[U-Boot] [PATCH v3] spi/arm-pl022: Add support for ARM PL022 spi controller

[Jagan Teki]

Hi,

Does this tested on hw, please re-base the tree and send the next version patch.
Let me know if it ok to review under current tree.

--
Thanks,
Jagan.

On Thu, Dec 13, 2012 at 7:31 PM, Armando Visconti
<armando.visconti at st.com> wrote:
> On 12/13/2012 12:41 PM, Vipin KUMAR wrote:
>>
>> From: Armando Visconti<armando.visconti at st.com>
>>
>> This patch adds the support for the ARM PL022 SPI controller for the
>> standard
>> variant (0x00041022), which has a 16bit wide and 8 locations deep TX/RX
>> FIFO.
>>
>> Signed-off-by: Armando Visconti<armando.visconti at st.com>
>> Signed-off-by: Vipin Kumar<vipin.kumar at st.com>
>> ---
>> Changes in v3
>>   Added void to spi_init arguments
>>   Used readl/writel in place of u16 accessors
>>   Fix: Provided address of register in place of value to readl/writel IO
>>    accessors
>>
>> Tested with spear1340-evb
>>
>
> I recall now that SPI variant is same also on the new SoC (I2C cell is
> different).
>
> So no need to test over it.
> SPEAr1340 is enough.
>
> Ciao,
> Arm
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot