[U-Boot] [PATCHv2 4/8] dra7xx_evm: add SPL API, QSPI, and serial flash support

Sourav Poddar sourav.poddar at ti.com
Tue Jul 23 10:59:35 CEST 2013


From: Matt Porter <matt.porter at linaro.org>

Enables support for SPI SPL, QSPI and Spansion serial flash device
on the EVM. Configures pin muxes for QSPI mode.

Signed-off-by: Matt Porter <matt.porter at linaro.org>
Signed-off-by: Sourav Poddar <sourav.poddar at ti.com>
---
 board/ti/dra7xx/mux_data.h   |   10 ++++++++++
 include/configs/dra7xx_evm.h |   17 +++++++++++++++++
 2 files changed, 27 insertions(+), 0 deletions(-)

diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
index 338a241..2441c55 100644
--- a/board/ti/dra7xx/mux_data.h
+++ b/board/ti/dra7xx/mux_data.h
@@ -53,5 +53,15 @@ const struct pad_conf_entry core_padconf_array_essential[] = {
 	{UART1_RTSN, (IEN | PTU | PDIS | M3)},	/* UART1_RTSN */
 	{I2C1_SDA, (IEN | PTU | PDIS | M0)},	/* I2C1_SDA */
 	{I2C1_SCL, (IEN | PTU | PDIS | M0)},	/* I2C1_SCL */
+	{GPMC_A13, (IEN | PDIS | M1)},	/* QSPI1_RTCLK */
+	{GPMC_A14, (IEN | PDIS | M1)},  /* QSPI1_D[3] */
+	{GPMC_A15, (IEN | PDIS | M1)},	/* QSPI1_D[2] */
+	{GPMC_A16, (IEN | PDIS | M1)},	/* QSPI1_D[1] */
+	{GPMC_A17, (IEN | PDIS | M1)},	/* QSPI1_D[0] */
+	{GPMC_A18, (IEN | PDIS | M1)},	/* QSPI1_SCLK */
+	{GPMC_A3, (IEN | PDIS | M1)},	/* QSPI1_CS2 */
+	{GPMC_A4, (IEN | PDIS | M1)},	/* QSPI1_CS3 */
+	{GPMC_CS2, (IEN | PTU | PDIS | M1)},	/* QSPI1_CS0 */
+	{GPMC_CS3, (IEN | PTU | PDIS | M1)},	/* QSPI1_CS1*/
 };
 #endif /* _MUX_DATA_DRA7XX_H_ */
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index c11f005..f30a795 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -44,4 +44,21 @@
 
 #define CONSOLEDEV		"ttyO0"
 
+/* SPI */
+#define CONFIG_TI_QSPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_SF_DEFAULT_SPEED                12000000
+#define CONFIG_DEFAULT_SPI_MODE                SPI_MODE_3
+
+/* SPI SPL */
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_BUS             0
+#define CONFIG_SPL_SPI_CS              0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
+
 #endif /* __CONFIG_DRA7XX_EVM_H */
-- 
1.7.1



More information about the U-Boot mailing list