[U-Boot] [PATCH v3 8/8] ARM: mx6: Allow enablement of FEC Anatop based clock for all MX6
Otavio Salvador
otavio at ossystems.com.br
Mon Dec 16 23:44:05 CET 2013
The enable_fec_anatop_clock method should be available for all MX6
variant as it is not MX6 SoloLite specific. This moves the code out of
the #ifdef/#endif and we make it conditional to CONFIG_FEC_MXC
instead.
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
---
Changes in v3:
- new patch
Changes in v2: None
arch/arm/cpu/armv7/mx6/clock.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index 873d9d0..d87e73b 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -310,7 +310,18 @@ static u32 get_mmdc_ch0_clk(void)
return freq / (podf + 1);
}
+#else
+static u32 get_mmdc_ch0_clk(void)
+{
+ u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
+ u32 mmdc_ch0_podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK) >>
+ MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET;
+
+ return get_periph_clk() / (mmdc_ch0_podf + 1);
+}
+#endif
+#ifdef CONFIG_FEC_MXC
int enable_fec_anatop_clock(void)
{
u32 reg = 0;
@@ -339,16 +350,6 @@ int enable_fec_anatop_clock(void)
return 0;
}
-
-#else
-static u32 get_mmdc_ch0_clk(void)
-{
- u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
- u32 mmdc_ch0_podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK) >>
- MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET;
-
- return get_periph_clk() / (mmdc_ch0_podf + 1);
-}
#endif
static u32 get_usdhc_clk(u32 port)
--
1.8.4.3
More information about the U-Boot
mailing list