[U-Boot] [PATCH v1 1/2] mtd: nand: omap: fix ecclayout->oobfree->offset

Pekon Gupta pekon at ti.com
Fri Dec 13 10:12:57 CET 2013


This patch updates starting offset for free bytes in OOB which can be used by
file-systems to store their metadata (like clean-marker in case of JFFS2).

Signed-off-by: Pekon Gupta <pekon at ti.com>
---
 drivers/mtd/nand/omap2.c | 17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index f777250..bbdb5e8 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1835,8 +1835,6 @@ static int omap_nand_probe(struct platform_device *pdev)
 			ecclayout->eccpos[0]	= BADBLOCK_MARKER_LENGTH;
 		else
 			ecclayout->eccpos[0]	= 1;
-		ecclayout->oobfree->offset	= ecclayout->eccpos[0] +
-							ecclayout->eccbytes;
 		break;
 
 	case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
@@ -1854,8 +1852,6 @@ static int omap_nand_probe(struct platform_device *pdev)
 							(mtd->writesize /
 							nand_chip->ecc.size);
 		ecclayout->eccpos[0]		= BADBLOCK_MARKER_LENGTH;
-		ecclayout->oobfree->offset	= ecclayout->eccpos[0] +
-							ecclayout->eccbytes;
 		/* software bch library is used for locating errors */
 		nand_chip->ecc.priv		= nand_bch_init(mtd,
 							nand_chip->ecc.size,
@@ -1890,8 +1886,6 @@ static int omap_nand_probe(struct platform_device *pdev)
 							(mtd->writesize /
 							nand_chip->ecc.size);
 		ecclayout->eccpos[0]		= BADBLOCK_MARKER_LENGTH;
-		ecclayout->oobfree->offset	= ecclayout->eccpos[0] +
-							ecclayout->eccbytes;
 		/* This ECC scheme requires ELM H/W block */
 		if (is_elm_present(info, pdata->elm_of_node, BCH4_ECC) < 0) {
 			pr_err("nand: error: could not initialize ELM\n");
@@ -1920,8 +1914,6 @@ static int omap_nand_probe(struct platform_device *pdev)
 							(mtd->writesize /
 							nand_chip->ecc.size);
 		ecclayout->eccpos[0]		= BADBLOCK_MARKER_LENGTH;
-		ecclayout->oobfree->offset	= ecclayout->eccpos[0] +
-							ecclayout->eccbytes;
 		/* software bch library is used for locating errors */
 		nand_chip->ecc.priv		= nand_bch_init(mtd,
 							nand_chip->ecc.size,
@@ -1963,8 +1955,6 @@ static int omap_nand_probe(struct platform_device *pdev)
 							(mtd->writesize /
 							nand_chip->ecc.size);
 		ecclayout->eccpos[0]		= BADBLOCK_MARKER_LENGTH;
-		ecclayout->oobfree->offset	= ecclayout->eccpos[0] +
-							ecclayout->eccbytes;
 		break;
 #else
 		pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n");
@@ -1978,9 +1968,6 @@ static int omap_nand_probe(struct platform_device *pdev)
 		goto return_error;
 	}
 
-	/* populate remaining ECC layout data */
-	ecclayout->oobfree->length = mtd->oobsize - (BADBLOCK_MARKER_LENGTH +
-							ecclayout->eccbytes);
 	for (i = 1; i < ecclayout->eccbytes; i++)
 		ecclayout->eccpos[i] = ecclayout->eccpos[0] + i;
 	/* check if NAND device's OOB is enough to store ECC signatures */
@@ -1990,6 +1977,10 @@ static int omap_nand_probe(struct platform_device *pdev)
 		err = -EINVAL;
 		goto return_error;
 	}
+	/* populate remaining ECC layout data */
+	ecclayout->oobfree->offset = ecclayout->eccpos[ecclayout->eccbytes] + 1;
+	ecclayout->oobfree->length = mtd->oobsize - (BADBLOCK_MARKER_LENGTH +
+							ecclayout->eccbytes);
 
 	/* second phase scan */
 	if (nand_scan_tail(mtd)) {
-- 
1.8.1



More information about the U-Boot mailing list