[U-Boot] [PATCH v3 3/3] arm: omap3: Add SPL support to cm_t35

[Albert ARIBAUD]

Hi Stefan,

On Tue, 30 Jul 2013 12:52:10 +0200, Stefan Roese <sr at denx.de> wrote:

> Add SPL U-Boot support to replace x-loader on the Compulab cm_t35
> board. Currently only the 256MiB SDRAM board versions are supported.
> 
> Tested by booting via MMC and NAND.
>
> Signed-off-by: Stefan Roese <sr at denx.de>
> Cc: Tom Rini <trini at ti.com>
> Cc: Igor Grinberg <grinberg at compulab.co.il>
> ---
> v3:
> - Some instability of this SDRAM setup has been detected while running
>   Linux. Comparison with the x-loader setup showed that mcfg is configured
>   slightly differently here. CM_T35 needs RAS-width of 14 instead of
>   13. So use the define MICRON_V_MCFG_200 which implements this 14
>   as RAS width.
> 
> v2:

I assume this means that your request to Tom about PRing V2 is withdrawn
and I can apply his PR as-is. Correct?

Amicalement,
-- 
Albert.