[U-Boot] changing bootcmd environment
Scott Wood
scottwood at freescale.com
Wed Feb 6 19:35:25 CET 2013
On 02/05/2013 10:25:41 PM, Ratheendran R wrote:
> Thanks Scott for your valuable feedback & suggestion.
>
> I am using the board which is uses SD Card boot & NAND boot
> options,SD CARD
> boot is used to write firmware to be NAND flash and used only to
> update
> the firmware to NAND.
Every time you boot?
And you should never use "nand scrub" in an automated way.
-Scott
More information about the U-Boot
mailing list