[U-Boot] [U-Boot,v3,1/2] arm, at91: add Siemens board taurus and axm

Andreas Bießmann andreas.devel at googlemail.com
Mon Dec 9 13:38:50 CET 2013


Dear Heiko Schocher,

Heiko Schocher <hs at denx.de> writes:
>enable support for the siemens AT91SAM9G20 based boards taurus
>and axm.
>
>Signed-off-by: Roger Meier <r.meier at siemens.com>
>Reviewed-by: Heiko Schocher <hs at denx.de>
>Cc: Andreas Bießmann <andreas.devel at googlemail.com>
>Cc: Bo Shen <voice.shen at atmel.com>
>
>---
>- changes for v2:
>  - add comments from bo shen
>    - use gpio api
>    - remove unneccessary comment
>    - use at91_wait_for_reset()
>    - remove unneccessary code in board file
>    - Coding Style cleanup (tabs and unneccessary 1 after config define
>      removed)
>    - add commit message
>  - add comments from Andreas Bießmann <andreas.devel at googlemail.com>:
>    - detect sdram size on startup without read dram setting
>    - get rid of MACH_TYPE definition in config file
>- changes for v3:
>  - add comments from Andreas Bießmann:
>    - remove empty line
>    - move at91_seriald_hw_init to early_init
>    - include <net.h> unconditionally
>  - rebased against current commit
>    2cee0408e5c6f5dbdfa89fb40168ba2ead3f61a6
>  - rebased based on the spl patches from Bo Shen, see:
>    http://lists.denx.de/pipermail/u-boot/2013-November/166272.html
>  - add CONFIG_AT91_WANTS_COMMON_PHY
>---
> board/siemens/taurus/Makefile |  18 +++++
> board/siemens/taurus/taurus.c | 160 ++++++++++++++++++++++++++++++++++++++++++
> boards.cfg                    |   2 +
> include/configs/taurus.h      | 160 ++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 340 insertions(+)
> create mode 100644 board/siemens/taurus/Makefile
> create mode 100644 board/siemens/taurus/taurus.c
> create mode 100644 include/configs/taurus.h

applied to u-boot-atmel/master, thanks!

Best regards,
Andreas Bießmann


More information about the U-Boot mailing list