[U-Boot] [PATCH 5/5] ARM: mx6: Enable PCIe on Sabrelite
Marek Vasut
marex at denx.de
Tue Dec 3 10:12:13 CET 2013
Hi Eric,
> Hi Marek,
>
> On 11/29/2013 05:06 PM, Marek Vasut wrote:
> > Dear Stefano Babic,
> >
> >> Hi Eric, Marek,
> >>
> >> On 27/11/2013 17:19, Eric Nelson wrote:
> >>> It seems to lock up the system if you don't have the proper
> >>> device connected.
> >>>
> >>> Without this bit, I was able to confirm proper enumeration
> >>>
> >>> of a PCIe bus with a USB 3.0 controller:
> >>> 00:01.0 - 16c3:abcd - Bridge device
> >>> 01:00.0 - 1b21:0612 - Mass storage controller
> >>>
> >>> Unfortunately, in a quick test, the image fails to boot
> >>> without a PCIe device connected, or oddly, with a different
> >>> PCIe ethernet controller connected.
> >>>
> >>> I think it's handy to have the placeholder here, but
> >>> I think you're the only person on the planet with the
> >>> right set of components to make it work at the moment.
> >>
> >> Waiting for someone from Mars is coming to help Marek, I'll put the
> >> patchset in the -next for better testing.
> >
> > I got a hint from fourth dimension, let's see if the patch I produced in
> > a higher level of consciousness helps ... let's hope I wasn't too high
> > (pun intended, lol!)
>
> Sorry for the delayed response. The holiday got in the way
> of testing.
No problem ;-)
> I think I already had this patch.
The one I attached is a new one. I suppose that one fixes your lockups and stuff
:)
> I tested with these
> patches against Stefano's master branch:
>
> 0001-ARM-mx6-Update-non-Freescale-boards-to-include-CPU-e.patch
> 0002-ARM-armv7-Make-indirect-vector-addresses-globl.patch
> 0003-ARM-lib-Add-cpu_clock_teardown-call.patch
> 0004-ARM-mx6-Add-PCI-express-clock-configuration.patch
> 0005-ARM-mx6-Add-PCI-express-driver.patch
> 0006-ARM-mx6-Enable-PCIe-on-Sabrelite.patch
>
> I also apologize for some bad information the other day.
>
> I saw (and reported) lock-ups during PCIE bus enumeration,
> but I can't seem to reproduce them tonight.
>
> I've tested against three different PCIe devices, and with
> nothing connected, and everything boots.
>
> As I mentioned, we don't have one of the ethernet
> adapters you're using, but this patch set doesn't appear to
> break anything.
>
> I'll try on some other boards over the coming days and
> let you know if I see any issues.
>
> Regards,
>
>
> Eric
Best regards,
Marek Vasut
More information about the U-Boot
mailing list