[U-Boot] [PATCH] mx28evk: Convert to phylib framework

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

mx28evk has a LAN8270 ethernet phy and we can use the phylib framework.

One of the advantages of converting to phylib is that we no longer see a timeout
prior to the first transfer in the 'tftp' command.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
After applying this patch I get:

U-Boot 2013.04-11810-gd6d75ec-dirty (Jul 12 2013 - 01:15:03)                    
                                                                                
CPU:   Freescale i.MX28 rev1.2 at 454 MHz                                       
BOOT:  SSP SD/MMC #0, 3V3                                                       
DRAM:  128 MiB                               
MMC:   MXS MMC: 0                                                               
Video: MXSFB: 'videomode' variable not set!                                     
In:    serial                                                                   
Out:   serial                                                                   
Err:   serial                                                                   
Net:   Phy not found 

I still get this 'Phy not found' message, but I think this is not related to the
board code. 

 board/freescale/mx28evk/mx28evk.c | 15 +--------------
 include/configs/mx28evk.h         |  3 ++-
 2 files changed, 3 insertions(+), 15 deletions(-)

diff --git a/board/freescale/mx28evk/mx28evk.c b/board/freescale/mx28evk/mx28evk.c
index 4edd9f4..cd81d58 100644
--- a/board/freescale/mx28evk/mx28evk.c
+++ b/board/freescale/mx28evk/mx28evk.c
@@ -110,7 +110,6 @@ int board_eth_init(bd_t *bis)
 {
 	struct mxs_clkctrl_regs *clkctrl_regs =
 		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
-	struct eth_device *dev;
 	int ret;
 
 	ret = cpu_eth_init(bis);
@@ -133,24 +132,12 @@ int board_eth_init(bd_t *bis)
 		return ret;
 	}
 
-	ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE);
+	ret = fecmxc_initialize_multi(bis, 1, 1, MXS_ENET1_BASE);
 	if (ret) {
 		puts("FEC MXS: Unable to init FEC1\n");
 		return ret;
 	}
 
-	dev = eth_get_dev_by_name("FEC0");
-	if (!dev) {
-		puts("FEC MXS: Unable to get FEC0 device entry\n");
-		return -EINVAL;
-	}
-
-	dev = eth_get_dev_by_name("FEC1");
-	if (!dev) {
-		puts("FEC MXS: Unable to get FEC1 device entry\n");
-		return -EINVAL;
-	}
-
 	return ret;
 }
 
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index de69182..2431b83 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -170,12 +170,13 @@
 
 /* Ethernet on SOC (FEC) */
 #ifdef	CONFIG_CMD_NET
-#define CONFIG_NET_MULTI
 #define CONFIG_ETHPRIME	"FEC0"
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define CONFIG_FEC_XCV_TYPE	RMII
 #define CONFIG_MX28_FEC_MAC_IN_OCOTP
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_SMSC
 #endif
 
 /* RTC */
-- 
1.8.1.2