[U-Boot] [UBOOT][PATCH 0/5] qspi: Add AM437x support

Jagan Teki jagannadh.teki at gmail.com
Thu Dec 19 09:51:06 CET 2013


On Thu, Dec 19, 2013 at 2:17 PM, Sourav Poddar <sourav.poddar at ti.com> wrote:
> On Thursday 19 December 2013 12:49 PM, Jagan Teki wrote:
>>
>> On Thu, Dec 19, 2013 at 12:37 PM, Sourav Poddar<sourav.poddar at ti.com>
>> wrote:
>>>
>>> On Thursday 19 December 2013 12:24 PM, Jagan Teki wrote:
>>>>
>>>> On Mon, Nov 25, 2013 at 4:28 PM, Sourav Poddar<sourav.poddar at ti.com>
>>>> wrote:
>>>>>
>>>>> Hi Jagan,
>>>>>
>>>>> On Thursday 14 November 2013 09:09 PM, Sourav Poddar wrote:
>>>>>>
>>>>>> The patch series add support for enabling qspi
>>>>>> on AM43xx at uboot.
>>>>>>
>>>>>> Testing done:
>>>>>> -------------
>>>>>> Wrote a uImage to the flash, read it back and boot the
>>>>>> kernel.
>>>>>>
>>>>>> Jagannadha Sutradharudu Teki (1):
>>>>>>      sf: macronix: Add support for MX25L51235F
>>>>>>
>>>>>> Sourav Poddar (4):
>>>>>>      am43xx: add qspi support
>>>>>>      am437x_epos_evm: add SPL API, QSPI, and serial flash support
>>>>>>      qspi/spi: Add AM43xx specifics changes
>>>>>>      am43xx: add delay before xfer
>>>>>>
>>>>>>     arch/arm/cpu/armv7/am33xx/clock_am43xx.c |    1 +
>>>>>>     arch/arm/include/asm/arch-am33xx/cpu.h   |    4 +++-
>>>>>>     arch/arm/include/asm/arch-am33xx/omap.h  |    1 +
>>>>>>     board/ti/am43xx/mux.c                    |   11 +++++++++++
>>>>>>     drivers/mtd/spi/sf_probe.c               |    2 ++
>>>>>>     drivers/spi/ti_qspi.c                    |   29
>>>>>> ++++++++++++++++++++++++++---
>>>>>>     include/configs/am43xx_evm.h             |   20
>>>>>> ++++++++++++++++++++
>>>>>>     7 files changed, 64 insertions(+), 4 deletions(-)
>>>>>>
>>>>> If these patches seems fine to you, can these be picked?
>>>>
>>>> Please send the next version patches - fix the comments as we discussed
>>>> so
>>>> far.
>>>>
>>> I will send the next version.
>>> But, what about the delay patch, I tried other stuffs but could not see
>>> any
>>> thing
>>> that helps.
>>> So,  I will send the delay patch also as of now, to make it work out of
>>> mainline.
>>
>> I am some how OK with that as that change is in ur driver..
>>
>> Just try this change
>> /* FIXME: comments here... */
>> +#ifdef CONFIG_AM43XX
>> + udelay(100);
>> +#endif
>>
>> And also write the bug log on commit message(means with out delay)
>>
>> Try to ass the testing logs on doc/ - for each time you tested a new
>> flash or new driver.
>>
> Jagan,
>
> Just realised that this patches depends on AM43x base patches which are in
> ti-uboot mainline tree. So, what should I do in that case. ?

Send all of them together..!

-- 
Thanks,
Jagan.
--------
Jagannadha Sutradharudu Teki,
E: jagannadh.teki at gmail.com, P: +91-9676773388
Engineer - System Software Hacker
U-boot - SPI Custodian and Zynq APSOC
Ln: http://www.linkedin.com/in/jaganteki


More information about the U-Boot mailing list