[U-Boot] [PATCH v7 15/19] nand: mxc: Switch NAND SPL to generic SPL

Fabio Estevam festevam at gmail.com
Fri Feb 22 23:08:14 CET 2013


On Fri, Feb 22, 2013 at 7:03 PM, Fabio Estevam <festevam at gmail.com> wrote:
> On Fri, Feb 22, 2013 at 7:02 PM, Fabio Estevam <festevam at gmail.com> wrote:
>
>> U-Boot code: 87F00000 -> 87F2C184  BSS: -> 87F311B4
>> CPU:   Freescale i.MX31 rev 2.0 at 532 MHz.
>> Reset cause: WDOG
>> Board: MX31PDK
>> monitor len: 000311B4
>> ramsize: 08000000
>> TLB table from 87ff0000 to 87ff4000
>> Top of RAM usable for U-Boot at: 87ff0000
>> Reserving 196k for U-Boot at: 87fbe000
>> Reserving 640k for malloc() at: 87f1e000
>> Reserving 32 Bytes for Board Info at: 87f1dfe0
>> Reserving 128 Bytes for Global Data at: 87f1df60
>> New Stack Pointer is: 87f1df50
>> RAM Configuration:
>> Bank #0: 80000000 128 MiB
>> relocation Offset is: 000be000
>> monitor flash len: 00030F7C
>> Now running in RAM - U-Boot at: 87fbe000
>> NAND:  256 MiB
>
> and after this it does not hang, it keeps resetting forever.

I disabled watchdog and now I can reach U-boot prompt :-)  Thanks
Benoit and Troy!

Will fix the watchdog later.


More information about the U-Boot mailing list