[U-Boot] [PATCH v3 30/36] Kbuild: refactor Makefile and spl/Makefile more
Masahiro Yamada
yamada.m at jp.panasonic.com
Fri Dec 27 06:35:58 CET 2013
This commit refactors rules of directory descending
and defines u-boot-dirs and u-boot-all-dirs.
(We will need u-boot-all-dirs when using
scripts/Makefile.clean)
Additionally, rename LIBS-y to libs-y.
Signed-off-by: Masahiro Yamada <yamada.m at jp.panasonic.com>
---
Changes in v3: None
Changes in v2: None
Makefile | 163 ++++++++++++++++++++++++++++++-----------------------------
spl/Makefile | 106 +++++++++++++++++++-------------------
2 files changed, 139 insertions(+), 130 deletions(-)
diff --git a/Makefile b/Makefile
index a958cd4..94caa49 100644
--- a/Makefile
+++ b/Makefile
@@ -586,17 +586,7 @@ CHECKFLAGS += $(NOSTDINC_FLAGS)
cpp_flags := $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(UBOOTINCLUDE) $(NOSTDINC_FLAGS)
c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
-# The "tools" are needed early, so put this first
-# Don't include stuff already done in $(LIBS)
-# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
-# is "yes"), so compile examples after U-Boot is compiled.
-SUBDIR_TOOLS = tools
-SUBDIRS = $(SUBDIR_TOOLS)
-
-.PHONY : $(SUBDIRS) $(VERSION_FILE) $(TIMESTAMP_FILE)
-
-SUBDIR_EXAMPLES-y := examples
-SUBDIRS += $(SUBDIR_EXAMPLES-y)
+.PHONY : $(VERSION_FILE) $(TIMESTAMP_FILE)
#########################################################################
# U-Boot objects....order is important (i.e. start must be first)
@@ -605,70 +595,76 @@ head-y := $(CPUDIR)/start.o
head-$(CONFIG_4xx) += arch/powerpc/cpu/ppc4xx/resetvec.o
head-$(CONFIG_MPC85xx) += arch/powerpc/cpu/mpc85xx/resetvec.o
-OBJS := $(head-y)
-
HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
-LIBS-y += lib/
-LIBS-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
-LIBS-y += $(CPUDIR)/
+libs-y += lib/
+libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
+libs-y += $(CPUDIR)/
ifdef SOC
-LIBS-y += $(CPUDIR)/$(SOC)/
+libs-y += $(CPUDIR)/$(SOC)/
endif
-LIBS-$(CONFIG_IXP4XX_NPE) += drivers/net/npe/
-LIBS-$(CONFIG_OF_EMBED) += dts/
-LIBS-y += arch/$(ARCH)/lib/
-LIBS-y += fs/
-LIBS-y += net/
-LIBS-y += disk/
-LIBS-y += drivers/
-LIBS-y += drivers/dma/
-LIBS-y += drivers/gpio/
-LIBS-y += drivers/i2c/
-LIBS-y += drivers/input/
-LIBS-y += drivers/mmc/
-LIBS-y += drivers/mtd/
-LIBS-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
-LIBS-y += drivers/mtd/onenand/
-LIBS-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
-LIBS-y += drivers/mtd/spi/
-LIBS-y += drivers/net/
-LIBS-y += drivers/net/phy/
-LIBS-y += drivers/pci/
-LIBS-y += drivers/power/ \
+libs-$(CONFIG_IXP4XX_NPE) += drivers/net/npe/
+libs-$(CONFIG_OF_EMBED) += dts/
+libs-y += arch/$(ARCH)/lib/
+libs-y += fs/
+libs-y += net/
+libs-y += disk/
+libs-y += drivers/
+libs-y += drivers/dma/
+libs-y += drivers/gpio/
+libs-y += drivers/i2c/
+libs-y += drivers/input/
+libs-y += drivers/mmc/
+libs-y += drivers/mtd/
+libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
+libs-y += drivers/mtd/onenand/
+libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
+libs-y += drivers/mtd/spi/
+libs-y += drivers/net/
+libs-y += drivers/net/phy/
+libs-y += drivers/pci/
+libs-y += drivers/power/ \
drivers/power/fuel_gauge/ \
drivers/power/mfd/ \
drivers/power/pmic/ \
drivers/power/battery/
-LIBS-y += drivers/spi/
-LIBS-$(CONFIG_FMAN_ENET) += drivers/net/fm/
-LIBS-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
-LIBS-y += drivers/serial/
-LIBS-y += drivers/usb/eth/
-LIBS-y += drivers/usb/gadget/
-LIBS-y += drivers/usb/host/
-LIBS-y += drivers/usb/musb/
-LIBS-y += drivers/usb/musb-new/
-LIBS-y += drivers/usb/phy/
-LIBS-y += drivers/usb/ulpi/
-LIBS-y += common/
-LIBS-y += lib/libfdt/
-LIBS-$(CONFIG_API) += api/
-LIBS-$(CONFIG_HAS_POST) += post/
-LIBS-y += test/
+libs-y += drivers/spi/
+libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
+libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
+libs-y += drivers/serial/
+libs-y += drivers/usb/eth/
+libs-y += drivers/usb/gadget/
+libs-y += drivers/usb/host/
+libs-y += drivers/usb/musb/
+libs-y += drivers/usb/musb-new/
+libs-y += drivers/usb/phy/
+libs-y += drivers/usb/ulpi/
+libs-y += common/
+libs-y += lib/libfdt/
+libs-$(CONFIG_API) += api/
+libs-$(CONFIG_HAS_POST) += post/
+libs-y += test/
ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
-LIBS-y += arch/$(ARCH)/imx-common/
+libs-y += arch/$(ARCH)/imx-common/
endif
-LIBS-$(CONFIG_ARM) += arch/arm/cpu/
-LIBS-$(CONFIG_PPC) += arch/powerpc/cpu/
+libs-$(CONFIG_ARM) += arch/arm/cpu/
+libs-$(CONFIG_PPC) += arch/powerpc/cpu/
+
+libs-y += board/$(BOARDDIR)/
+
+libs-y := $(sort $(libs-y))
-LIBS-y += board/$(BOARDDIR)/
+u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
+
+u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
+
+libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
+
+u-boot-init := $(head-y)
+u-boot-main := $(libs-y)
-LIBS-y := $(patsubst %/, %/built-in.o, $(LIBS-y))
-LIBS := $(sort $(LIBS-y))
-.PHONY : $(LIBS)
# Add GCC lib
ifdef USE_PRIVATE_LIBGCC
@@ -738,7 +734,7 @@ ifneq ($(CONFIG_SYS_TEXT_BASE),)
LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
endif
-all: $(ALL-y) $(SUBDIR_EXAMPLES-y)
+all: $(ALL-y)
u-boot.dtb: checkdtc u-boot
$(MAKE) $(build)=dts binary
@@ -891,17 +887,17 @@ u-boot-img-spl-at-end.bin: spl/u-boot-spl.bin u-boot.img
ifeq ($(CONFIG_SANDBOX),y)
GEN_UBOOT = \
$(CC) $(SYMS) -T u-boot.lds \
- -Wl,--start-group $(LIBS) -Wl,--end-group \
+ -Wl,--start-group $(u-boot-main) -Wl,--end-group \
$(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot
else
GEN_UBOOT = \
$(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
- $(OBJS) \
- --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \
+ $(u-boot-init) \
+ --start-group $(u-boot-main) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
endif
-u-boot: depend $(SUBDIR_TOOLS) $(OBJS) $(LIBS) u-boot.lds
+u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds
$(GEN_UBOOT)
ifeq ($(CONFIG_KALLSYMS),y)
smap=`$(call SYSTEM_MAP,u-boot) | \
@@ -911,16 +907,27 @@ ifeq ($(CONFIG_KALLSYMS),y)
$(GEN_UBOOT) common/system_map.o
endif
-$(OBJS):
- @:
+# The actual objects are generated when descending,
+# make sure no implicit rule kicks in
+$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
-$(LIBS): depend $(SUBDIR_TOOLS) scripts_basic
- $(Q)$(MAKE) $(build)=$(patsubst %/,%,$(dir $@))
+# Handle descending into subdirectories listed in $(vmlinux-dirs)
+# Preset locale variables to speed up the build process. Limit locale
+# tweaks to this spot to avoid wrong language settings when running
+# make menuconfig etc.
+# Error messages still appears in the original language
-$(SUBDIRS): scripts_basic $(TIMESTAMP_FILE) $(VERSION_FILE)
- $(Q)$(MAKE) $(build)=$@
+PHONY += $(u-boot-dirs)
+$(u-boot-dirs): depend scripts_basic
+ $(Q)$(MAKE) $(build)=$@
+
+tools: $(TIMESTAMP_FILE) $(VERSION_FILE)
+# The "tools" are needed early
+$(filter-out tools, $(u-boot-dirs)): tools
+# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
+# is "yes"), so compile examples after U-Boot is compiled.
+examples: $(filter-out examples, $(u-boot-dirs))
-$(SUBDIR_EXAMPLES-y): u-boot
u-boot.lds: $(LDSCRIPT) depend
$(CPP) $(cpp_flags) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
@@ -931,10 +938,10 @@ nand_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend scripts_basic
u-boot-nand.bin: nand_spl u-boot.bin
cat nand_spl/u-boot-spl-16k.bin u-boot.bin > u-boot-nand.bin
-spl/u-boot-spl.bin: $(SUBDIR_TOOLS) depend scripts_basic
+spl/u-boot-spl.bin: tools depend scripts_basic
$(MAKE) obj=spl -f $(srctree)/spl/Makefile all
-tpl/u-boot-tpl.bin: $(SUBDIR_TOOLS) depend scripts_basic
+tpl/u-boot-tpl.bin: tools depend scripts_basic
$(MAKE) obj=tpl -f $(srctree)/spl/Makefile all CONFIG_TPL_BUILD=y
# Explicitly make _depend in subdirs containing multiple targets to prevent
@@ -943,9 +950,7 @@ depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) \
include/generated/generic-asm-offsets.h \
include/generated/asm-offsets.h
-TAG_SUBDIRS = $(SUBDIRS)
-TAG_SUBDIRS += $(dir $(LIBS))
-TAG_SUBDIRS += include
+TAG_SUBDIRS := $(u-boot-dirs) include
FIND := find
FINDFLAGS := -L
@@ -1126,7 +1131,7 @@ clobber: clean
@find $(OBJTREE) -type f \( -name '*.srec' \
-o -name '*.bin' -o -name u-boot.img \) \
-print0 | xargs -0 rm -f
- @rm -f $(OBJS) *.bak ctags etags TAGS \
+ @rm -f *.bak ctags etags TAGS \
cscope.* *.*~
@rm -f u-boot u-boot.map u-boot.hex $(ALL-y)
@rm -f u-boot.kwb
diff --git a/spl/Makefile b/spl/Makefile
index 55d6824..e5ab2f6 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -79,63 +79,62 @@ head-$(CONFIG_X86) += $(START_PATH)/start16.o $(START_PATH)/resetvec.o
head-$(CONFIG_4xx) += $(START_PATH)/resetvec.o
head-$(CONFIG_MPC85xx) += $(START_PATH)/resetvec.o
-LIBS-y += arch/$(ARCH)/lib/
+libs-y += arch/$(ARCH)/lib/
-LIBS-y += $(CPUDIR)/
+libs-y += $(CPUDIR)/
ifdef SOC
-LIBS-y += $(CPUDIR)/$(SOC)/
+libs-y += $(CPUDIR)/$(SOC)/
endif
-LIBS-y += board/$(BOARDDIR)/
-LIBS-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
-
-LIBS-$(CONFIG_SPL_FRAMEWORK) += common/spl/
-LIBS-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/
-LIBS-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
-LIBS-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/
-LIBS-$(CONFIG_SPL_GPIO_SUPPORT) += drivers/gpio/
-LIBS-$(CONFIG_SPL_MMC_SUPPORT) += drivers/mmc/
-LIBS-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += drivers/ddr/fsl/
-LIBS-$(CONFIG_SPL_SERIAL_SUPPORT) += drivers/serial/
-LIBS-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/
-LIBS-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/
-LIBS-y += fs/
-LIBS-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
-LIBS-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ \
+libs-y += board/$(BOARDDIR)/
+libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
+
+libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
+libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/
+libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
+libs-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/
+libs-$(CONFIG_SPL_GPIO_SUPPORT) += drivers/gpio/
+libs-$(CONFIG_SPL_MMC_SUPPORT) += drivers/mmc/
+libs-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += drivers/ddr/fsl/
+libs-$(CONFIG_SPL_SERIAL_SUPPORT) += drivers/serial/
+libs-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/
+libs-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/
+libs-y += fs/
+libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
+libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ \
drivers/power/pmic/
-LIBS-$(if $(CONFIG_CMD_NAND),$(CONFIG_SPL_NAND_SUPPORT)) += drivers/mtd/nand/
-LIBS-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/
-LIBS-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/
-LIBS-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
-LIBS-$(CONFIG_SPL_NET_SUPPORT) += net/
-LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/
-LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/
-LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/
-LIBS-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/
-LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/
-LIBS-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/
+libs-$(if $(CONFIG_CMD_NAND),$(CONFIG_SPL_NAND_SUPPORT)) += drivers/mtd/nand/
+libs-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/
+libs-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/
+libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
+libs-$(CONFIG_SPL_NET_SUPPORT) += net/
+libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/
+libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/
+libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/
+libs-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/
+libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/
+libs-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/
ifneq (,$(CONFIG_MX23)$(CONFIG_MX35)$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35))
-LIBS-y += arch/$(ARCH)/imx-common/
+libs-y += arch/$(ARCH)/imx-common/
endif
-LIBS-$(CONFIG_ARM) += arch/arm/cpu/
-LIBS-$(CONFIG_PPC) += arch/powerpc/cpu/
+libs-$(CONFIG_ARM) += arch/arm/cpu/
+libs-$(CONFIG_PPC) += arch/powerpc/cpu/
-LIBS-y := $(patsubst %/, %/built-in.o, $(LIBS-y))
+head-y := $(addprefix $(obj)/,$(head-y))
+libs-y := $(addprefix $(obj)/,$(libs-y))
+u-boot-spl-dirs := $(patsubst %/,%,$(filter %/, $(libs-y)))
+
+libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
# Add GCC lib
ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
PLATFORM_LIBS := $(SPLTREE)/arch/$(ARCH)/lib/lib.a
endif
-LIBS-y := $(sort $(LIBS-y))
-
-__START := $(head-y)
-__LIBS := $(LIBS-y)
-
-START := $(addprefix $(obj)/,$(head-y))
-LIBS := $(addprefix $(obj)/,$(LIBS-y))
+u-boot-spl-init := $(head-y)
+u-boot-spl-main := $(libs-y)
# Linker Script
ifdef CONFIG_SPL_LDSCRIPT
@@ -200,22 +199,27 @@ ifneq ($(CONFIG_SPL_TEXT_BASE),)
LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE)
endif
-GEN_UBOOT = \
- cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $(__START) \
- --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
- -Map $(SPL_BIN).map -o $(SPL_BIN)
+quiet_cmd_u-boot-spl = LD $@
+ cmd_u-boot-spl = cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
+ $(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \
+ $(patsubst $(obj)/%,%,$(u-boot-spl-main)) --end-group \
+ $(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN)
-$(obj)/$(SPL_BIN): $(START) $(LIBS) $(obj)/u-boot-spl.lds
- $(GEN_UBOOT)
+$(obj)/$(SPL_BIN): $(u-boot-spl-init) $(u-boot-spl-main) $(obj)/u-boot-spl.lds
+ $(call cmd,u-boot-spl)
-$(START):
- @:
+$(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ;
-$(LIBS):
- $(Q)$(MAKE) $(build)=$(patsubst %/,%,$(dir $@))
+PHONY += $(u-boot-spl-dirs)
+$(u-boot-spl-dirs):
+ $(Q)$(MAKE) $(build)=$@
# FIX ME
cpp_flags := $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(UBOOTINCLUDE) $(NOSTDINC_FLAGS)
$(obj)/u-boot-spl.lds: $(LDSCRIPT)
$(CPP) $(cpp_flags) $(LDPPFLAGS) -I$(obj). -ansi -D__ASSEMBLY__ -P - < $< > $@
+
+# Declare the contents of the .PHONY variable as phony. We keep that
+# information in a variable se we can use it in if_changed and friends.
+.PHONY: $(PHONY)
--
1.8.3.2
More information about the U-Boot
mailing list