[U-Boot] changing bootcmd environment

[Ratheendran R]

Thanks Scott

SD Card boot only to write firmware to NAND flash.

*'And you should never use "nand scrub" in an automated way.'
*
what is better way of doing this, since I am using with an old uboot..

-Ratheendran

On Thu, Feb 7, 2013 at 12:05 AM, Scott Wood <scottwood at freescale.com> wrote:

> On 02/05/2013 10:25:41 PM, Ratheendran R wrote:
>
>> Thanks Scott for your valuable feedback & suggestion.
>>
>> I am using the board which is uses SD Card boot & NAND boot options,SD
>> CARD
>> boot is used to write firmware to be  NAND flash and used only to update
>> the firmware to NAND.
>>
>
> Every time you boot?
>
> And you should never use "nand scrub" in an automated way.
>
> -Scott
>