[U-Boot] [PATCH 2/7 V3] mmc: Get secure erase information from card

[Haijun Zhang]

Read command class from csd register and secure erase
support bit from ext csd register. Also calculate the erase
timeout and secure erase timeout.

If read ext csd error, error status should be returned instead of
give some incorrect information.

Error log:
=>
=> mmcinfo
Device: FSL_SDHC
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0 Bytes
Bus Width: 1-bit
=>

Signed-off-by: Haijun Zhang <haijun.zhang at freescale.com>
---
changes for V3:
	- Change the erase group size to be block aligned.

 drivers/mmc/mmc.c | 52 ++++++++++++++++++++++++++++++++++++++--------------
 1 file changed, 38 insertions(+), 14 deletions(-)

diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index e1461a9..e8dbb8c 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -871,6 +871,8 @@ static int mmc_startup(struct mmc *mmc)
 		}
 	}
 
+	mmc->cmdclass = cmd.response[1] >> 20;
+
 	/* divide frequency by 10, since the mults are 10x bigger */
 	freq = fbase[(cmd.response[0] & 0x7)];
 	mult = multipliers[((cmd.response[0] >> 3) & 0xf)];
@@ -939,7 +941,8 @@ static int mmc_startup(struct mmc *mmc)
 			capacity *= MMC_MAX_BLOCK_LEN;
 			if ((capacity >> 20) > 2 * 1024)
 				mmc->capacity_user = capacity;
-		}
+		} else
+			return COMM_ERR;
 
 		switch (ext_csd[EXT_CSD_REV]) {
 		case 1:
@@ -960,6 +963,39 @@ static int mmc_startup(struct mmc *mmc)
 		}
 
 		/*
+		 * The granularity of the erasable units is the Erase Group:The
+		 * smallest number of consecutive write blocks which can be
+		 * addressed for erase. The size of the Erase Group is card
+		 * specific and stored in the CSD when ERASE_GROUP_DEF is
+		 * disabled, and in the EXT_CSD when ERASE_GROUP_DEF is
+		 * enabled.
+		 */
+		if (ext_csd[EXT_CSD_ERASE_GROUP_DEF]) {
+			mmc->erase_grp_size =
+				ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] * 1024;
+
+			mmc->erase_timeout_mult = 300 *
+				ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT];
+		} else {
+			/* Calculate the group size from the csd value. */
+			int erase_gsz, erase_gmul;
+			erase_gsz = (mmc->csd[2] & 0x00007c00) >> 10;
+			erase_gmul = (mmc->csd[2] & 0x000003e0) >> 5;
+			mmc->erase_grp_size = (erase_gsz + 1)
+				* (erase_gmul + 1);
+		}
+
+		if (ext_csd[EXT_CSD_REV] >= 4) {
+			mmc->sec_feature_support =
+				ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT];
+			mmc->sec_erase_mult =
+				ext_csd[EXT_CSD_SEC_ERASE_MULT];
+			mmc->sec_erase_timeout = 300 *
+				ext_csd[EXT_CSD_SEC_ERASE_MULT] *
+				ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT];
+		}
+
+		/*
 		 * Host needs to enable ERASE_GRP_DEF bit if device is
 		 * partitioned. This bit will be lost every time after a reset
 		 * or power off. This will affect erase size.
@@ -968,23 +1004,11 @@ static int mmc_startup(struct mmc *mmc)
 		    (ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE] & PART_ENH_ATTRIB)) {
 			err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
 				EXT_CSD_ERASE_GROUP_DEF, 1);
-
 			if (err)
 				return err;
-
-			/* Read out group size from ext_csd */
-			mmc->erase_grp_size =
-				ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] *
-					MMC_MAX_BLOCK_LEN * 1024;
-		} else {
-			/* Calculate the group size from the csd value. */
-			int erase_gsz, erase_gmul;
-			erase_gsz = (mmc->csd[2] & 0x00007c00) >> 10;
-			erase_gmul = (mmc->csd[2] & 0x000003e0) >> 5;
-			mmc->erase_grp_size = (erase_gsz + 1)
-				* (erase_gmul + 1);
 		}
 
+
 		/* store the partition info of emmc */
 		if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) ||
 		    ext_csd[EXT_CSD_BOOT_MULT])
-- 
1.8.4.1