[U-Boot] [PATCH 1/3 V2] esdhc: Workaround for card can't be detected on T4240QDS

Haijun Zhang haijun.zhang at freescale.com
Wed Dec 11 06:35:44 CET 2013


Card detection pin is ineffective on T4240QDS Rev1.0.
There are two cards can be connected to board.
1. eMMC card is built-in board, can not be removed. so
   For eMMC card it is always there.
2. Card detecting pin is functional for SDHC card in Rev2.0.

This workaround force sdhc driver scan and initialize the card
regardless of whether the card is inserted or not in case Rev1.0.

Signed-off-by: Haijun Zhang <Haijun.Zhang at freescale.com>
---
changes for V2:
	- Add the judgement condition for this broken card

 drivers/mmc/fsl_esdhc.c    | 9 +++++++++
 include/configs/T4240QDS.h | 2 ++
 2 files changed, 11 insertions(+)

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 134a02d..b3b5f37 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -548,6 +548,15 @@ static int esdhc_getcd(struct mmc *mmc)
 	struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
 	int timeout = 1000;
 
+	/*
+	 * Card detecting pin is not functional on T4240QDS with rev 1.0 SoC.
+	 * Presuming card is present.
+	 */
+#if defined(CONFIG_T4240QDS)
+	if (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC) ||
+			IS_SVR_REV(get_svr(), 1, 0))
+		return 1;
+#endif
 	while (!(esdhc_read32(&regs->prsstat) & PRSSTAT_CINS) && --timeout)
 		udelay(1000);
 
diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h
index c96df54..955e6b9 100644
--- a/include/configs/T4240QDS.h
+++ b/include/configs/T4240QDS.h
@@ -165,6 +165,8 @@ unsigned long get_board_ddr_clk(void);
 #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
 #define QIXIS_RCFG_CTL_RECONFIG_START	0x21
 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
+#define QIXIS_BRDCFG5			0x55
+#define QIXIS_MUX_SDHC			2
 #define QIXIS_BASE_PHYS		(0xf00000000ull | QIXIS_BASE)
 
 #define CONFIG_SYS_CSPR3_EXT	(0xf)
-- 
1.8.4.1




More information about the U-Boot mailing list