[U-Boot] [PATCH v2 1/2] Tegra: fdt: Add/enhance sdhci (mmc) nodes for all T20 DT files

[Lucas Stach]

Hi Tom,

Am Montag, den 11.02.2013, 10:17 -0700 schrieb Tom Warren:
> Linux dts files were used for those boards that didn't already
> have sdhci info populated. Tamonten has their own dtsi file with
> common sdhci nodes (sourced from Linux).
> 
> Signed-off-by: Tom Warren <twarren at nvidia.com>
> ---
> v2:
> - cleanup comments in dts files/match w/kernel files
> - add sdhci aliases in all dts files
> - use tegra20-tamonten.dtsi from the kernel for AD boards
> 
>  arch/arm/dts/tegra20-tamonten.dtsi               |  489 ++++++++++++++++++++++

I'm not sure if pushing the whole file in this patch is the right thing
to do.

>  arch/arm/dts/tegra20.dtsi                        |   16 +-
>  board/avionic-design/dts/tegra20-medcom-wide.dts |    1 +
>  board/avionic-design/dts/tegra20-plutux.dts      |    1 +
>  board/avionic-design/dts/tegra20-tec.dts         |    1 +
>  board/compal/dts/tegra20-paz00.dts               |   19 +-
>  board/compulab/dts/tegra20-trimslice.dts         |   14 +
>  board/nvidia/dts/tegra20-harmony.dts             |   18 +
>  board/nvidia/dts/tegra20-seaboard.dts            |   12 +-
>  board/nvidia/dts/tegra20-ventana.dts             |   15 +
>  board/nvidia/dts/tegra20-whistler.dts            |   13 +
>  board/toradex/dts/tegra20-colibri_t20_iris.dts   |    6 +
>  12 files changed, 595 insertions(+), 10 deletions(-)
>  create mode 100644 arch/arm/dts/tegra20-tamonten.dtsi
> 
[...]
> diff --git a/board/toradex/dts/tegra20-colibri_t20_iris.dts b/board/toradex/dts/tegra20-colibri_t20_iris.dts
> index c29b43a..0dd4c43 100644
> --- a/board/toradex/dts/tegra20-colibri_t20_iris.dts
> +++ b/board/toradex/dts/tegra20-colibri_t20_iris.dts
> @@ -10,6 +10,7 @@
>  		usb0 = "/usb at c5008000";
>  		usb1 = "/usb at c5000000";
>  		usb2 = "/usb at c5004000";
> +		sdhci0 = "/sdhci at c8000600";
>  	};
>  
>  	usb at c5000000 {
> @@ -35,4 +36,9 @@
>  			compatible = "nand-flash";
>  		};
>  	};
> +
> +	sdhci at c8000600 {
> +		status = "okay";
> +		bus-width = <4>;
You are missing the CD GPIO here. It's PC7.

> +	};
>  };

Regards,
Lucas