[U-Boot] U-boot timeout with KSZ8021 phy

[Alexandre Pereira da Silva]

On Fri, Jul 12, 2013 at 1:06 AM, Marek Vasut <marex at denx.de> wrote:
> Dear Alexandre Pereira da Silva,
>
>> On Thu, Jul 11, 2013 at 5:36 PM, Marek Vasut <marex at denx.de> wrote:
>> > Dear Alexandre Pereira da Silva,
>> >
>> >> On Thu, Jul 11, 2013 at 4:55 PM, Marek Vasut <marex at denx.de> wrote:
>> > Make sure to check the direction too, it can go either from phy to fec or
>> > the other way IIRC.
>>
>> Ok, it seems this was caused by a bad tftp server and not by the board
>> itself.
>>
>> I can confirm KSZ8021 is functional, after defining CONFIG_PHYLIB to
>> mx28evk.h
>
> OK, good to hear! Btw. the MX28EVK uses LAN8720 PHY, it is the M28EVK that uses
> the Micrel PHY.
>
> btw. I suspect you should really split away your platform into separate space
> instead of hacking around various boards ;-)

Yes, I will do that, but the first priority was to get it working :-)

Thanks for your help solving this issue.