[U-Boot] [PATCH V0 1/1] Resolve i2c compilation error for non-FDT case
Amarendra Reddy
amar.lavanuru at gmail.com
Tue Jul 9 15:34:58 CEST 2013
Dear Minkyu,
Please find my responses below.
Thanks & Regards
Amarendra Reddy
On 9 July 2013 18:50, Minkyu Kang <mk7.kang at samsung.com> wrote:
> Dear amar_g
>
> On 09/07/13 21:44, amar_g wrote:
>
> Please add prefix at title.
>
> OK shall add aprefix 'EXYNOS' at title in the next patch.
> > This patch resolves the below mentiond compilation error of i2c driver
>
> typo. -> mentiond
>
> OK shall remove the '.' form "for non-FDT case."
> > for non-FDT case.
> >
> > Compilation error:
> > s3c24x0_i2c.c: In function 'board_i2c_init':
> > s3c24x0_i2c.c:544:18: error: 'CONFIG_MAX_I2C_NUM' undeclared (first use
> > in this function) s3c24x0_i2c.c:544:18: note: each undeclared
> > identifier is reported only once for each function it appears in
> > s3c24x0_i2c.c:545:3: warning: implicit declaration of function
> > 'exynos_pinmux_config' [-Wimplicit-function-declaration]
> > s3c24x0_i2c.c:545:25: error: 'PERIPH_ID_I2C0' undeclared (first use in
> > this function) s3c24x0_i2c.c:546:10: error: 'PINMUX_FLAG_NONE'
> > undeclared (first use in this function) make[1]: ***
> > [/home/albert/src/u-boot-arm/build/VCMA9/drivers/i2c/s3c24x0_i2c.o]
> > Error 1 make: ***
> > [/home/albert/src/u-boot-arm/build/VCMA9/drivers/i2c/libi2c.o] Error 2
> >
> > Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
> > Signed-off-by: Amar <amarendra.xt at samsung.com>
> > ---
> > board/samsung/smdk5250/smdk5250.c | 9 +++++++++
> > drivers/i2c/s3c24x0_i2c.c | 9 +--------
> > 2 files changed, 10 insertions(+), 8 deletions(-)
> >
> > diff --git a/board/samsung/smdk5250/smdk5250.c
> b/board/samsung/smdk5250/smdk5250.c
> > index ae1f077..262398f 100644
> > --- a/board/samsung/smdk5250/smdk5250.c
> > +++ b/board/samsung/smdk5250/smdk5250.c
> > @@ -332,6 +332,15 @@ static int board_uart_init(void)
> > return ret;
> > }
> >
> > +void board_i2c_init(const void *blob)
> > +{
> > + int i;
>
> please add blank line here.
>
Ok shall add a new line here.
> > + for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) {
> > + exynos_pinmux_config((PERIPH_ID_I2C0 + i),
> > + PINMUX_FLAG_NONE);
> > + }
> > +}
> > +
>
> This is for non-fdt case, right?
Yes, it is for non-fdt case.
>
> > #ifdef CONFIG_BOARD_EARLY_INIT_F
> > int board_early_init_f(void)
> > {
> > diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
> > index 3fc1c5b..382e4c2 100644
> > --- a/drivers/i2c/s3c24x0_i2c.c
> > +++ b/drivers/i2c/s3c24x0_i2c.c
> > @@ -515,10 +515,10 @@ int i2c_write(uchar chip, uint addr, int alen,
> uchar *buffer, int len)
> > len) != 0);
> > }
> >
> > +#ifdef CONFIG_OF_CONTROL
> > void board_i2c_init(const void *blob)
> > {
> > int i;
> > -#ifdef CONFIG_OF_CONTROL
> > int node_list[CONFIG_MAX_I2C_NUM];
> > int count;
> >
> > @@ -540,15 +540,8 @@ void board_i2c_init(const void *blob)
> > bus->bus_num = i2c_busses++;
> > exynos_pinmux_config(bus->id, 0);
> > }
> > -#else
> > - for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) {
> > - exynos_pinmux_config((PERIPH_ID_I2C0 + i),
> > - PINMUX_FLAG_NONE);
> > - }
> > -#endif
> > }
> >
> > -#ifdef CONFIG_OF_CONTROL
> > static struct s3c24x0_i2c_bus *get_bus(unsigned int bus_idx)
> > {
> > if (bus_idx < i2c_busses)
> >
>
> Thanks,
> Minkyu Kang.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
More information about the U-Boot
mailing list