[U-Boot] [PATCH 1/3] arm: atmel: sama5d3: add spi spl boot support

Bo Shen voice.shen at atmel.com
Mon Dec 2 04:24:21 CET 2013


Add SPI SPL boot support for sama5d3xek board.

Signed-off-by: Bo Shen <voice.shen at atmel.com>
---
 arch/arm/cpu/at91-common/spl.c       |    2 ++
 arch/arm/include/asm/arch-at91/spl.h |    2 ++
 board/atmel/sama5d3xek/sama5d3xek.c  |    2 ++
 include/configs/sama5d3xek.h         |   11 +++++++++++
 4 files changed, 17 insertions(+)

diff --git a/arch/arm/cpu/at91-common/spl.c b/arch/arm/cpu/at91-common/spl.c
index 37c0cc4..2598e09 100644
--- a/arch/arm/cpu/at91-common/spl.c
+++ b/arch/arm/cpu/at91-common/spl.c
@@ -52,6 +52,8 @@ u32 spl_boot_device(void)
 {
 #ifdef CONFIG_SYS_USE_MMC
 	return BOOT_DEVICE_MMC1;
+#elif CONFIG_SYS_USE_SERIALFLASH
+	return BOOT_DEVICE_SPI;
 #endif
 	return BOOT_DEVICE_NONE;
 }
diff --git a/arch/arm/include/asm/arch-at91/spl.h b/arch/arm/include/asm/arch-at91/spl.h
index 68c5349..f4ced49 100644
--- a/arch/arm/include/asm/arch-at91/spl.h
+++ b/arch/arm/include/asm/arch-at91/spl.h
@@ -14,6 +14,8 @@ enum {
 	BOOT_DEVICE_MMC1,
 	BOOT_DEVICE_MMC2,
 	BOOT_DEVICE_MMC2_2,
+#elif CONFIG_SYS_USE_SERIALFLASH
+	BOOT_DEVICE_SPI,
 #endif
 };
 
diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c
index 0ab8020..e764c62 100644
--- a/board/atmel/sama5d3xek/sama5d3xek.c
+++ b/board/atmel/sama5d3xek/sama5d3xek.c
@@ -306,6 +306,8 @@ void spl_board_init(void)
 {
 #ifdef CONFIG_SYS_USE_MMC
 	sama5d3xek_mci_hw_init();
+#elif CONFIG_SYS_USE_SERIALFLASH
+	at91_spi0_hw_init(1 << 0);
 #endif
 }
 
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index c34feb5..510f22c 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -258,6 +258,8 @@
 #define CONFIG_SPL_SERIAL_SUPPORT
 
 #define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_MONITOR_LEN		(512 << 10)
+
 #ifdef CONFIG_SYS_USE_MMC
 #define CONFIG_SPL_LDSCRIPT		arch/arm/cpu/at91-common/u-boot-spl.lds
 #define CONFIG_SPL_MMC_SUPPORT
@@ -267,6 +269,15 @@
 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT
+
+#elif CONFIG_SYS_USE_SERIALFLASH
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_BUS		0
+#define CONFIG_SPL_SPI_CS		0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8400
+
 #endif
 
 #endif
-- 
1.7.9.5



More information about the U-Boot mailing list