT
+ifeq ("$(origin RECORDMCOUNT_WARN)", "command line")
+  RECORDMCOUNT_FLAGS = -w
+endif
+# Due to recursion, we must skip empty.o.
+# The empty.o file is created in the make process in order to determine
+#  the target endianness and word size. It is made before all other C
+#  files, including recordmcount.
+sub_cmd_record_mcount =					\
+	if [ $(@) != "scripts/mod/empty.o" ]; then	\
+		$(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)";	\
+	fi;
+recordmcount_source := $(srctree)/scripts/recordmcount.c \
+		    $(srctree)/scripts/recordmcount.h
+else
+sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
+	"$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
+	"$(if $(CONFIG_64BIT),64,32)" \
+	"$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CFLAGS)" \
+	"$(LD)" "$(NM)" "$(RM)" "$(MV)" \
+	"$(if $(part-of-module),1,0)" "$(@)";
+recordmcount_source := $(srctree)/scripts/recordmcount.pl
+endif
+cmd_record_mcount = 						\
+	if [ "$(findstring -pg,$(_c_flags))" = "-pg" ]; then	\
+		$(sub_cmd_record_mcount)			\
+	fi;
+endif
+
+define rule_cc_o_c
+	$(call echo-cmd,checksrc) $(cmd_checksrc)			  \
+	$(call echo-cmd,cc_o_c) $(cmd_cc_o_c);				  \
+	$(cmd_modversions)						  \
+	$(call echo-cmd,record_mcount)					  \
+	$(cmd_record_mcount)						  \
+	scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' >    \
+	                                              $(dot-target).tmp;  \
+	rm -f $(depfile);						  \
+	mv -f $(dot-target).tmp $(dot-target).cmd
+endef
+
+# Built-in and composite module parts
+$(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE
+	$(call cmd,force_checksrc)
+	$(call if_changed_rule,cc_o_c)
+
+# Single-part modules are special since we need to mark them in $(MODVERDIR)
+
+$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE
+	$(call cmd,force_checksrc)
+	$(call if_changed_rule,cc_o_c)
+	@{ echo $(@:.o=.ko); echo $@; } > $(MODVERDIR)/$(@F:.o=.mod)
+
+quiet_cmd_cc_lst_c = MKLST   $@
+      cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
+		     $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \
+				     System.map $(OBJDUMP) > $@
+
+$(obj)/%.lst: $(src)/%.c FORCE
+	$(call if_changed_dep,cc_lst_c)
+
+# Compile assembler sources (.S)
+# ---------------------------------------------------------------------------
+
+modkern_aflags := $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL)
+
+$(real-objs-m)      : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
+$(real-objs-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
+
+quiet_cmd_as_s_S = CPP $(quiet_modtag) $@
+cmd_as_s_S       = $(CPP) $(a_flags)   -o $@ $< 
+
+$(obj)/%.s: $(src)/%.S FORCE
+	$(call if_changed_dep,as_s_S)
+
+quiet_cmd_as_o_S = AS $(quiet_modtag)  $@
+cmd_as_o_S       = $(CC) $(a_flags) -c -o $@ $<
+
+$(obj)/%.o: $(src)/%.S FORCE
+	$(call if_changed_dep,as_o_S)
+
+targets += $(real-objs-y) $(real-objs-m) $(lib-y)
+targets += $(extra-y) $(MAKECMDGOALS) $(always)
+
+# Linker scripts preprocessor (.lds.S -> .lds)
+# ---------------------------------------------------------------------------
+quiet_cmd_cpp_lds_S = LDS     $@
+      cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \
+	                     -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
+
+$(obj)/%.lds: $(src)/%.lds.S FORCE
+	$(call if_changed_dep,cpp_lds_S)
+
+# ASN.1 grammar
+# ---------------------------------------------------------------------------
+quiet_cmd_asn1_compiler = ASN.1   $@
+      cmd_asn1_compiler = $(objtree)/scripts/asn1_compiler $< \
+				$(subst .h,.c,$@) $(subst .c,.h,$@)
+
+.PRECIOUS: $(objtree)/$(obj)/%-asn1.c $(objtree)/$(obj)/%-asn1.h
+
+$(obj)/%-asn1.c $(obj)/%-asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler
+	$(call cmd,asn1_compiler)
+
+# Build the compiled-in targets
+# ---------------------------------------------------------------------------
+
+# To build objects in subdirs, we need to descend into the directories
+$(sort $(subdir-obj-y)): $(subdir-ym) ;
+
+#
+# Rule to compile a set of .o files into one .o file
+#
+ifdef builtin-target
+quiet_cmd_link_o_target = LD      $@
+# If the list of objects to link is empty, just create an empty built-in.o
+cmd_link_o_target = $(if $(strip $(obj-y)),\
+		      $(LD) $(ld_flags) -r -o $@ $(filter $(obj-y), $^) \
+		      $(cmd_secanalysis),\
+		      rm -f $@; $(AR) rcs$(KBUILD_ARFLAGS) $@)
+
+$(builtin-target): $(obj-y) FORCE
+	$(call if_changed,link_o_target)
+
+targets += $(builtin-target)
+endif # builtin-target
+
+#
+# Rule to create modules.order file
+#
+# Create commands to either record .ko file or cat modules.order from
+# a subdirectory
+modorder-cmds =						\
+	$(foreach m, $(modorder),			\
+		$(if $(filter %/modules.order, $m),	\
+			cat $m;, echo kernel/$m;))
+
+$(modorder-target): $(subdir-ym) FORCE
+	$(Q)(cat /dev/null; $(modorder-cmds)) > $@
+
+#
+# Rule to compile a set of .o files into one .a file
+#
+ifdef lib-target
+quiet_cmd_link_l_target = AR      $@
+cmd_link_l_target = rm -f $@; $(AR) rcs$(KBUILD_ARFLAGS) $@ $(lib-y)
+
+$(lib-target): $(lib-y) FORCE
+	$(call if_changed,link_l_target)
+
+targets += $(lib-target)
+endif
+
+#
+# Rule to link composite objects
+#
+#  Composite objects are specified in kbuild makefile as follows:
+#    <composite-object>-objs := <list of .o files>
+#  or
+#    <composite-object>-y    := <list of .o files>
+link_multi_deps =                     \
+$(filter $(addprefix $(obj)/,         \
+$($(subst $(obj)/,,$(@:.o=-objs)))    \
+$($(subst $(obj)/,,$(@:.o=-y)))), $^)
+ 
+quiet_cmd_link_multi-y = LD      $@
+cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis)
+
+quiet_cmd_link_multi-m = LD [M]  $@
+cmd_link_multi-m = $(cmd_link_multi-y)
+
+# We would rather have a list of rules like
+# 	foo.o: $(foo-objs)
+# but that's not so easy, so we rather make all composite objects depend
+# on the set of all their parts
+$(multi-used-y) : %.o: $(multi-objs-y) FORCE
+	$(call if_changed,link_multi-y)
+
+$(multi-used-m) : %.o: $(multi-objs-m) FORCE
+	$(call if_changed,link_multi-m)
+	@{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod)
+
+targets += $(multi-used-y) $(multi-used-m)
+
+
+# Descending
+# ---------------------------------------------------------------------------
+
+PHONY += $(subdir-ym)
+$(subdir-ym):
+	$(Q)$(MAKE) $(build)=$@
+
+# Add FORCE to the prequisites of a target to force it to be always rebuilt.
+# ---------------------------------------------------------------------------
+
+PHONY += FORCE
+
+FORCE:
+
+# Read all saved command lines and dependencies for the $(targets) we
+# may be building above, using $(if_changed{,_dep}). As an
+# optimization, we don't need to read them if the target does not
+# exist, we will rebuild anyway in that case.
+
+targets := $(wildcard $(sort $(targets)))
+cmd_files := $(wildcard $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
+
+ifneq ($(cmd_files),)
+  include $(cmd_files)
+endif
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
diff --git a/scripts/Makefile.clean b/scripts/Makefile.clean
new file mode 100644
index 0000000..686cb0d
--- /dev/null
+++ b/scripts/Makefile.clean
@@ -0,0 +1,104 @@
+# ==========================================================================
+# Cleaning up
+# ==========================================================================
+
+src := $(obj)
+
+PHONY := __clean
+__clean:
+
+# Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
+# Usage:
+# $(Q)$(MAKE) $(clean)=dir
+clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+
+# The filename Kbuild has precedence over Makefile
+kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
+include $(if $(wildcard $(kbuild-dir)/Kbuild), $(kbuild-dir)/Kbuild, $(kbuild-dir)/Makefile)
+
+# Figure out what we need to build from the various variables
+# ==========================================================================
+
+__subdir-y	:= $(patsubst %/,%,$(filter %/, $(obj-y)))
+subdir-y	+= $(__subdir-y)
+__subdir-m	:= $(patsubst %/,%,$(filter %/, $(obj-m)))
+subdir-m	+= $(__subdir-m)
+__subdir-n	:= $(patsubst %/,%,$(filter %/, $(obj-n)))
+subdir-n	+= $(__subdir-n)
+__subdir-	:= $(patsubst %/,%,$(filter %/, $(obj-)))
+subdir-		+= $(__subdir-)
+
+# Subdirectories we need to descend into
+
+subdir-ym	:= $(sort $(subdir-y) $(subdir-m))
+subdir-ymn      := $(sort $(subdir-ym) $(subdir-n) $(subdir-))
+
+# Add subdir path
+
+subdir-ymn	:= $(addprefix $(obj)/,$(subdir-ymn))
+
+# build a list of files to remove, usually relative to the current
+# directory
+
+__clean-files	:= $(extra-y) $(always)                  \
+		   $(targets) $(clean-files)             \
+		   $(host-progs)                         \
+		   $(hostprogs-y) $(hostprogs-m) $(hostprogs-)
+
+__clean-files   := $(filter-out $(no-clean-files), $(__clean-files))
+
+# as clean-files is given relative to the current directory, this adds
+# a $(obj) prefix, except for absolute paths
+
+__clean-files   := $(wildcard                                               \
+                   $(addprefix $(obj)/, $(filter-out /%, $(__clean-files))) \
+		   $(filter /%, $(__clean-files)))
+
+# as clean-dirs is given relative to the current directory, this adds
+# a $(obj) prefix, except for absolute paths
+
+__clean-dirs    := $(wildcard                                               \
+                   $(addprefix $(obj)/, $(filter-out /%, $(clean-dirs)))    \
+		   $(filter /%, $(clean-dirs)))
+
+# ==========================================================================
+
+quiet_cmd_clean    = CLEAN   $(obj)
+      cmd_clean    = rm -f $(__clean-files)
+quiet_cmd_cleandir = CLEAN   $(__clean-dirs)
+      cmd_cleandir = rm -rf $(__clean-dirs)
+
+
+__clean: $(subdir-ymn)
+ifneq ($(strip $(__clean-files)),)
+	+$(call cmd,clean)
+endif
+ifneq ($(strip $(__clean-dirs)),)
+	+$(call cmd,cleandir)
+endif
+ifneq ($(strip $(clean-rule)),)
+	+$(clean-rule)
+endif
+	@:
+
+
+# ===========================================================================
+# Generic stuff
+# ===========================================================================
+
+# Descending
+# ---------------------------------------------------------------------------
+
+PHONY += $(subdir-ymn)
+$(subdir-ymn):
+	$(Q)$(MAKE) $(clean)=$@
+
+# If quiet is set, only print short version of command
+
+cmd = @$(if $($(quiet)cmd_$(1)),echo '  $($(quiet)cmd_$(1))' &&) $(cmd_$(1))
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
diff --git a/scripts/Makefile.host b/scripts/Makefile.host
new file mode 100644
index 0000000..1ac414f
--- /dev/null
+++ b/scripts/Makefile.host
@@ -0,0 +1,170 @@
+# ==========================================================================
+# Building binaries on the host system
+# Binaries are used during the compilation of the kernel, for example
+# to preprocess a data file.
+#
+# Both C and C++ are supported, but preferred language is C for such utilities.
+#
+# Sample syntax (see Documentation/kbuild/makefiles.txt for reference)
+# hostprogs-y := bin2hex
+# Will compile bin2hex.c and create an executable named bin2hex
+#
+# hostprogs-y    := lxdialog
+# lxdialog-objs := checklist.o lxdialog.o
+# Will compile lxdialog.c and checklist.c, and then link the executable
+# lxdialog, based on checklist.o and lxdialog.o
+#
+# hostprogs-y      := qconf
+# qconf-cxxobjs   := qconf.o
+# qconf-objs      := menu.o
+# Will compile qconf as a C++ program, and menu as a C program.
+# They are linked as C++ code to the executable qconf
+
+# hostprogs-y := conf
+# conf-objs  := conf.o libkconfig.so
+# libkconfig-objs := expr.o type.o
+# Will create a shared library named libkconfig.so that consists of
+# expr.o and type.o (they are both compiled as C code and the object files
+# are made as position independent code).
+# conf.c is compiled as a C program, and conf.o is linked together with
+# libkconfig.so as the executable conf.
+# Note: Shared libraries consisting of C++ files are not supported
+
+__hostprogs := $(sort $(hostprogs-y) $(hostprogs-m))
+
+# C code
+# Executables compiled from a single .c file
+host-csingle	:= $(foreach m,$(__hostprogs),$(if $($(m)-objs),,$(m)))
+
+# C executables linked based on several .o files
+host-cmulti	:= $(foreach m,$(__hostprogs),\
+		   $(if $($(m)-cxxobjs),,$(if $($(m)-objs),$(m))))
+
+# Object (.o) files compiled from .c files
+host-cobjs	:= $(sort $(foreach m,$(__hostprogs),$($(m)-objs)))
+
+# C++ code
+# C++ executables compiled from at least on .cc file
+# and zero or more .c files
+host-cxxmulti	:= $(foreach m,$(__hostprogs),$(if $($(m)-cxxobjs),$(m)))
+
+# C++ Object (.o) files compiled from .cc files
+host-cxxobjs	:= $(sort $(foreach m,$(host-cxxmulti),$($(m)-cxxobjs)))
+
+# Shared libaries (only .c supported)
+# Shared libraries (.so) - all .so files referenced in "xxx-objs"
+host-cshlib	:= $(sort $(filter %.so, $(host-cobjs)))
+# Remove .so files from "xxx-objs"
+host-cobjs	:= $(filter-out %.so,$(host-cobjs))
+
+#Object (.o) files used by the shared libaries
+host-cshobjs	:= $(sort $(foreach m,$(host-cshlib),$($(m:.so=-objs))))
+
+# output directory for programs/.o files
+# hostprogs-y := tools/build may have been specified. Retrieve directory
+host-objdirs := $(foreach f,$(__hostprogs), $(if $(dir $(f)),$(dir $(f))))
+# directory of .o files from prog-objs notation
+host-objdirs += $(foreach f,$(host-cmulti),                  \
+                    $(foreach m,$($(f)-objs),                \
+                        $(if $(dir $(m)),$(dir $(m)))))
+# directory of .o files from prog-cxxobjs notation
+host-objdirs += $(foreach f,$(host-cxxmulti),                  \
+                    $(foreach m,$($(f)-cxxobjs),                \
+                        $(if $(dir $(m)),$(dir $(m)))))
+
+host-objdirs := $(strip $(sort $(filter-out ./,$(host-objdirs))))
+
+
+__hostprogs     := $(addprefix $(obj)/,$(__hostprogs))
+host-csingle	:= $(addprefix $(obj)/,$(host-csingle))
+host-cmulti	:= $(addprefix $(obj)/,$(host-cmulti))
+host-cobjs	:= $(addprefix $(obj)/,$(host-cobjs))
+host-cxxmulti	:= $(addprefix $(obj)/,$(host-cxxmulti))
+host-cxxobjs	:= $(addprefix $(obj)/,$(host-cxxobjs))
+host-cshlib	:= $(addprefix $(obj)/,$(host-cshlib))
+host-cshobjs	:= $(addprefix $(obj)/,$(host-cshobjs))
+host-objdirs    := $(addprefix $(obj)/,$(host-objdirs))
+
+obj-dirs += $(host-objdirs)
+
+#####
+# Handle options to gcc. Support building with separate output directory
+
+_hostc_flags   = $(HOSTCFLAGS)   $(HOST_EXTRACFLAGS)   \
+                 $(HOSTCFLAGS_$(basetarget).o)
+_hostcxx_flags = $(HOSTCXXFLAGS) $(HOST_EXTRACXXFLAGS) \
+                 $(HOSTCXXFLAGS_$(basetarget).o)
+
+ifeq ($(KBUILD_SRC),)
+__hostc_flags	= $(_hostc_flags)
+__hostcxx_flags	= $(_hostcxx_flags)
+else
+__hostc_flags	= -I$(obj) $(call flags,_hostc_flags)
+__hostcxx_flags	= -I$(obj) $(call flags,_hostcxx_flags)
+endif
+
+hostc_flags    = -Wp,-MD,$(depfile) $(__hostc_flags)
+hostcxx_flags  = -Wp,-MD,$(depfile) $(__hostcxx_flags)
+
+#####
+# Compile programs on the host
+
+# Create executable from a single .c file
+# host-csingle -> Executable
+quiet_cmd_host-csingle 	= HOSTCC  $@
+      cmd_host-csingle	= $(HOSTCC) $(hostc_flags) -o $@ $< \
+	  	$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
+$(host-csingle): $(obj)/%: $(src)/%.c FORCE
+	$(call if_changed_dep,host-csingle)
+
+# Link an executable based on list of .o files, all plain c
+# host-cmulti -> executable
+quiet_cmd_host-cmulti	= HOSTLD  $@
+      cmd_host-cmulti	= $(HOSTCC) $(HOSTLDFLAGS) -o $@ \
+			  $(addprefix $(obj)/,$($(@F)-objs)) \
+			  $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
+$(host-cmulti): $(obj)/%: $(host-cobjs) $(host-cshlib) FORCE
+	$(call if_changed,host-cmulti)
+
+# Create .o file from a single .c file
+# host-cobjs -> .o
+quiet_cmd_host-cobjs	= HOSTCC  $@
+      cmd_host-cobjs	= $(HOSTCC) $(hostc_flags) -c -o $@ $<
+$(host-cobjs): $(obj)/%.o: $(src)/%.c FORCE
+	$(call if_changed_dep,host-cobjs)
+
+# Link an executable based on list of .o files, a mixture of .c and .cc
+# host-cxxmulti -> executable
+quiet_cmd_host-cxxmulti	= HOSTLD  $@
+      cmd_host-cxxmulti	= $(HOSTCXX) $(HOSTLDFLAGS) -o $@ \
+			  $(foreach o,objs cxxobjs,\
+			  $(addprefix $(obj)/,$($(@F)-$(o)))) \
+			  $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
+$(host-cxxmulti): $(obj)/%: $(host-cobjs) $(host-cxxobjs) $(host-cshlib) FORCE
+	$(call if_changed,host-cxxmulti)
+
+# Create .o file from a single .cc (C++) file
+quiet_cmd_host-cxxobjs	= HOSTCXX $@
+      cmd_host-cxxobjs	= $(HOSTCXX) $(hostcxx_flags) -c -o $@ $<
+$(host-cxxobjs): $(obj)/%.o: $(src)/%.cc FORCE
+	$(call if_changed_dep,host-cxxobjs)
+
+# Compile .c file, create position independent .o file
+# host-cshobjs -> .o
+quiet_cmd_host-cshobjs	= HOSTCC  -fPIC $@
+      cmd_host-cshobjs	= $(HOSTCC) $(hostc_flags) -fPIC -c -o $@ $<
+$(host-cshobjs): $(obj)/%.o: $(src)/%.c FORCE
+	$(call if_changed_dep,host-cshobjs)
+
+# Link a shared library, based on position independent .o files
+# *.o -> .so shared library (host-cshlib)
+quiet_cmd_host-cshlib	= HOSTLLD -shared $@
+      cmd_host-cshlib	= $(HOSTCC) $(HOSTLDFLAGS) -shared -o $@ \
+			  $(addprefix $(obj)/,$($(@F:.so=-objs))) \
+			  $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
+$(host-cshlib): $(obj)/%: $(host-cshobjs) FORCE
+	$(call if_changed,host-cshlib)
+
+targets += $(host-csingle)  $(host-cmulti) $(host-cobjs)\
+	   $(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs) 
+
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
new file mode 100644
index 0000000..49392ec
--- /dev/null
+++ b/scripts/Makefile.lib
@@ -0,0 +1,373 @@
+# Backward compatibility
+asflags-y  += $(EXTRA_AFLAGS)
+ccflags-y  += $(EXTRA_CFLAGS)
+cppflags-y += $(EXTRA_CPPFLAGS)
+ldflags-y  += $(EXTRA_LDFLAGS)
+
+#
+# flags that take effect in sub directories
+export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y)
+export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y)
+
+# Figure out what we need to build from the various variables
+# ===========================================================================
+
+# When an object is listed to be built compiled-in and modular,
+# only build the compiled-in version
+
+obj-m := $(filter-out $(obj-y),$(obj-m))
+
+# Libraries are always collected in one lib file.
+# Filter out objects already built-in
+
+lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))
+
+
+# Handle objects in subdirs
+# ---------------------------------------------------------------------------
+# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o
+#   and add the directory to the list of dirs to descend into: $(subdir-y)
+# o if we encounter foo/ in $(obj-m), remove it from $(obj-m) 
+#   and add the directory to the list of dirs to descend into: $(subdir-m)
+
+# Determine modorder.
+# Unfortunately, we don't have information about ordering between -y
+# and -m subdirs.  Just put -y's first.
+modorder	:= $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko))
+
+__subdir-y	:= $(patsubst %/,%,$(filter %/, $(obj-y)))
+subdir-y	+= $(__subdir-y)
+__subdir-m	:= $(patsubst %/,%,$(filter %/, $(obj-m)))
+subdir-m	+= $(__subdir-m)
+obj-y		:= $(patsubst %/, %/built-in.o, $(obj-y))
+obj-m		:= $(filter-out %/, $(obj-m))
+
+# Subdirectories we need to descend into
+
+subdir-ym	:= $(sort $(subdir-y) $(subdir-m))
+
+# if $(foo-objs) exists, foo.o is a composite object 
+multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
+multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
+multi-used   := $(multi-used-y) $(multi-used-m)
+single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))
+
+# Build list of the parts of our composite objects, our composite
+# objects depend on those (obviously)
+multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y)))
+multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y)))
+multi-objs   := $(multi-objs-y) $(multi-objs-m)
+
+# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
+# tell kbuild to descend
+subdir-obj-y := $(filter %/built-in.o, $(obj-y))
+
+# $(obj-dirs) is a list of directories that contain object files
+obj-dirs := $(dir $(multi-objs) $(obj-y))
+
+# Replace multi-part objects by their individual parts, look at local dir only
+real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
+real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
+
+# Add subdir path
+
+extra-y		:= $(addprefix $(obj)/,$(extra-y))
+always		:= $(addprefix $(obj)/,$(always))
+targets		:= $(addprefix $(obj)/,$(targets))
+modorder	:= $(addprefix $(obj)/,$(modorder))
+obj-y		:= $(addprefix $(obj)/,$(obj-y))
+obj-m		:= $(addprefix $(obj)/,$(obj-m))
+lib-y		:= $(addprefix $(obj)/,$(lib-y))
+subdir-obj-y	:= $(addprefix $(obj)/,$(subdir-obj-y))
+real-objs-y	:= $(addprefix $(obj)/,$(real-objs-y))
+real-objs-m	:= $(addprefix $(obj)/,$(real-objs-m))
+single-used-m	:= $(addprefix $(obj)/,$(single-used-m))
+multi-used-y	:= $(addprefix $(obj)/,$(multi-used-y))
+multi-used-m	:= $(addprefix $(obj)/,$(multi-used-m))
+multi-objs-y	:= $(addprefix $(obj)/,$(multi-objs-y))
+multi-objs-m	:= $(addprefix $(obj)/,$(multi-objs-m))
+subdir-ym	:= $(addprefix $(obj)/,$(subdir-ym))
+obj-dirs	:= $(addprefix $(obj)/,$(obj-dirs))
+
+# These flags are needed for modversions and compiling, so we define them here
+# already
+# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will 
+# end up in (or would, if it gets compiled in)
+# Note: Files that end up in two or more modules are compiled without the
+#       KBUILD_MODNAME definition. The reason is that any made-up name would
+#       differ in different configs.
+name-fix = $(subst $(comma),_,$(subst -,_,$1))
+basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))"
+modname_flags  = $(if $(filter 1,$(words $(modname))),\
+                 -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))")
+
+orig_c_flags   = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
+                 $(ccflags-y) $(CFLAGS_$(basetarget).o)
+_c_flags       = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
+_a_flags       = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \
+                 $(asflags-y) $(AFLAGS_$(basetarget).o)
+_cpp_flags     = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
+
+#
+# Enable gcov profiling flags for a file, directory or for all files depending
+# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
+# (in this order)
+#
+ifeq ($(CONFIG_GCOV_KERNEL),y)
+_c_flags += $(if $(patsubst n%,, \
+		$(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
+		$(CFLAGS_GCOV))
+endif
+
+# If building the kernel in a separate objtree expand all occurrences
+# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').
+
+ifeq ($(KBUILD_SRC),)
+__c_flags	= $(_c_flags)
+__a_flags	= $(_a_flags)
+__cpp_flags     = $(_cpp_flags)
+else
+
+# -I$(obj) locates generated .h files
+# $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files
+#   and locates generated .h files
+# FIXME: Replace both with specific CFLAGS* statements in the makefiles
+__c_flags	= $(call addtree,-I$(obj)) $(call flags,_c_flags)
+__a_flags	=                          $(call flags,_a_flags)
+__cpp_flags     =                          $(call flags,_cpp_flags)
+endif
+
+c_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
+		 $(__c_flags) $(modkern_cflags)                           \
+		 -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags)
+
+a_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
+		 $(__a_flags) $(modkern_aflags)
+
+cpp_flags      = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
+		 $(__cpp_flags)
+
+ld_flags       = $(LDFLAGS) $(ldflags-y)
+
+dtc_cpp_flags  = -Wp,-MD,$(depfile).pre.tmp -nostdinc                    \
+		 -I$(srctree)/arch/$(SRCARCH)/boot/dts                   \
+		 -I$(srctree)/arch/$(SRCARCH)/boot/dts/include           \
+		 -undef -D__DTS__
+
+# Finds the multi-part object the current object will be linked into
+modname-multi = $(sort $(foreach m,$(multi-used),\
+		$(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=))))
+
+ifdef REGENERATE_PARSERS
+
+# GPERF
+# ---------------------------------------------------------------------------
+quiet_cmd_gperf = GPERF $@
+      cmd_gperf = gperf -t --output-file $@ -a -C -E -g -k 1,3,$$ -p -t $<
+
+.PRECIOUS: $(src)/%.hash.c_shipped
+$(src)/%.hash.c_shipped: $(src)/%.gperf
+	$(call cmd,gperf)
+
+# LEX
+# ---------------------------------------------------------------------------
+LEX_PREFIX = $(if $(LEX_PREFIX_${baseprereq}),$(LEX_PREFIX_${baseprereq}),yy)
+
+quiet_cmd_flex = LEX     $@
+      cmd_flex = flex -o$@ -L -P $(LEX_PREFIX) $<
+
+.PRECIOUS: $(src)/%.lex.c_shipped
+$(src)/%.lex.c_shipped: $(src)/%.l
+	$(call cmd,flex)
+
+# YACC
+# ---------------------------------------------------------------------------
+YACC_PREFIX = $(if $(YACC_PREFIX_${baseprereq}),$(YACC_PREFIX_${baseprereq}),yy)
+
+quiet_cmd_bison = YACC    $@
+      cmd_bison = bison -o$@ -t -l -p $(YACC_PREFIX) $<
+
+.PRECIOUS: $(src)/%.tab.c_shipped
+$(src)/%.tab.c_shipped: $(src)/%.y
+	$(call cmd,bison)
+
+quiet_cmd_bison_h = YACC    $@
+      cmd_bison_h = bison -o/dev/null --defines=$@ -t -l -p $(YACC_PREFIX) $<
+
+.PRECIOUS: $(src)/%.tab.h_shipped
+$(src)/%.tab.h_shipped: $(src)/%.y
+	$(call cmd,bison_h)
+
+endif
+
+# Shipped files
+# ===========================================================================
+
+quiet_cmd_shipped = SHIPPED $@
+cmd_shipped = cat $< > $@
+
+$(obj)/%: $(src)/%_shipped
+	$(call cmd,shipped)
+
+# Commands useful for building a boot image
+# ===========================================================================
+# 
+#	Use as following:
+#
+#	target: source(s) FORCE
+#		$(if_changed,ld/objcopy/gzip)
+#
+#	and add target to extra-y so that we know we have to
+#	read in the saved command line
+
+# Linking
+# ---------------------------------------------------------------------------
+
+quiet_cmd_ld = LD      $@
+cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \
+	       $(filter-out FORCE,$^) -o $@ 
+
+# Objcopy
+# ---------------------------------------------------------------------------
+
+quiet_cmd_objcopy = OBJCOPY $@
+cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
+
+# Gzip
+# ---------------------------------------------------------------------------
+
+quiet_cmd_gzip = GZIP    $@
+cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@) || \
+	(rm -f $@ ; false)
+
+# DTC
+# ---------------------------------------------------------------------------
+
+# Generate an assembly file to wrap the output of the device tree compiler
+quiet_cmd_dt_S_dtb= DTB     $@
+cmd_dt_S_dtb=						\
+(							\
+	echo '\#include <asm-generic/vmlinux.lds.h>'; 	\
+	echo '.section .dtb.init.rodata,"a"';		\
+	echo '.balign STRUCT_ALIGNMENT';		\
+	echo '.global __dtb_$(*F)_begin';		\
+	echo '__dtb_$(*F)_begin:';			\
+	echo '.incbin "$<" ';				\
+	echo '__dtb_$(*F)_end:';			\
+	echo '.global __dtb_$(*F)_end';			\
+	echo '.balign STRUCT_ALIGNMENT'; 		\
+) > $@
+
+$(obj)/%.dtb.S: $(obj)/%.dtb
+	$(call cmd,dt_S_dtb)
+
+quiet_cmd_dtc = DTC     $@
+cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
+	$(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 \
+		-i $(dir $<) $(DTC_FLAGS) \
+		-d $(depfile).dtc.tmp $(dtc-tmp) ; \
+	cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
+
+$(obj)/%.dtb: $(src)/%.dts FORCE
+	$(call if_changed_dep,dtc)
+
+dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
+
+# Bzip2
+# ---------------------------------------------------------------------------
+
+# Bzip2 and LZMA do not include size in file... so we have to fake that;
+# append the size as a 32-bit littleendian number as gzip does.
+size_append = printf $(shell						\
+dec_size=0;								\
+for F in $1; do								\
+	fsize=$$(stat -c "%s" $$F);					\
+	dec_size=$$(expr $$dec_size + $$fsize);				\
+done;									\
+printf "%08x\n" $$dec_size |						\
+	sed 's/\(..\)/\1 /g' | {					\
+		read ch0 ch1 ch2 ch3;					\
+		for ch in $$ch3 $$ch2 $$ch1 $$ch0; do			\
+			printf '%s%03o' '\\' $$((0x$$ch)); 		\
+		done;							\
+	}								\
+)
+
+quiet_cmd_bzip2 = BZIP2   $@
+cmd_bzip2 = (cat $(filter-out FORCE,$^) | \
+	bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+	(rm -f $@ ; false)
+
+# Lzma
+# ---------------------------------------------------------------------------
+
+quiet_cmd_lzma = LZMA    $@
+cmd_lzma = (cat $(filter-out FORCE,$^) | \
+	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+	(rm -f $@ ; false)
+
+quiet_cmd_lzo = LZO     $@
+cmd_lzo = (cat $(filter-out FORCE,$^) | \
+	lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+	(rm -f $@ ; false)
+
+quiet_cmd_lz4 = LZ4     $@
+cmd_lz4 = (cat $(filter-out FORCE,$^) | \
+	lz4c -l -c1 stdin stdout && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+	(rm -f $@ ; false)
+
+# U-Boot mkimage
+# ---------------------------------------------------------------------------
+
+MKIMAGE := $(srctree)/scripts/mkuboot.sh
+
+# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces
+# the number of overrides in arch makefiles
+UIMAGE_ARCH ?= $(SRCARCH)
+UIMAGE_COMPRESSION ?= $(if $(2),$(2),none)
+UIMAGE_OPTS-y ?=
+UIMAGE_TYPE ?= kernel
+UIMAGE_LOADADDR ?= arch_must_set_this
+UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR)
+UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)'
+UIMAGE_IN ?= $<
+UIMAGE_OUT ?= $@
+
+quiet_cmd_uimage = UIMAGE  $(UIMAGE_OUT)
+      cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \
+			-C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \
+			-T $(UIMAGE_TYPE) \
+			-a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \
+			-n $(UIMAGE_NAME) -d $(UIMAGE_IN) $(UIMAGE_OUT)
+
+# XZ
+# ---------------------------------------------------------------------------
+# Use xzkern to compress the kernel image and xzmisc to compress other things.
+#
+# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage
+# of the kernel decompressor. A BCJ filter is used if it is available for
+# the target architecture. xzkern also appends uncompressed size of the data
+# using size_append. The .xz format has the size information available at
+# the end of the file too, but it's in more complex format and it's good to
+# avoid changing the part of the boot code that reads the uncompressed size.
+# Note that the bytes added by size_append will make the xz tool think that
+# the file is corrupt. This is expected.
+#
+# xzmisc doesn't use size_append, so it can be used to create normal .xz
+# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very
+# big dictionary would increase the memory usage too much in the multi-call
+# decompression mode. A BCJ filter isn't used either.
+quiet_cmd_xzkern = XZKERN  $@
+cmd_xzkern = (cat $(filter-out FORCE,$^) | \
+	sh $(srctree)/scripts/xz_wrap.sh && \
+	$(call size_append, $(filter-out FORCE,$^))) > $@ || \
+	(rm -f $@ ; false)
+
+quiet_cmd_xzmisc = XZMISC  $@
+cmd_xzmisc = (cat $(filter-out FORCE,$^) | \
+	xz --check=crc32 --lzma2=dict=1MiB) > $@ || \
+	(rm -f $@ ; false)
+
+# misc stuff
+# ---------------------------------------------------------------------------
+quote:="
diff --git a/scripts/basic/.gitignore b/scripts/basic/.gitignore
new file mode 100644
index 0000000..a776371
--- /dev/null
+++ b/scripts/basic/.gitignore
@@ -0,0 +1 @@
+fixdep
diff --git a/scripts/basic/Makefile b/scripts/basic/Makefile
new file mode 100644
index 0000000..4fcef87
--- /dev/null
+++ b/scripts/basic/Makefile
@@ -0,0 +1,15 @@
+###
+# Makefile.basic lists the most basic programs used during the build process.
+# The programs listed herein are what are needed to do the basic stuff,
+# such as fix file dependencies.
+# This initial step is needed to avoid files to be recompiled
+# when kernel configuration changes (which is what happens when
+# .config is included by main Makefile.
+# ---------------------------------------------------------------------------
+# fixdep: 	 Used to generate dependency information during build process
+
+hostprogs-y	:= fixdep
+always		:= $(hostprogs-y)
+
+# fixdep is needed to compile other host programs
+$(addprefix $(obj)/,$(filter-out fixdep,$(always))): $(obj)/fixdep
diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c
new file mode 100644
index 0000000..078fe1d
--- /dev/null
+++ b/scripts/basic/fixdep.c
@@ -0,0 +1,462 @@
+/*
+ * "Optimize" a list of dependencies as spit out by gcc -MD
+ * for the kernel build
+ * ===========================================================================
+ *
+ * Author       Kai Germaschewski
+ * Copyright    2002 by Kai Germaschewski  <kai.germaschewski at gmx.de>
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ *
+ * Introduction:
+ *
+ * gcc produces a very nice and correct list of dependencies which
+ * tells make when to remake a file.
+ *
+ * To use this list as-is however has the drawback that virtually
+ * every file in the kernel includes autoconf.h.
+ *
+ * If the user re-runs make *config, autoconf.h will be
+ * regenerated.  make notices that and will rebuild every file which
+ * includes autoconf.h, i.e. basically all files. This is extremely
+ * annoying if the user just changed CONFIG_HIS_DRIVER from n to m.
+ *
+ * So we play the same trick that "mkdep" played before. We replace
+ * the dependency on autoconf.h by a dependency on every config
+ * option which is mentioned in any of the listed prequisites.
+ *
+ * kconfig populates a tree in include/config/ with an empty file
+ * for each config symbol and when the configuration is updated
+ * the files representing changed config options are touched
+ * which then let make pick up the changes and the files that use
+ * the config symbols are rebuilt.
+ *
+ * So if the user changes his CONFIG_HIS_DRIVER option, only the objects
+ * which depend on "include/linux/config/his/driver.h" will be rebuilt,
+ * so most likely only his driver ;-)
+ *
+ * The idea above dates, by the way, back to Michael E Chastain, AFAIK.
+ *
+ * So to get dependencies right, there are two issues:
+ * o if any of the files the compiler read changed, we need to rebuild
+ * o if the command line given to the compile the file changed, we
+ *   better rebuild as well.
+ *
+ * The former is handled by using the -MD output, the later by saving
+ * the command line used to compile the old object and comparing it
+ * to the one we would now use.
+ *
+ * Again, also this idea is pretty old and has been discussed on
+ * kbuild-devel a long time ago. I don't have a sensibly working
+ * internet connection right now, so I rather don't mention names
+ * without double checking.
+ *
+ * This code here has been based partially based on mkdep.c, which
+ * says the following about its history:
+ *
+ *   Copyright abandoned, Michael Chastain, <mailto:mec at shout.net>.
+ *   This is a C version of syncdep.pl by Werner Almesberger.
+ *
+ *
+ * It is invoked as
+ *
+ *   fixdep <depfile> <target> <cmdline>
+ *
+ * and will read the dependency file <depfile>
+ *
+ * The transformed dependency snipped is written to stdout.
+ *
+ * It first generates a line
+ *
+ *   cmd_<target> = <cmdline>
+ *
+ * and then basically copies the .<target>.d file to stdout, in the
+ * process filtering out the dependency on autoconf.h and adding
+ * dependencies on include/config/my/option.h for every
+ * CONFIG_MY_OPTION encountered in any of the prequisites.
+ *
+ * It will also filter out all the dependencies on *.ver. We need
+ * to make sure that the generated version checksum are globally up
+ * to date before even starting the recursive build, so it's too late
+ * at this point anyway.
+ *
+ * The algorithm to grep for "CONFIG_..." is bit unusual, but should
+ * be fast ;-) We don't even try to really parse the header files, but
+ * merely grep, i.e. if CONFIG_FOO is mentioned in a comment, it will
+ * be picked up as well. It's not a problem with respect to
+ * correctness, since that can only give too many dependencies, thus
+ * we cannot miss a rebuild. Since people tend to not mention totally
+ * unrelated CONFIG_ options all over the place, it's not an
+ * efficiency problem either.
+ *
+ * (Note: it'd be easy to port over the complete mkdep state machine,
+ *  but I don't think the added complexity is worth it)
+ */
+/*
+ * Note 2: if somebody writes HELLO_CONFIG_BOOM in a file, it will depend onto
+ * CONFIG_BOOM. This could seem a bug (not too hard to fix), but please do not
+ * fix it! Some UserModeLinux files (look at arch/um/) call CONFIG_BOOM as
+ * UML_CONFIG_BOOM, to avoid conflicts with /usr/include/linux/autoconf.h,
+ * through arch/um/include/uml-config.h; this fixdep "bug" makes sure that
+ * those files will have correct dependencies.
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/mman.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <limits.h>
+#include <ctype.h>
+#include <arpa/inet.h>
+
+#define INT_CONF ntohl(0x434f4e46)
+#define INT_ONFI ntohl(0x4f4e4649)
+#define INT_NFIG ntohl(0x4e464947)
+#define INT_FIG_ ntohl(0x4649475f)
+
+char *target;
+char *depfile;
+char *cmdline;
+
+static void usage(void)
+{
+	fprintf(stderr, "Usage: fixdep <depfile> <target> <cmdline>\n");
+	exit(1);
+}
+
+/*
+ * Print out the commandline prefixed with cmd_<target filename> :=
+ */
+static void print_cmdline(void)
+{
+	printf("cmd_%s := %s\n\n", target, cmdline);
+}
+
+struct item {
+	struct item	*next;
+	unsigned int	len;
+	unsigned int	hash;
+	char		name[0];
+};
+
+#define HASHSZ 256
+static struct item *hashtab[HASHSZ];
+
+static unsigned int strhash(const char *str, unsigned int sz)
+{
+	/* fnv32 hash */
+	unsigned int i, hash = 2166136261U;
+
+	for (i = 0; i < sz; i++)
+		hash = (hash ^ str[i]) * 0x01000193;
+	return hash;
+}
+
+/*
+ * Lookup a value in the configuration string.
+ */
+static int is_defined_config(const char *name, int len, unsigned int hash)
+{
+	struct item *aux;
+
+	for (aux = hashtab[hash % HASHSZ]; aux; aux = aux->next) {
+		if (aux->hash == hash && aux->len == len &&
+		    memcmp(aux->name, name, len) == 0)
+			return 1;
+	}
+	return 0;
+}
+
+/*
+ * Add a new value to the configuration string.
+ */
+static void define_config(const char *name, int len, unsigned int hash)
+{
+	struct item *aux = malloc(sizeof(*aux) + len);
+
+	if (!aux) {
+		perror("fixdep:malloc");
+		exit(1);
+	}
+	memcpy(aux->name, name, len);
+	aux->len = len;
+	aux->hash = hash;
+	aux->next = hashtab[hash % HASHSZ];
+	hashtab[hash % HASHSZ] = aux;
+}
+
+/*
+ * Clear the set of configuration strings.
+ */
+static void clear_config(void)
+{
+	struct item *aux, *next;
+	unsigned int i;
+
+	for (i = 0; i < HASHSZ; i++) {
+		for (aux = hashtab[i]; aux; aux = next) {
+			next = aux->next;
+			free(aux);
+		}
+		hashtab[i] = NULL;
+	}
+}
+
+/*
+ * Record the use of a CONFIG_* word.
+ */
+static void use_config(const char *m, int slen)
+{
+	unsigned int hash = strhash(m, slen);
+	int c, i;
+
+	if (is_defined_config(m, slen, hash))
+	    return;
+
+	define_config(m, slen, hash);
+
+	printf("    $(wildcard include/config/");
+	for (i = 0; i < slen; i++) {
+		c = m[i];
+		if (c == '_')
+			c = '/';
+		else
+			c = tolower(c);
+		putchar(c);
+	}
+	printf(".h) \\\n");
+}
+
+static void parse_config_file(const char *map, size_t len)
+{
+	const int *end = (const int *) (map + len);
+	/* start at +1, so that p can never be < map */
+	const int *m   = (const int *) map + 1;
+	const char *p, *q;
+
+	for (; m < end; m++) {
+		if (*m == INT_CONF) { p = (char *) m  ; goto conf; }
+		if (*m == INT_ONFI) { p = (char *) m-1; goto conf; }
+		if (*m == INT_NFIG) { p = (char *) m-2; goto conf; }
+		if (*m == INT_FIG_) { p = (char *) m-3; goto conf; }
+		continue;
+	conf:
+		if (p > map + len - 7)
+			continue;
+		if (memcmp(p, "CONFIG_", 7))
+			continue;
+		for (q = p + 7; q < map + len; q++) {
+			if (!(isalnum(*q) || *q == '_'))
+				goto found;
+		}
+		continue;
+
+	found:
+		if (!memcmp(q - 7, "_MODULE", 7))
+			q -= 7;
+		if( (q-p-7) < 0 )
+			continue;
+		use_config(p+7, q-p-7);
+	}
+}
+
+/* test is s ends in sub */
+static int strrcmp(char *s, char *sub)
+{
+	int slen = strlen(s);
+	int sublen = strlen(sub);
+
+	if (sublen > slen)
+		return 1;
+
+	return memcmp(s + slen - sublen, sub, sublen);
+}
+
+static void do_config_file(const char *filename)
+{
+	struct stat st;
+	int fd;
+	void *map;
+
+	fd = open(filename, O_RDONLY);
+	if (fd < 0) {
+		fprintf(stderr, "fixdep: error opening config file: ");
+		perror(filename);
+		exit(2);
+	}
+	fstat(fd, &st);
+	if (st.st_size == 0) {
+		close(fd);
+		return;
+	}
+	map = mmap(NULL, st.st_size, PROT_READ, MAP_PRIVATE, fd, 0);
+	if ((long) map == -1) {
+		perror("fixdep: mmap");
+		close(fd);
+		return;
+	}
+
+	parse_config_file(map, st.st_size);
+
+	munmap(map, st.st_size);
+
+	close(fd);
+}
+
+/*
+ * Important: The below generated source_foo.o and deps_foo.o variable
+ * assignments are parsed not only by make, but also by the rather simple
+ * parser in scripts/mod/sumversion.c.
+ */
+static void parse_dep_file(void *map, size_t len)
+{
+	char *m = map;
+	char *end = m + len;
+	char *p;
+	char s[PATH_MAX];
+	int is_target;
+	int saw_any_target = 0;
+	int is_first_dep = 0;
+
+	clear_config();
+
+	while (m < end) {
+		/* Skip any "white space" */
+		while (m < end && (*m == ' ' || *m == '\\' || *m == '\n'))
+			m++;
+		/* Find next "white space" */
+		p = m;
+		while (p < end && *p != ' ' && *p != '\\' && *p != '\n')
+			p++;
+		/* Is the token we found a target name? */
+		is_target = (*(p-1) == ':');
+		/* Don't write any target names into the dependency file */
+		if (is_target) {
+			/* The /next/ file is the first dependency */
+			is_first_dep = 1;
+		} else {
+			/* Save this token/filename */
+			memcpy(s, m, p-m);
+			s[p - m] = 0;
+
+			/* Ignore certain dependencies */
+			if (strrcmp(s, "include/generated/autoconf.h") &&
+			    strrcmp(s, "arch/um/include/uml-config.h") &&
+			    strrcmp(s, "include/linux/kconfig.h") &&
+			    strrcmp(s, ".ver")) {
+				/*
+				 * Do not list the source file as dependency,
+				 * so that kbuild is not confused if a .c file
+				 * is rewritten into .S or vice versa. Storing
+				 * it in source_* is needed for modpost to
+				 * compute srcversions.
+				 */
+				if (is_first_dep) {
+					/*
+					 * If processing the concatenation of
+					 * multiple dependency files, only
+					 * process the first target name, which
+					 * will be the original source name,
+					 * and ignore any other target names,
+					 * which will be intermediate temporary
+					 * files.
+					 */
+					if (!saw_any_target) {
+						saw_any_target = 1;
+						printf("source_%s := %s\n\n",
+							target, s);
+						printf("deps_%s := \\\n",
+							target);
+					}
+					is_first_dep = 0;
+				} else
+					printf("  %s \\\n", s);
+				do_config_file(s);
+			}
+		}
+		/*
+		 * Start searching for next token immediately after the first
+		 * "whitespace" character that follows this token.
+		 */
+		m = p + 1;
+	}
+
+	if (!saw_any_target) {
+		fprintf(stderr, "fixdep: parse error; no targets found\n");
+		exit(1);
+	}
+
+	printf("\n%s: $(deps_%s)\n\n", target, target);
+	printf("$(deps_%s):\n", target);
+}
+
+static void print_deps(void)
+{
+	struct stat st;
+	int fd;
+	void *map;
+
+	fd = open(depfile, O_RDONLY);
+	if (fd < 0) {
+		fprintf(stderr, "fixdep: error opening depfile: ");
+		perror(depfile);
+		exit(2);
+	}
+	if (fstat(fd, &st) < 0) {
+                fprintf(stderr, "fixdep: error fstat'ing depfile: ");
+                perror(depfile);
+                exit(2);
+        }
+	if (st.st_size == 0) {
+		fprintf(stderr,"fixdep: %s is empty\n",depfile);
+		close(fd);
+		return;
+	}
+	map = mmap(NULL, st.st_size, PROT_READ, MAP_PRIVATE, fd, 0);
+	if ((long) map == -1) {
+		perror("fixdep: mmap");
+		close(fd);
+		return;
+	}
+
+	parse_dep_file(map, st.st_size);
+
+	munmap(map, st.st_size);
+
+	close(fd);
+}
+
+static void traps(void)
+{
+	static char test[] __attribute__((aligned(sizeof(int)))) = "CONF";
+	int *p = (int *)test;
+
+	if (*p != INT_CONF) {
+		fprintf(stderr, "fixdep: sizeof(int) != 4 or wrong endianness? %#x\n",
+			*p);
+		exit(2);
+	}
+}
+
+int main(int argc, char *argv[])
+{
+	traps();
+
+	if (argc != 4)
+		usage();
+
+	depfile = argv[1];
+	target = argv[2];
+	cmdline = argv[3];
+
+	print_cmdline();
+	print_deps();
+
+	return 0;
+}
diff --git a/scripts/mkmakefile b/scripts/mkmakefile
new file mode 100644
index 0000000..0cc0442
--- /dev/null
+++ b/scripts/mkmakefile
@@ -0,0 +1,59 @@
+#!/bin/sh
+# Generates a small Makefile used in the root of the output
+# directory, to allow make to be started from there.
+# The Makefile also allow for more convinient build of external modules
+
+# Usage
+# $1 - Kernel src directory
+# $2 - Output directory
+# $3 - version
+# $4 - patchlevel
+
+
+test ! -r $2/Makefile -o -O $2/Makefile || exit 0
+# Only overwrite automatically generated Makefiles
+# (so we do not overwrite kernel Makefile)
+if test -e $2/Makefile && ! grep -q Automatically $2/Makefile
+then
+	exit 0
+fi
+if [ "${quiet}" != "silent_" ]; then
+	echo "  GEN     $2/Makefile"
+fi
+
+cat << EOF > $2/Makefile
+# Automatically generated by $0: don't edit
+
+VERSION = $3
+PATCHLEVEL = $4
+
+lastword = \$(word \$(words \$(1)),\$(1))
+makedir := \$(dir \$(call lastword,\$(MAKEFILE_LIST)))
+
+ifeq ("\$(origin V)", "command line")
+VERBOSE := \$(V)
+endif
+ifneq (\$(VERBOSE),1)
+Q := @
+endif
+
+MAKEARGS := -C $1
+MAKEARGS += O=\$(if \$(patsubst /%,,\$(makedir)),\$(CURDIR)/)\$(patsubst %/,%,\$(makedir))
+
+MAKEFLAGS += --no-print-directory
+
+.PHONY: all \$(MAKECMDGOALS)
+
+all	:= \$(filter-out all Makefile,\$(MAKECMDGOALS))
+
+all:
+	\$(Q)\$(MAKE) \$(MAKEARGS) \$(all)
+
+Makefile:;
+
+\$(all): all
+	@:
+
+%/: all
+	@:
+EOF
-- 
1.8.3.2



More information about the U-Boot mailing list