[U-Boot] [U-Boot, V2] mtd: nand: omap: fix HAM1_SW ecc using default value for ecc.size

[Scott Wood]

On Thu, Dec 12, 2013 at 03:19:31PM +0200, Nikita Kiryanov wrote:
> Commit "mtd: nand: omap: enable BCH ECC scheme using ELM for generic
> platform" (d016dc42cedbf6102e100fa9ecb58462edfb14f8) changed the way
> software ECC is configured, both during boot, and during ecc switch, in a way
> that is not backwards compatible with older systems:
> 
> Older version of omap_gpmc.c always assigned ecc.size = 0 when configuring
> for software ecc, relying on nand_scan_tail() to select a default for ecc.size
> (256), while the new version of omap_gpmc.c assigns ecc.size = pagesize,
> which is likely to not be 256.
> 
> Since 1 bit hamming sw ecc is only meant to be used by legacy devices, revert
> to the original behavior.
> 
> Cc: Igor Grinberg <grinberg at compulab.co.il>
> Cc: Tom Rini <trini at ti.com>
> Cc: Scott Wood <scottwood at freescale.com>
> Cc: Pekon Gupta <pekon at ti.com>
> Signed-off-by: Nikita Kiryanov <nikita at compulab.co.il>
> Acked-by: Pekon Gupta <pekon at ti.com>
> 
> ---
> Changes in V2:
> 	- reworded commit title to better reflect what is being affected (Pekon
> 	Gupta)
> 
>  drivers/mtd/nand/omap_gpmc.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Applied to u-boot-nand-flash.git

-Scott