[U-Boot] [PATCH v4 6/8] am335x_evm: Add support for the NOR module on the memory cape
Tom Rini
trini at ti.com
Thu Jul 18 21:13:03 CEST 2013
From: Steve Kipisz <s-kipisz2 at ti.com>
This patch adds support for the NOR module that attaches
to the memory cape for a Beaglebone board. This does not
add booting support; only support so that you can boot from
SD/MMC and see the NOR module so that it can be programmed.
Signed-off-by: Steve Kipisz <s-kipisz2 at ti.com>
[trini: Clean up config changes slightly]
Signed-off-by: Tom Rini <trini at ti.com>
---
Changes in v4:
- Split clearing of gpmc_cfg->irqstatus/irqenable into a separate patch
Changes in v3:
- Reword comment in <asm/arch-am33xx/mem.h> to explain why STNOR values
belong in here.
Changes in v2:
- Move GPMC config portion into board.c
Signed-off-by: Tom Rini <trini at ti.com>
---
arch/arm/cpu/armv7/am33xx/mem.c | 4 +++
arch/arm/include/asm/arch-am33xx/mem.h | 9 ++++++
board/ti/am335x/board.c | 13 ++++++++
board/ti/am335x/mux.c | 53 ++++++++++++++++++++++++++++++++
boards.cfg | 1 +
include/configs/am335x_evm.h | 28 +++++++++++++++++
6 files changed, 108 insertions(+)
diff --git a/arch/arm/cpu/armv7/am33xx/mem.c b/arch/arm/cpu/armv7/am33xx/mem.c
index 160edd8..ea44f87 100644
--- a/arch/arm/cpu/armv7/am33xx/mem.c
+++ b/arch/arm/cpu/armv7/am33xx/mem.c
@@ -79,7 +79,11 @@ void gpmc_init(void)
writel(0x00000008, &gpmc_cfg->sysconfig);
writel(0x00000000, &gpmc_cfg->irqstatus);
writel(0x00000000, &gpmc_cfg->irqenable);
+#ifdef CONFIG_NOR
+ writel(0x00000200, &gpmc_cfg->config);
+#else
writel(0x00000012, &gpmc_cfg->config);
+#endif
/*
* Disable the GPMC0 config set by ROM code
*/
diff --git a/arch/arm/include/asm/arch-am33xx/mem.h b/arch/arm/include/asm/arch-am33xx/mem.h
index c3bf74e..9ece266 100644
--- a/arch/arm/include/asm/arch-am33xx/mem.h
+++ b/arch/arm/include/asm/arch-am33xx/mem.h
@@ -46,6 +46,7 @@
*
* Currently valid part Names are (PART):
* M_NAND - Micron NAND
+ * STNOR - STMicrolelctronics M29W128GL
*/
#define GPMC_SIZE_256M 0x0
#define GPMC_SIZE_128M 0x8
@@ -61,6 +62,14 @@
#define M_NAND_GPMC_CONFIG6 0x16000f80
#define M_NAND_GPMC_CONFIG7 0x00000008
+#define STNOR_GPMC_CONFIG1 0x00001200
+#define STNOR_GPMC_CONFIG2 0x00101000
+#define STNOR_GPMC_CONFIG3 0x00030301
+#define STNOR_GPMC_CONFIG4 0x10041004
+#define STNOR_GPMC_CONFIG5 0x000C1010
+#define STNOR_GPMC_CONFIG6 0x08070280
+#define STNOR_GPMC_CONFIG7 0x00000F48
+
/* max number of GPMC Chip Selects */
#define GPMC_MAX_CS 8
/* max number of GPMC regs */
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index a645d30..7bcaa98 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -27,6 +27,7 @@
#include <asm/arch/gpio.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/mem.h>
#include <asm/io.h>
#include <asm/emif.h>
#include <asm/gpio.h>
@@ -347,10 +348,22 @@ void s_init(void)
*/
int board_init(void)
{
+#ifdef CONFIG_NOR
+ const u32 gpmc_nor[GPMC_MAX_REG] = { STNOR_GPMC_CONFIG1,
+ STNOR_GPMC_CONFIG2, STNOR_GPMC_CONFIG3, STNOR_GPMC_CONFIG4,
+ STNOR_GPMC_CONFIG5, STNOR_GPMC_CONFIG6, STNOR_GPMC_CONFIG7 };
+#endif
+
gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
gpmc_init();
+#ifdef CONFIG_NOR
+ /* Reconfigure CS0 for NOR instead of NAND. */
+ enable_gpmc_cs_config(gpmc_nor, &gpmc_cfg->cs[0],
+ CONFIG_SYS_FLASH_BASE, GPMC_SIZE_16M);
+#endif
+
return 0;
}
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 2e09d98..187468e 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -190,6 +190,56 @@ static struct module_pin_mux nand_pin_mux[] = {
{-1},
};
+#if defined(CONFIG_NOR)
+static struct module_pin_mux bone_norcape_pin_mux[] = {
+ {OFFSET(lcd_data0), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A0 */
+ {OFFSET(lcd_data1), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A1 */
+ {OFFSET(lcd_data2), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A2 */
+ {OFFSET(lcd_data3), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A3 */
+ {OFFSET(lcd_data4), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A4 */
+ {OFFSET(lcd_data5), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A5 */
+ {OFFSET(lcd_data6), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A6 */
+ {OFFSET(lcd_data7), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A7 */
+ {OFFSET(lcd_vsync), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A8 */
+ {OFFSET(lcd_hsync), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A9 */
+ {OFFSET(lcd_pclk), MODE(1)| PULLUDEN | RXACTIVE}, /* NOR_A10 */
+ {OFFSET(lcd_ac_bias_en), MODE(1)| PULLUDEN | RXACTIVE}, /* NOR_A11 */
+ {OFFSET(lcd_data8), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A12 */
+ {OFFSET(lcd_data9), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A13 */
+ {OFFSET(lcd_data10), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A14 */
+ {OFFSET(lcd_data11), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A15 */
+ {OFFSET(lcd_data12), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A16 */
+ {OFFSET(lcd_data13), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A17 */
+ {OFFSET(lcd_data14), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A18 */
+ {OFFSET(lcd_data15), MODE(1) | PULLUDEN | RXACTIVE}, /* NOR_A19 */
+ {OFFSET(gpmc_ad0), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD0 */
+ {OFFSET(gpmc_ad1), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD1 */
+ {OFFSET(gpmc_ad2), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD2 */
+ {OFFSET(gpmc_ad3), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD3 */
+ {OFFSET(gpmc_ad4), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD4 */
+ {OFFSET(gpmc_ad5), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD5 */
+ {OFFSET(gpmc_ad6), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD6 */
+ {OFFSET(gpmc_ad7), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD7 */
+ {OFFSET(gpmc_ad8), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD8 */
+ {OFFSET(gpmc_ad9), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD9 */
+ {OFFSET(gpmc_ad10), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD10 */
+ {OFFSET(gpmc_ad11), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD11 */
+ {OFFSET(gpmc_ad12), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD12 */
+ {OFFSET(gpmc_ad13), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD13 */
+ {OFFSET(gpmc_ad14), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD14 */
+ {OFFSET(gpmc_ad15), MODE(0) | PULLUDEN | RXACTIVE}, /* NOR_AD15 */
+
+ {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN) | RXACTIVE}, /* NOR_CE */
+ {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN) | RXACTIVE}, /* NOR_ADVN_ALE */
+ {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN | RXACTIVE)},/* NOR_OE */
+ {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN | RXACTIVE)},/* NOR_BE0N_CLE */
+ {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN | RXACTIVE)}, /* NOR_WEN */
+ {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUDEN)}, /* NOR WAIT */
+ {-1},
+};
+#endif
+
+
void enable_uart0_pin_mux(void)
{
configure_module_pin_mux(uart0_pin_mux);
@@ -268,6 +318,9 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header)
configure_module_pin_mux(mii1_pin_mux);
configure_module_pin_mux(mmc0_pin_mux);
configure_module_pin_mux(mmc1_pin_mux);
+#if defined(CONFIG_NOR)
+ configure_module_pin_mux(bone_norcape_pin_mux);
+#endif
} else if (board_is_gp_evm(header)) {
/* General Purpose EVM */
unsigned short profile = detect_daughter_board_profile();
diff --git a/boards.cfg b/boards.cfg
index 4e556e0..58ed412 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -242,6 +242,7 @@ vexpress_ca15_tc2 arm armv7 vexpress armltd
vexpress_ca5x2 arm armv7 vexpress armltd
vexpress_ca9x4 arm armv7 vexpress armltd
am335x_evm arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1
+am335x_evm_nor arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,NOR
am335x_evm_spiboot arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,SPI_BOOT
am335x_evm_uart1 arm armv7 am335x ti am33xx am335x_evm:SERIAL2,CONS_INDEX=2
am335x_evm_uart2 arm armv7 am335x ti am33xx am335x_evm:SERIAL3,CONS_INDEX=3
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index c00a97f..155f5d9 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -528,4 +528,32 @@
#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
#endif
+/*
+ * NOR Size = 16 MiB
+ * Number of Sectors/Blocks = 128
+ * Sector Size = 128 KiB
+ * Word length = 16 bits
+ * Default layout:
+ * 0x000000 - 0x07FFFF : U-Boot (512 KiB)
+ * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB)
+ * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB)
+ * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB)
+ * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB)
+ */
+#if defined(CONFIG_NOR)
+#undef CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_FLASH_CFI_MTD
+#define CONFIG_SYS_MAX_FLASH_SECT 128
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_FLASH_BASE (0x08000000)
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_MTD_DEVICE
+#define CONFIG_CMD_FLASH
+#endif /* NOR support */
+
#endif /* ! __CONFIG_AM335X_EVM_H */
--
1.7.9.5
More information about the U-Boot
mailing list