[U-Boot] i2c: samsung: register i2c busses for Exynso5420 and Exynos5250
Heiko Schocher
hs at denx.de
Thu Dec 5 13:47:42 CET 2013
Hello Naveen,
Am 05.12.2013 13:21, schrieb Naveen Krishna Ch:
> Hello Heiko,
>
> On 5 December 2013 16:56, Heiko Schocher<hs at denx.de> wrote:
>> Hello Naveen,
>>
>> Sorry for the late reply ...
>>
>> Am 25.11.2013 12:28, schrieb Naveen Krishna Ch:
>>
>>> This patch adds the U_BOOT_I2C_ADAP_COMPLETE defines for channels
>>> on Exynos5420 and Exynos5250 and also adds support for init function
>>> for hsi2c channels
>>>
>>> Signed-off-by: Naveen Krishna Chatradhi<ch.naveen at samsung.com>
>>>
>>> ---
>>> README | 6 ++
>>> drivers/i2c/s3c24x0_i2c.c | 222
>>> +++++++++++++++++++++++++++++++++++----------
>>> 2 files changed, 180 insertions(+), 48 deletions(-)
>>>
>>> diff --git a/README b/README
>>> index c97ff0a..c04e352 100644
>>> --- a/README
>>> +++ b/README
>>> @@ -2076,6 +2076,12 @@ CBFS (Coreboot Filesystem) support
>>> - set CONFIG_SYS_I2C_ZYNQ_SPEED for speed setting
>>> - set CONFIG_SYS_I2C_ZYNQ_SLAVE for slave addr
>>>
>>> + - drivers/i2c/s3c24x0_i2c.c:
>>> + - activate this driver with CONFIG_SYS_I2C_S3C24X0
>>> + - This driver adds i2c buses (11 for Exynos5250,
>>> Exynos5420
>>> + 9 i2c buses for Exynos4 and 1 for S3C24X0 SoCs from
>>> Samsung)
>>> + with a fix speed from 100000 and the slave addr 0!
>>> +
>>> additional defines:
>>>
>>> CONFIG_SYS_NUM_I2C_BUSES
>>> diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
>>> index 1e9dba0..6e719ec 100644
>>> --- a/drivers/i2c/s3c24x0_i2c.c
>>> +++ b/drivers/i2c/s3c24x0_i2c.c
>>> @@ -721,6 +721,15 @@ static unsigned int s3c24x0_i2c_set_bus_speed(struct
>>> i2c_adapter *adap,
>>> return 0;
>>> }
>>>
>>> +static void exynos_i2c_init(struct i2c_adapter *adap, int speed, int
>>> slaveaddr)
>>> +{
>>> + /* This will override the speed selected in the fdt for that port
>>> */
>>> + debug("i2c_init(speed=%u, slaveaddr=0x%x)\n", speed, slaveaddr);
>>> + if (i2c_set_bus_speed(speed))
>>> + printf("i2c_init: failed to init bus %d for speed = %d\n",
>>> + adap->hwadapnr, speed);
>>> +}
> This init is not used for Exynos4 and lower series SoCs
>>> +
>>> /*
>>> * cmd_type is 0 for write, 1 for read.
>>> *
>>> @@ -1071,51 +1080,168 @@ int i2c_reset_port_fdt(const void *blob, int
>>> node)
>>> /*
>>> * Register s3c24x0 i2c adapters
>>> */
>>> -U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_0, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> - s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> - s3c24x0_i2c_set_bus_speed,
>>> - CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> - CONFIG_SYS_I2C_S3C24X0_SLAVE,
>>> - 0)
>>> -U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_1, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> - s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> - s3c24x0_i2c_set_bus_speed,
>>> - CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> - CONFIG_SYS_I2C_S3C24X0_SLAVE,
>>> - 1)
>>> -U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_2, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> - s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> - s3c24x0_i2c_set_bus_speed,
>>> - CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> - CONFIG_SYS_I2C_S3C24X0_SLAVE,
>>> - 2)
>>> -U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_3, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> - s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> - s3c24x0_i2c_set_bus_speed,
>>> - CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> - CONFIG_SYS_I2C_S3C24X0_SLAVE,
>>> - 3)
>>> -U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_4, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> - s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> - s3c24x0_i2c_set_bus_speed,
>>> - CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> - CONFIG_SYS_I2C_S3C24X0_SLAVE,
>>> - 4)
>>> -U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_5, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> - s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> - s3c24x0_i2c_set_bus_speed,
>>> - CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> - CONFIG_SYS_I2C_S3C24X0_SLAVE,
>>> - 5)
>>> -U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_6, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> - s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> - s3c24x0_i2c_set_bus_speed,
>>> - CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> - CONFIG_SYS_I2C_S3C24X0_SLAVE,
>>> - 6)
>>> -U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_7, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> - s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> - s3c24x0_i2c_set_bus_speed,
>>> - CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> - CONFIG_SYS_I2C_S3C24X0_SLAVE,
>>> - 7)
>>> +#if defined(CONFIG_EXYNOS5420)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c00, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 0)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c01, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 1)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c02, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 2)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c03, exynos_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 3)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c04, exynos_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 4)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c05, exynos_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 5)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c06, exynos_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 6)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c07, exynos_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 7)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c08, exynos_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 8)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c09, exynos_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 9)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c10, exynos_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 10)
>>> +#elif defined(CONFIG_EXYNOS5250)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c00, exynos_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 0)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c01, exynos_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 1)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c02, exynos_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 2)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c03, exynos_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 3)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c04, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 4)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c05, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 5)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c06, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 6)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c07, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 7)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c08, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 8)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c09, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 9)
>>> +U_BOOT_I2C_ADAP_COMPLETE(s3c10, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 10)
>>> +#elif defined(CONFIG_EXYNOS4)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c00, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 0)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c01, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 1)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c02, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 2)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c03, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 3)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c04, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 4)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c05, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 5)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c06, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 6)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c07, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 7)
>>> +U_BOOT_I2C_ADAP_COMPLETE(i2c08, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>>> + s3c24x0_i2c_read, s3c24x0_i2c_write,
>>> + s3c24x0_i2c_set_bus_speed,
>>> + CONFIG_SYS_I2C_S3C24X0_SPEED,
>>> + CONFIG_SYS_I2C_S3C24X0_SLAVE, 8
>>
>> ^
>> leads in a compile error for trats and trats2, could you please fix?
> I ran "MAKEALL -v samsung"
> s3c24x0_i2c.c:724:13: warning: 'exynos_i2c_init' defined but not used
> [-Wunused-function]
> is the warning seen for trats and trats2 boards
> If you are talking about this one, will fix it in the next versio.
No, there is a missing ")" at the end!
pollux:u-boot hs [master] $ ./MAKEALL trats
Configuring for trats board...
s3c24x0_i2c.c:1247:0: error: unterminated argument list invoking macro "U_BOOT_I2C_ADAP_COMPLETE"
s3c24x0_i2c.c:1236:1: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input
arm-linux-gnueabi-size: './u-boot': No such file
s3c24x0_i2c.c:1247:0: error: unterminated argument list invoking macro "U_BOOT_I2C_ADAP_COMPLETE"
s3c24x0_i2c.c:1236:1: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input
s3c24x0_i2c.c:724:13: warning: 'exynos_i2c_init' defined but not used [-Wunused-function]
make[1]: *** [s3c24x0_i2c.o] Fehler 1
make[1]: *** Warte auf noch nicht beendete Prozesse...
make: *** [drivers/i2c/built-in.o] Fehler 2
make: *** Warte auf noch nicht beendete Prozesse...
--------------------- SUMMARY ----------------------------
Boards compiled: 1
Boards with errors: 1 ( trats )
----------------------------------------------------------
pollux:u-boot hs [master] $
pollux:u-boot hs [(kein Zweig, Neuaufbau begonnen bei master)] $ git bisect log
git bisect start
# bad: [f5f40408ce3b00637c652fdabfb6f3c4e0d09635] arm: omap: i2c: don't zero cnt in i2c_write
git bisect bad f5f40408ce3b00637c652fdabfb6f3c4e0d09635
# good: [f44483b57c49282299da0e5c10073b909cdad979] Merge branch 'serial' of git://git.denx.de/u-boot-microblaze
git bisect good f44483b57c49282299da0e5c10073b909cdad979
# bad: [4d06a7c5707f813f4bc7fd7a9d700606c63fa4de] i2c: fti2c010: cosmetic: coding style cleanup
git bisect bad 4d06a7c5707f813f4bc7fd7a9d700606c63fa4de
# good: [a6756bbdac43474193472b43309626e2c28d8100] driver:i2c:s3c24x0: fix clock init for hsi2c
git bisect good a6756bbdac43474193472b43309626e2c28d8100
# bad: [c3b6bba20862ff6476c99aa6d3168f7097a5b4b2] i2c: samsung: register i2c busses for Exynso5420 and Exynos5250
git bisect bad c3b6bba20862ff6476c99aa6d3168f7097a5b4b2
# first bad commit: [c3b6bba20862ff6476c99aa6d3168f7097a5b4b2] i2c: samsung: register i2c busses for Exynso5420 and Exynos5250
pollux:u-boot hs [(kein Zweig, Neuaufbau begonnen bei master)] $
>>
>> Hmm... could you reformat this very long list in something like this:
>>
>> U_BOOT_I2C_ADAP_COMPLETE(s3c0, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>> if defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5420) ||
>> defined(CONFIG_EXYNOS5420)
>> U_BOOT_I2C_ADAP_COMPLETE(s3c1, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>> [...]
>> U_BOOT_I2C_ADAP_COMPLETE(s3c8, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>> #endif
>> if defined(CONFIG_EXYNOS5420) || defined(CONFIG_EXYNOS5420)
>> U_BOOT_I2C_ADAP_COMPLETE(s3c9, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>> U_BOOT_I2C_ADAP_COMPLETE(s3c10, s3c24x0_i2c_init, s3c24x0_i2c_probe,
>> #endif
> Basically, s3c24x0_i2c.c now support both HighSpeed I2C modules and Standard I2C
> Modules. They have different init functions.
> Exynos5250/5260 has 4 hsi2c channels hsi2c 0 ~ 3 and 7 i2c channels 4 ~ 10
> Exynos5420 has 4 i2c channels i2c 0 ~ 3 and 7 hsi2c channels 4 ~ 10
> Exynos4 has 9 i2c channels
> Hence, the long list. It would be helpful if anyone can suggest a way
> to reduce this list.
Ah, now I see it, thanks!
Maybe we can define one s3c24x0_i2c_init function, and call from there
the SoC / adapater specific init func? So we can prevent this long list?
> Is U_BOOT_I2C_ADAP_COMPLETE is the only (best) way to register to new i2c
> framework ?
Yes.
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
More information about the U-Boot
mailing list