[U-Boot] [PATCH V0 1/1] Resolve i2c compilation error for non-FDT case
Minkyu Kang
mk7.kang at samsung.com
Tue Jul 9 15:20:45 CEST 2013
Dear amar_g
On 09/07/13 21:44, amar_g wrote:
Please add prefix at title.
> This patch resolves the below mentiond compilation error of i2c driver
typo. -> mentiond
> for non-FDT case.
>
> Compilation error:
> s3c24x0_i2c.c: In function 'board_i2c_init':
> s3c24x0_i2c.c:544:18: error: 'CONFIG_MAX_I2C_NUM' undeclared (first use
> in this function) s3c24x0_i2c.c:544:18: note: each undeclared
> identifier is reported only once for each function it appears in
> s3c24x0_i2c.c:545:3: warning: implicit declaration of function
> 'exynos_pinmux_config' [-Wimplicit-function-declaration]
> s3c24x0_i2c.c:545:25: error: 'PERIPH_ID_I2C0' undeclared (first use in
> this function) s3c24x0_i2c.c:546:10: error: 'PINMUX_FLAG_NONE'
> undeclared (first use in this function) make[1]: ***
> [/home/albert/src/u-boot-arm/build/VCMA9/drivers/i2c/s3c24x0_i2c.o]
> Error 1 make: ***
> [/home/albert/src/u-boot-arm/build/VCMA9/drivers/i2c/libi2c.o] Error 2
>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
> Signed-off-by: Amar <amarendra.xt at samsung.com>
> ---
> board/samsung/smdk5250/smdk5250.c | 9 +++++++++
> drivers/i2c/s3c24x0_i2c.c | 9 +--------
> 2 files changed, 10 insertions(+), 8 deletions(-)
>
> diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
> index ae1f077..262398f 100644
> --- a/board/samsung/smdk5250/smdk5250.c
> +++ b/board/samsung/smdk5250/smdk5250.c
> @@ -332,6 +332,15 @@ static int board_uart_init(void)
> return ret;
> }
>
> +void board_i2c_init(const void *blob)
> +{
> + int i;
please add blank line here.
> + for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) {
> + exynos_pinmux_config((PERIPH_ID_I2C0 + i),
> + PINMUX_FLAG_NONE);
> + }
> +}
> +
This is for non-fdt case, right?
> #ifdef CONFIG_BOARD_EARLY_INIT_F
> int board_early_init_f(void)
> {
> diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
> index 3fc1c5b..382e4c2 100644
> --- a/drivers/i2c/s3c24x0_i2c.c
> +++ b/drivers/i2c/s3c24x0_i2c.c
> @@ -515,10 +515,10 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
> len) != 0);
> }
>
> +#ifdef CONFIG_OF_CONTROL
> void board_i2c_init(const void *blob)
> {
> int i;
> -#ifdef CONFIG_OF_CONTROL
> int node_list[CONFIG_MAX_I2C_NUM];
> int count;
>
> @@ -540,15 +540,8 @@ void board_i2c_init(const void *blob)
> bus->bus_num = i2c_busses++;
> exynos_pinmux_config(bus->id, 0);
> }
> -#else
> - for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) {
> - exynos_pinmux_config((PERIPH_ID_I2C0 + i),
> - PINMUX_FLAG_NONE);
> - }
> -#endif
> }
>
> -#ifdef CONFIG_OF_CONTROL
> static struct s3c24x0_i2c_bus *get_bus(unsigned int bus_idx)
> {
> if (bus_idx < i2c_busses)
>
Thanks,
Minkyu Kang.
More information about the U-Boot
mailing list