[U-Boot] [PATCH v2 13/35] zynq: Add zynq zc70x board support

[Jagannadha Sutradharudu Teki]

The Zynq-7000 APSOC zc702 and zc706 enabled complte embedded
processing includes ASIC and FPGA design.

ZC702-:

APSOC:
- XC7Z020-CLG484-1
Memory:
- DDR3 Component Memory 1GB
- 16MB Quad SPI Flash
- IIC - 1 KB EEPROM
Connectivity:
- Gigabit Ethernet GMII, RGMII and SGMII.
- USB OTG - Host USB
- IIC Bus Headers/HUB
- 1 CAN with Wake on CAN
- USB-UART
Video/Display:
- HDMI Video OUT
- 8X LEDs
Control & I/O:
- 3 User Push Buttons
- 2 User Switches
- 8 User LEDs

For more info on zc702 board:
- http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm

ZC706-:

APSOC:
- XC7Z045 FFG900 -2 AP SoC
Memory:
- DDR3 Component Memory 1GB (PS)
- DDR3 SODIM Memory 1GB (PL)
- 2X16MB Quad SPI Flash (dual parallel)
- IIC - 1 KB EEPROM
Connectivity:
- PCIe Gen2x4
- SFP+ and SMA Pairs
- GigE RGMII Ethernet (PS)
- USB OTG 1 (PS) - Host USB
- IIC Bus Headers/HUB (PS)
- 1 CAN with Wake on CAN (PS)
- USB-UART
Video/Display:
- HDMI 8 color RGB 4.4.4 1080P-60 OUT
- HDMI IN 8 color RGB 4.4.4
Control & I/O:
- 2 User Push Buttons/Dip Switch, 2 User LEDs
- IIC access to GPIO
- SDIO (SD Card slot)
- 3 User Push Buttons, 2 User Switches, 8 User LEDs

For more info on zc706 board:
- http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
---
V2: Updated domain name in mail ids'

 boards.cfg                    |  1 +
 include/configs/zynq-common.h |  9 ---------
 include/configs/zynq_zc70x.h  | 26 ++++++++++++++++++++++++++
 3 files changed, 27 insertions(+), 9 deletions(-)
 create mode 100644 include/configs/zynq_zc70x.h

diff --git a/boards.cfg b/boards.cfg
index 570d141..9f0374f 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -354,6 +354,7 @@ Active  arm         armv7          socfpga     altera          socfpga
 Active  arm         armv7          u8500       st-ericsson     snowball            snowball                             -                                                                                                                                 Mathieu Poirier <mathieu.poirier at linaro.org>
 Active  arm         armv7          u8500       st-ericsson     u8500               u8500_href                           -                                                                                                                                 -
 Active  arm         armv7          vf610       freescale       vf610twr            vf610twr                             vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg                                                                         Alison Wang <b18965 at freescale.com>
+Active  arm	    armv7	   zynq	       xilinx	       zynq	   	   zynq_zc70x				-                                                                                                                                 Michal Simek <monstr at monstr.eu>:Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
 Active  arm         armv7:arm720t  tegra114    nvidia          dalmore             dalmore                              -                                                                                                                                 Tom Warren <twarren at nvidia.com>
 Active  arm         armv7:arm720t  tegra20     avionic-design  medcom-wide         medcom-wide                          -                                                                                                                                 Thierry Reding <thierry.reding at avionic-design.de>
 Active  arm         armv7:arm720t  tegra20     avionic-design  plutux              plutux                               -                                                                                                                                 Thierry Reding <thierry.reding at avionic-design.de>
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index e6990ea..4896232 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -36,7 +36,6 @@
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
 /* Zynq Serial driver */
-#define CONFIG_ZYNQ_SERIAL_UART1
 #ifdef CONFIG_ZYNQ_SERIAL_UART0
 # define CONFIG_ZYNQ_SERIAL_BASEADDR0	0xE0000000
 # define CONFIG_ZYNQ_SERIAL_BAUDRATE0	CONFIG_BAUDRATE
@@ -60,8 +59,6 @@
 #endif
 
 /* Ethernet driver */
-#define CONFIG_ZYNQ_GEM0
-#define CONFIG_ZYNQ_GEM_PHY_ADDR0	7
 #if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
 # define CONFIG_NET_MULTI
 # define CONFIG_ZYNQ_GEM
@@ -71,7 +68,6 @@
 # define CONFIG_PHY_MARVELL
 #endif
 
-#define CONFIG_ZYNQ_SPI
 /* SPI */
 #ifdef CONFIG_ZYNQ_SPI
 # define CONFIG_SPI_FLASH
@@ -89,10 +85,6 @@
 # define CONFIG_SPI_FLASH_WINBOND
 #endif
 
-/* NOR */
-#define CONFIG_SYS_NO_FLASH
-
-#define CONFIG_ZYNQ_SDHCI0
 /* MMC */
 #if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
 # define CONFIG_MMC
@@ -106,7 +98,6 @@
 # define CONFIG_DOS_PARTITION
 #endif
 
-#define CONFIG_ZYNQ_I2C0
 /* I2C */
 #if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
 # define CONFIG_CMD_I2C
diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h
new file mode 100644
index 0000000..559cd19
--- /dev/null
+++ b/include/configs/zynq_zc70x.h
@@ -0,0 +1,26 @@
+/*
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Configuration settings for the Xilinx Zynq ZC702 and ZC706 boards
+ * See zynq_common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_ZC70X_H
+#define __CONFIG_ZYNQ_ZC70X_H
+
+#define CONFIG_ZYNQ_SERIAL_UART1
+#define CONFIG_ZYNQ_GEM0
+#define CONFIG_ZYNQ_GEM_PHY_ADDR0	7
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ZYNQ_QSPI
+#define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_ZYNQ_I2C0
+#define CONFIG_ZYNQ_BOOT_FREEBSD
+
+#include <configs/zynq-common.h>
+
+#endif /* __CONFIG_ZYNQ_ZC70X_H */
-- 
1.8.3