[U-Boot] [PATCH 2/2] vexpress: Add vexpress qemu variant

Albert ARIBAUD albert.u.boot at aribaud.net
Mon Dec 16 17:08:00 CET 2013


Hi Ian,

On Sun, 17 Nov 2013 15:17:43 +0000, Ian Campbell <ijc at hellion.org.uk>
wrote:

> The main purpose of this is to disable the use of the virtualisation extensions
> which Qemu does not emulate.
> 
> Also enable a few additional commands and the u-boot API.
> 
> This works for me with:
> $ dd if=/dev/zero of=pflash0.img bs=1M count=64
> $ dd if=/dev/zero of=pflash1.img bs=1M count=64
> $ qemu-system-arm -M vexpress-a15 -cpu cortex-a15 -kernel u-boot -m 1024m -sd mmc.img -nographic -pflash pflash0.img -pflash pflash1.img
> 
> (for some reason both pflash images are needed for saveenv to work)

Please split the above as follows:

- a short problem and solution description in the commit message,
  above the commit message delimiter '---';

- anything else (examples, comments, etc) below the commit delimiter.
 
> Signed-off-by: Ian Campbell <ijc at hellion.org.uk>
> Cc: albert.u.boot at aribaud.net
> ---
>  boards.cfg                          | 1 +
>  include/configs/vexpress_ca15_tc2.h | 2 ++
>  include/configs/vexpress_common.h   | 4 ++++
>  3 files changed, 7 insertions(+)
> 
> diff --git a/boards.cfg b/boards.cfg
> index caba64e..6e2fccc 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -245,6 +245,7 @@ Active  arm         arm926ejs      versatile   armltd          versatile
>  Active  arm         arm946es       -           armltd          integrator          integratorap_cm946es                 integratorap:CM946ES                                                                                                              Linus Walleij <linus.walleij at linaro.org>
>  Active  arm         arm946es       -           armltd          integrator          integratorcp_cm946es                 integratorcp:CM946ES                                                                                                              Linus Walleij <linus.walleij at linaro.org>
>  Active  arm         armv7          -           armltd          vexpress            vexpress_ca15_tc2                    -                                                                                                                                 -
> +Active  arm         armv7          -           armltd          vexpress            vexpress_ca15_tc2_qemu               vexpress_ca15_tc2:ARCH_VEXPRESS_QEMU                                                                                              -
>  Active  arm         armv7          -           armltd          vexpress            vexpress_ca5x2                       -                                                                                                                                 Matt Waddel <matt.waddel at linaro.org>
>  Active  arm         armv7          -           armltd          vexpress            vexpress_ca9x4                       -                                                                                                                                 Matt Waddel <matt.waddel at linaro.org>
>  Active  arm         armv7          am33xx      isee            igep0033            am335x_igep0033                      -                                                                                                                                 Enric Balletbo i Serra <eballetbo at iseebcn.com>
> diff --git a/include/configs/vexpress_ca15_tc2.h b/include/configs/vexpress_ca15_tc2.h
> index 982f4a7..ccdb3c5 100644
> --- a/include/configs/vexpress_ca15_tc2.h
> +++ b/include/configs/vexpress_ca15_tc2.h
> @@ -18,6 +18,8 @@
>  #define CONFIG_SYSFLAGS_ADDR	0x1c010030
>  #define CONFIG_SMP_PEN_ADDR	CONFIG_SYSFLAGS_ADDR
>  
> +#ifndef CONFIG_ARCH_VEXPRESS_QEMU
>  #define CONFIG_ARMV7_VIRT
> +#endif
>  
>  #endif
> diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h
> index 7e78f8a..fbb9993 100644
> --- a/include/configs/vexpress_common.h
> +++ b/include/configs/vexpress_common.h
> @@ -157,6 +157,7 @@
>  #define CONFIG_CMD_DHCP
>  #define CONFIG_CMD_PXE
>  #define CONFIG_MENU
> +#define CONFIG_CMD_ECHO

Here and below, you are adding commands generally, i.e. not specifically
for the new boards you're creating. I'd rather have this in a separate
patch.

>  #define CONFIG_CMD_ELF
>  #define CONFIG_CMD_ENV
>  #define CONFIG_CMD_FLASH
> @@ -164,6 +165,7 @@
>  #define CONFIG_CMD_MEMORY
>  #define CONFIG_CMD_NET
>  #define CONFIG_CMD_PING
> +#define CONFIG_CMD_EXT2
>  #define CONFIG_CMD_SAVEENV
>  #define CONFIG_CMD_RUN
>  #define CONFIG_CMD_BOOTZ
> @@ -176,6 +178,7 @@
>  #define CONFIG_GENERIC_MMC
>  #define CONFIG_ARM_PL180_MMCI
>  #define CONFIG_ARM_PL180_MMCI_BASE	V2M_MMCI
> +#define CONFIG_SYS_MMC_MAX_DEVICE	2
>  #define CONFIG_SYS_MMC_MAX_BLK_COUNT	127
>  #define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000
>  
> @@ -253,6 +256,7 @@
>  #define CONFIG_SYS_FLASH_BASE0		V2M_NOR0
>  #define CONFIG_SYS_FLASH_BASE1		V2M_NOR1
>  #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE0
> +#define CONFIG_API
>  
>  /* Timeout values in ticks */
>  #define CONFIG_SYS_FLASH_ERASE_TOUT	(2 * CONFIG_SYS_HZ) /* Erase Timeout */


Amicalement,
-- 
Albert.


More information about the U-Boot mailing list