June 2013 Archives by subject
Starting: Sat Jun 1 00:08:57 CEST 2013
Ending: Sun Jun 30 18:38:15 CEST 2013
Messages: 2223
- [U-Boot] 2013.07-rc1 plans?
Otavio Salvador
- [U-Boot] 2013.07-rc1 plans?
Albert ARIBAUD
- [U-Boot] 2013.07-rc1 plans?
Otavio Salvador
- [U-Boot] 2013.07-rc1 plans?
Tom Rini
- [U-Boot] 2013.07-rc1 plans?
Otavio Salvador
- [U-Boot] 2013.07-rc1 plans?
Tom Rini
- [U-Boot] : sf: spansion: Add support for S25FL128S
Jagan Teki
- [U-Boot] : sf: spansion: Add support for S25FL128S
Fleming Andy-AFLEMING
- [U-Boot] : sf: spansion: Add support for S25FL128S
Scott Wood
- [U-Boot] : sf: spansion: Add support for S25FL128S
Fleming Andy-AFLEMING
- [U-Boot] : sf: spansion: Add support for S25FL128S
Tom Rini
- [U-Boot] [[PATCH]] imx6: fix GPR2 wrong definition
Pierre Aubert
- [U-Boot] [[PATCH]] imx6: fix GPR2 wrong definition
Dirk Behme
- [U-Boot] [ANN] v2013.07-rc1
Tom Rini
- [U-Boot] [ANN] v2013.07-rc1
Lubomir Popov
- [U-Boot] [ANN] v2013.07-rc1
Simon Glass
- [U-Boot] [ANN] v2013.07-rc1
Lubomir Popov
- [U-Boot] [ANN] v2013.07-rc1
Simon Glass
- [U-Boot] [ANN] v2013.07-rc1
Jeroen Hofstee
- [U-Boot] [ANN] v2013.07-rc1
Lubomir Popov
- [U-Boot] [ANN] v2013.07-rc2
Tom Rini
- [U-Boot] [Fwd: Kernel bring Up fail in NOR boot for custom board]
Shrimanth
- [U-Boot] [GIT PULL] u-boot-mips/fixes
Daniel Schwierzeck
- [U-Boot] [GIT PULL] u-boot-mips/fixes
Tom Rini
- [U-Boot] [LONG] Re: [PATCH v3 0/6] Optimize ARM relocation
Albert ARIBAUD
- [U-Boot] [PATCH 0/11] MIPS: bootm updates
Daniel Schwierzeck
- [U-Boot] [PATCH 0/11] MIPS: bootm updates
Gabor Juhos
- [U-Boot] [PATCH 0/11] MIPS: bootm updates
Langer Thomas (LQDE RD ST PON SW)
- [U-Boot] [PATCH 0/11] MIPS: bootm updates
Daniel Schwierzeck
- [U-Boot] [PATCH 0/11] MIPS: bootm updates
Daniel Schwierzeck
- [U-Boot] [PATCH 0/2] Add ethernet support for Congatec qmx6qeval
SARTRE Leo
- [U-Boot] [PATCH 0/2] add support for LaCie CloudBox
Frederic Leroy
- [U-Boot] [PATCH 0/2] fix displaying IRQ stack info
Albert ARIBAUD
- [U-Boot] [PATCH 0/2] make u-boot/drivers/net/designware cache supportive
Joe Hershberger
- [U-Boot] [PATCH 0/2] pxa: fix memory coherency problem after relocation
Mike Dunn
- [U-Boot] [PATCH 0/2] vf610: Add I2C support for Freescale Vybrid VF610 platform
Alison Wang
- [U-Boot] [PATCH 0/2] vf610: Add I2C support for Freescale Vybrid VF610 platform
Wang Huan-B18965
- [U-Boot] [PATCH 0/2] video: lcd: splash screen prepare changes
Robert Winkler
- [U-Boot] [PATCH 0/2] video: lcd: splash screen prepare changes
Igor Grinberg
- [U-Boot] [PATCH 0/3 v2] video: lcd: splash screen prepare changes
Robert Winkler
- [U-Boot] [PATCH 0/3 v2] video: lcd: splash screen prepare changes
Robert Winkler
- [U-Boot] [PATCH 0/3] Add Arndale board support
Inderpal Singh
- [U-Boot] [PATCH 0/3] Adopt u-boot build to OS X
Andreas Bießmann
- [U-Boot] [PATCH 0/3] net2big_v2: initialize fan and LEDs at startup
Simon Guinot
- [U-Boot] [PATCH 0/4 V5] SMDK5250: FDT: Add device tree support for console
Rajeshwari Birje
- [U-Boot] [PATCH 0/4 V6] EXYNOS5250: FDT: Add device tree support for console
Rajeshwari Shinde
- [U-Boot] [PATCH 0/4 V7] EXYNOS5250: FDT: Add device tree support for console
Minkyu Kang
- [U-Boot] [PATCH 0/4 V7] EXYNOS5250: FDT: Add device tree support for console
Rajeshwari Shinde
- [U-Boot] [PATCH 0/4] ARM: AM33xx: Cleanup clocks and hwinit
Lokesh Vutla
- [U-Boot] [PATCH 0/4] ARM: AM33xx: Cleanup clocks and hwinit
Lokesh Vutla
- [U-Boot] [PATCH 0/4] ARM: AM33xx: Cleanup clocks and hwinit
Tom Rini
- [U-Boot] [PATCH 0/4] ARM: AM33xx: Cleanup clocks and hwinit
Lokesh Vutla
- [U-Boot] [PATCH 0/4] ARM: at91: atmel_nand: check ONFI ecc minimum requirement
Josh Wu
- [U-Boot] [PATCH 0/4] arm:goni: Update GONI configuration
Lukasz Majewski
- [U-Boot] [PATCH 0/4] imx: nitrogen6x: Config changes
Robert Winkler
- [U-Boot] [PATCH 0/4] MIPS: minor cleanups
Gabor Juhos
- [U-Boot] [PATCH 0/4] MIPS: minor cleanups
Daniel Schwierzeck
- [U-Boot] [PATCH 0/6] ARMv7: Add HYP mode switching support
Christoffer Dall
- [U-Boot] [PATCH 0/6] Upstream environment changes being used in Yocto/OE
Otavio Salvador
- [U-Boot] [PATCH 0/6] Upstream environment changes being used in Yocto/OE
Fabio Estevam
- [U-Boot] [PATCH 0/8] rely on latest dtc, simplify
Stephen Warren
- [U-Boot] [PATCH 0/8] rely on latest dtc, simplify
Tom Rini
- [U-Boot] [PATCH 0/8] rely on latest dtc, simplify
Stephen Warren
- [U-Boot] [PATCH 0/8] rely on latest dtc, simplify
Tom Rini
- [U-Boot] [PATCH 0/8] rely on latest dtc, simplify
Tom Rini
- [U-Boot] [PATCH 0/8] rely on latest dtc, simplify
Stephen Warren
- [U-Boot] [PATCH 0/8] rely on latest dtc, simplify
Tom Rini
- [U-Boot] [PATCH 00/10] MIPS: unify low-level assembly code
Gabor Juhos
- [U-Boot] [PATCH 00/10] MIPS: unify low-level assembly code
Daniel Schwierzeck
- [U-Boot] [PATCH 00/10] PXE support updates
Rob Herring
- [U-Boot] [PATCH 00/10] PXE support updates
Joe Hershberger
- [U-Boot] [PATCH 00/10] PXE support updates
Joe Hershberger
- [U-Boot] [PATCH 01/10 v5] powerpc/mpc85xx: support application without resetvec segment in the linker script
ying.zhang at freescale.com
- [U-Boot] [PATCH 01/10 v5] powerpc/mpc85xx: support application without resetvec segment in the linker script
Wolfgang Denk
- [U-Boot] [PATCH 01/10 v5] powerpc/mpc85xx: support application without resetvec segment in the linker script
Tom Rini
- [U-Boot] [PATCH 01/10 v5] powerpc/mpc85xx: support application without resetvec segment in the linker script
Andy Fleming
- [U-Boot] [PATCH 01/10] MIPS: mips32/start.S: use t8 register for dynamic relocation
Gabor Juhos
- [U-Boot] [PATCH 01/11] MIPS: bootm: fix checkpatch.pl warnings
Daniel Schwierzeck
- [U-Boot] [PATCH 01/11] powerpc/corenet: Move CONFIG_FSL_CORENET out of board header file
York Sun
- [U-Boot] [PATCH 02/10 v5] powerpc/mpc85xx: modify the functionality clear_bss and aligning the end address of the BSS
ying.zhang at freescale.com
- [U-Boot] [PATCH 02/10] MIPS: mips32/start.S: rework relocation info check
Gabor Juhos
- [U-Boot] [PATCH 02/11] drivers/fm: Fix compiling error if FW location is not defined
York Sun
- [U-Boot] [PATCH 02/11] MIPS: bootm: optimise kernel entry call
Daniel Schwierzeck
- [U-Boot] [PATCH 03/10 v5] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH 03/10 v5] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
Tom Rini
- [U-Boot] [PATCH 03/10 v5] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
Andy Fleming
- [U-Boot] [PATCH 03/10] MIPS: xburst/start.S: save relocation address in s2 register
Gabor Juhos
- [U-Boot] [PATCH 03/11] MIPS: bootm: add support for LMB
Daniel Schwierzeck
- [U-Boot] [PATCH 03/11] mpc85xx: Base emulator support
York Sun
- [U-Boot] [PATCH 04/10 v5] Makefile: move the common makefile line to public area
ying.zhang at freescale.com
- [U-Boot] [PATCH 04/10 v5] Makefile: move the common makefile line to public area
Tom Rini
- [U-Boot] [PATCH 04/10] MIPS: xburst/start.S: save relocation offset in s1 register
Gabor Juhos
- [U-Boot] [PATCH 04/11] MIPS: bootm: refactor initialisation of kernel cmdline
Daniel Schwierzeck
- [U-Boot] [PATCH 04/11] MIPS: bootm: refactor initialisation of kernel cmdline
Wolfgang Denk
- [U-Boot] [PATCH 04/11] MIPS: bootm: refactor initialisation of kernel cmdline
Daniel Schwierzeck
- [U-Boot] [PATCH 04/11] powerpc/t4qds: cleanup board header file
York Sun
- [U-Boot] [PATCH 05/10 v2] powerpc: deleted unused symbol CONFIG_SPL_NAND_MINIMAL and enabled some functionality for common SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH 05/10 v5] powerpc: deleted unused symbol CONFIG_SPL_NAND_MINIMAL and enabled some functionality for common SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH 05/10] MIPS: xburst/start.S: save gd in s0 register
Gabor Juhos
- [U-Boot] [PATCH 05/11] MIPS: bootm: refactor initialisation of kernel environment
Daniel Schwierzeck
- [U-Boot] [PATCH 05/11] powerpc/corenet: Move RCW print to cpu.c
York Sun
- [U-Boot] [PATCH 06/10 v5] spl: env_common.c: make CONFIG_SPL_BUILD contain function env_import
Wolfgang Denk
- [U-Boot] [PATCH 06/10 v5] spl: env_common.c: make CONFIG_SPL_BUILD contain function env_import
ying.zhang at freescale.com
- [U-Boot] [PATCH 06/10 v5] spl: env_common.c: make CONFIG_SPL_BUILD contain function env_import
Zhang Ying-B40530
- [U-Boot] [PATCH 06/10 v5] spl: env_common.c: make CONFIG_SPL_BUILD contain function env_import
Scott Wood
- [U-Boot] [PATCH 06/10 v5] spl: env_common.c: make CONFIG_SPL_BUILD contain function env_import
Tom Rini
- [U-Boot] [PATCH 06/10 v5] spl: env_common.c: make CONFIG_SPL_BUILD contain function env_import
Zhang Ying-B40530
- [U-Boot] [PATCH 06/10 v5] spl: env_common.c: make CONFIG_SPL_BUILD contain function env_import
Tom Rini
- [U-Boot] [PATCH 06/10 v5] spl: env_common.c: make CONFIG_SPL_BUILD contain function env_import
Scott Wood
- [U-Boot] [PATCH 06/10 v5] spl: env_common.c: make CONFIG_SPL_BUILD contain function env_import
Tom Rini
- [U-Boot] [PATCH 06/10] MIPS: xburst/start.S: use t8 register for dynamic relocation
Gabor Juhos
- [U-Boot] [PATCH 06/11] MIPS: bootm: make initialisation of Linux environment optional
Daniel Schwierzeck
- [U-Boot] [PATCH 06/11] powerpc/T4240EMU: Add T4240EMU target
York Sun
- [U-Boot] [PATCH 06/11] powerpc/T4240EMU: Add T4240EMU target
Wolfgang Denk
- [U-Boot] [PATCH 06/11] powerpc/T4240EMU: Add T4240EMU target
York Sun
- [U-Boot] [PATCH 06/11] powerpc/T4240EMU: Add T4240EMU target
Scott Wood
- [U-Boot] [PATCH 07/10 v5] powerpc/p1022ds: boot from SD Card with SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH 07/10] MIPS: xburst/start.S: rework relocation info check
Gabor Juhos
- [U-Boot] [PATCH 07/11] MIPS: bootm: add support for generic relocation of init ramdisks
Daniel Schwierzeck
- [U-Boot] [PATCH 07/11] powerpc/mpc8xxx: Set inactive csn_bnds to 0xffffffff
York Sun
- [U-Boot] [PATCH 08/10 v5] powerpc/p1022ds: boot from spi flash with SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH 08/10] MIPS: mips32/cache.S: save return address in t9 register
Gabor Juhos
- [U-Boot] [PATCH 08/11] MIPS: bootm: automatically initialise kernel cmdline variable 'mem'
Daniel Schwierzeck
- [U-Boot] [PATCH 08/11] powerpc/t4240qds: Adjust DDR timing for RDIMM
York Sun
- [U-Boot] [PATCH 09/10 v2] nand: tpl : introduce the TPL based on the SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH 09/10 v5] nand: tpl : introduce the TPL based on the SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH 09/10] MIPS: mips32/cache.S: store cache line size in t8 register
Gabor Juhos
- [U-Boot] [PATCH 09/11] MIPS: bootm: automatically initialise kernel cmdline variables 'rd_start' and 'rd_size'
Daniel Schwierzeck
- [U-Boot] [PATCH 09/11] powerpc/mpc8xxx: Add x4 DDR device support
York Sun
- [U-Boot] [PATCH 1/1 RESEND] NET: Fix system hanging if NET device is not installed
Jim Lin
- [U-Boot] [PATCH 1/1 RESEND] NET: Fix system hanging if NET device is not installed
Stephen Warren
- [U-Boot] [PATCH 1/1] Add support of IB8315 board
Sergey Gerasimov
- [U-Boot] [PATCH 1/1] Add support of IB8315 board
Sergey Gerasimov
- [U-Boot] [PATCH 1/1] Add support of IB8315 board
Wolfgang Denk
- [U-Boot] [PATCH 1/1] socfpga: Adding System Manager driver which will configure the pin mux for real hardware Cyclone V
Chin Liang See
- [U-Boot] [PATCH 1/1] socfpga: Adding System Manager driver which will configure the pin mux for real hardware Cyclone V
Pavel Machek
- [U-Boot] [PATCH 1/1] socfpga: Adding System Manager driver which will configure the pin mux for real hardware Cyclone V
Chin Liang See
- [U-Boot] [PATCH 1/1] socfpga: Consolidating reset code into reset_manager.c. Also separating reset configuration for virtual target and real hardware Cyclone V development kit
Chin Liang See
- [U-Boot] [PATCH 1/1] socfpga: Consolidating reset code into reset_manager.c. Also separating reset configuration for virtual target and real hardware Cyclone V development kit
Pavel Machek
- [U-Boot] [PATCH 1/1] socfpga: Consolidating reset code into reset_manager.c. Also separating reset configuration for virtual target and real hardware Cyclone V development kit
Chin Liang See
- [U-Boot] [PATCH 1/2 V5] spi: Add support for preamble bytes
Jagan Teki
- [U-Boot] [PATCH 1/2 V5] spi: Add support for preamble bytes
Simon Glass
- [U-Boot] [PATCH 1/2 V5] spi: Add support for preamble bytes
Jagan Teki
- [U-Boot] [PATCH 1/2 V5] spi: Add support for preamble bytes
Simon Glass
- [U-Boot] [PATCH 1/2] arm: add support for LaCie CloudBox
Frederic Leroy
- [U-Boot] [PATCH 1/2] arm: add support for LaCie CloudBox
Wolfgang Denk
- [U-Boot] [PATCH 1/2] arm: add support for LaCie CloudBox
Simon Guinot
- [U-Boot] [PATCH 1/2] arm: add support for LaCie CloudBox
Simon Guinot
- [U-Boot] [PATCH 1/2] ARM: tegra: enable LCD panel on Harmony
Stephen Warren
- [U-Boot] [PATCH 1/2] ARM: tegra: enable LCD panel on Harmony
Stephen Warren
- [U-Boot] [PATCH 1/2] blackfin: gpio: Unreserve gpio in special_gpio_free()
Axel Lin
- [U-Boot] [PATCH 1/2] blackfin: gpio: Unreserve gpio in special_gpio_free()
Sonic Zhang
- [U-Boot] [PATCH 1/2] board/bsc9132qds: Add DSP side tlb and laws
Priyanka Jain
- [U-Boot] [PATCH 1/2] board/bsc9132qds: Add DSP side tlb and laws
Prabhakar Lad
- [U-Boot] [PATCH 1/2] board/bsc9132qds: Add DSP side tlb and laws
Jain Priyanka-B32167
- [U-Boot] [PATCH 1/2] board/bsc9132qds: Add DSP side tlb and laws
Albert ARIBAUD
- [U-Boot] [PATCH 1/2] board/bsc9132qds: Add DSP side tlb and laws
Prabhakar Lad
- [U-Boot] [PATCH 1/2] board/bsc9132qds: Add DSP side tlb and laws
Albert ARIBAUD
- [U-Boot] [PATCH 1/2] board/bsc9132qds: Add DSP side tlb and laws
Scott Wood
- [U-Boot] [PATCH 1/2] board/bsc9132qds: Add DSP side tlb and laws
Scott Wood
- [U-Boot] [PATCH 1/2] dfu:ext4:fix Fix ext4{read|write} command formatting
Lukasz Majewski
- [U-Boot] [PATCH 1/2] mx28evk: Convert to PHYLIB
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx28evk: Convert to PHYLIB
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx28evk: Convert to PHYLIB
Stefano Babic
- [U-Boot] [PATCH 1/2] mx6qsabreauto: Add i2c to mx6qsabreauto board
Stefano Babic
- [U-Boot] [PATCH 1/2] OMAP5: Fix gpio_bank_54xx setting
Axel Lin
- [U-Boot] [PATCH 1/2] PHY: micrel: helper function for KSZ9031
SARTRE Leo
- [U-Boot] [PATCH 1/2] PHY: micrel: helper function for KSZ9031
Otavio Salvador
- [U-Boot] [PATCH 1/2] PHY: micrel: helper function for KSZ9031
Stefano Babic
- [U-Boot] [PATCH 1/2] power: exynos-tmu: fix warnings and clean up code
Naveen Krishna Ch
- [U-Boot] [PATCH 1/2] power: exynos-tmu: fix warnings and clean up code
Minkyu Kang
- [U-Boot] [PATCH 1/2] powerpc/85xx: Add C29x SoC support
Andy Fleming
- [U-Boot] [PATCH 1/2] powerpc/85xx: Add C29x SoC support
Po Liu
- [U-Boot] [PATCH 1/2] PPC 74xx_7xx: Fix build warnings for ELPPC board
Wolfgang Denk
- [U-Boot] [PATCH 1/2] PPC 74xx_7xx: Fix build warnings for ELPPC board
Wolfgang Denk
- [U-Boot] [PATCH 1/2] pxa: use -mcpu=xscale compiler option
Mike Dunn
- [U-Boot] [PATCH 1/2] pxa: use -mcpu=xscale compiler option
Marek Vasut
- [U-Boot] [PATCH 1/2] Revert "Add a 'fake' go command to the bootm command"
Simon Glass
- [U-Boot] [PATCH 1/2] spi: cf_qspi: Use DIV_ROUND_UP at appropriate place
Richard Retanubun
- [U-Boot] [PATCH 1/2] spi: cf_qspi: Use DIV_ROUND_UP at appropriate place
Jagan Teki
- [U-Boot] [PATCH 1/2] spi: cf_qspi: Use DIV_ROUND_UP at appropriate place
Jagan Teki
- [U-Boot] [PATCH 1/2] spi: cf_qspi: Use DIV_ROUND_UP at appropriate place
Axel Lin
- [U-Boot] [PATCH 1/2] spi: tegra114_spi: Convert to use spi_alloc_slave()
Axel Lin
- [U-Boot] [PATCH 1/2] spi: tegra114_spi: Convert to use spi_alloc_slave()
Marek Vasut
- [U-Boot] [PATCH 1/2] spi: tegra114_spi: Convert to use spi_alloc_slave()
Jagan Teki
- [U-Boot] [PATCH 1/2] vf610: Add I2C support for Vybrid VF610 platform
Alison Wang
- [U-Boot] [PATCH 1/2] vf610twr: Add default environment in line with other Freescale boards
Otavio Salvador
- [U-Boot] [PATCH 1/2] vf610twr: Add default environment in line with other Freescale boards
Fabio Estevam
- [U-Boot] [PATCH 1/2] vf610twr: Add default environment in line with other Freescale boards
Otavio Salvador
- [U-Boot] [PATCH 1/2] video: lcd: Add CONFIG_SPLASH_SCREEN_PREPARE support to CONFIG_VIDEO
Robert Winkler
- [U-Boot] [PATCH 1/2] video: lcd: Add CONFIG_SPLASH_SCREEN_PREPARE support to CONFIG_VIDEO
Igor Grinberg
- [U-Boot] [PATCH 1/2] video: lcd: Add CONFIG_SPLASH_SCREEN_PREPARE support to CONFIG_VIDEO
Robert Winkler
- [U-Boot] [PATCH 1/2] video: lcd: Add CONFIG_SPLASH_SCREEN_PREPARE support to CONFIG_VIDEO
Igor Grinberg
- [U-Boot] [PATCH 1/2] video: lcd: Add CONFIG_SPLASH_SCREEN_PREPARE support to CONFIG_VIDEO
Robert Winkler
- [U-Boot] [PATCH 1/2] wandboard: Enable HDMI splashscreen
Stefano Babic
- [U-Boot] [PATCH 1/3 v2] video: lcd: Add CONFIG_SPLASH_SCREEN_PREPARE support to CONFIG_VIDEO
Robert Winkler
- [U-Boot] [PATCH 1/3 v2] video: lcd: Add CONFIG_SPLASH_SCREEN_PREPARE support to CONFIG_VIDEO
Igor Grinberg
- [U-Boot] [PATCH 1/3] arm: spl: Fix SPL booting for OMAP3
Stefan Roese
- [U-Boot] [PATCH 1/3] arm: spl: Fix SPL booting for OMAP3
Albert ARIBAUD
- [U-Boot] [PATCH 1/3] arm: spl: Fix SPL booting for OMAP3
Stefan Roese
- [U-Boot] [PATCH 1/3] arm: spl: Fix SPL booting for OMAP3
Albert ARIBAUD
- [U-Boot] [PATCH 1/3] arm: spl: Fix SPL booting for OMAP3
Stefan Roese
- [U-Boot] [PATCH 1/3] arm: spl: Fix SPL booting for OMAP3
Albert ARIBAUD
- [U-Boot] [PATCH 1/3] hwmon: lm63: Use ARRAY_SIZE at appropriate place
Axel Lin
- [U-Boot] [PATCH 1/3] lib/rsa/rsa-sig.c: compile on OS X
Andreas Bießmann
- [U-Boot] [PATCH 1/3] net2big_v2: initialize I2C fan at startup
Simon Guinot
- [U-Boot] [PATCH 1/3] net2big_v2: initialize I2C fan at startup
Prafulla Wadaskar
- [U-Boot] [PATCH 1/3] net: macb: using AT91FAMILY replace #ifdeferry
Andreas Bießmann
- [U-Boot] [PATCH 1/3] net: macb: using AT91FAMILY replace #ifdeferry
Joe Hershberger
- [U-Boot] [PATCH 1/3] powerpc/srio: Update the SRIO LIODN registers and ID table macro
Liu Gang
- [U-Boot] [PATCH 1/4 V5] EXYNOS5: FDT: Add compatible strings for Serial
Minkyu Kang
- [U-Boot] [PATCH 1/4 V6] EXYNOS5: FDT: Add compatible strings for Serial
Minkyu Kang
- [U-Boot] [PATCH 1/4 V6] EXYNOS5: FDT: Add compatible strings for Serial
Rajeshwari Birje
- [U-Boot] [PATCH 1/4 V6] EXYNOS5: FDT: Add compatible strings for Serial
Rajeshwari Shinde
- [U-Boot] [PATCH 1/4 V7] EXYNOS5: FDT: Add compatible strings for Serial
Rajeshwari Shinde
- [U-Boot] [PATCH 1/4] ARM: AM33xx: Cleanup dplls data
Lokesh Vutla
- [U-Boot] [PATCH 1/4] ARM: AM33xx: Cleanup dplls data
Heiko Schocher
- [U-Boot] [PATCH 1/4] ARM: AM33xx: Cleanup dplls data
Lokesh Vutla
- [U-Boot] [PATCH 1/4] ARM: AM33xx: Cleanup dplls data
Heiko Schocher
- [U-Boot] [PATCH 1/4] ARM: AM33xx: Cleanup dplls data
Lokesh Vutla
- [U-Boot] [PATCH 1/4] ARM: AM33xx: Cleanup dplls data
Heiko Schocher
- [U-Boot] [PATCH 1/4] ARM: AM33xx: Cleanup dplls data
Lokesh Vutla
- [U-Boot] [PATCH 1/4] ARM: AM33xx: Cleanup dplls data
Heiko Schocher
- [U-Boot] [PATCH 1/4] ARM: AM33xx: Cleanup dplls data
Tom Rini
- [U-Boot] [PATCH 1/4] ARM: AM33xx: Cleanup dplls data
Heiko Schocher
- [U-Boot] [PATCH 1/4] ARM: AM33xx: Cleanup dplls data
Heiko Schocher
- [U-Boot] [PATCH 1/4] ARM: at91: atmel_nand: pmecc driver will select the galois table by sector size
Josh Wu
- [U-Boot] [PATCH 1/4] arm:goni: Update configuration for goni target
Lukasz Majewski
- [U-Boot] [PATCH 1/4] imx: nitrogen6x: Enabled data cache
Robert Winkler
- [U-Boot] [PATCH 1/4] imx: nitrogen6x: Enabled data cache
Stefano Babic
- [U-Boot] [PATCH 1/4] MIPS: mips32/time.c: fix checkpatch errors/warnings
Gabor Juhos
- [U-Boot] [PATCH 1/4] nds32: Enable two banks of SDRAM on Andes board
Kuan-Yu Kuo
- [U-Boot] [PATCH 1/4] sf: Unify spi_flash write code
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH 1/4] sf: Unify spi_flash write code
Simon Glass
- [U-Boot] [PATCH 1/4] sf: Unify spi_flash write code
Jagan Teki
- [U-Boot] [PATCH 1/4] sf: Unify spi_flash write code
Simon Glass
- [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state
Christoffer Dall
- [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state
Albert ARIBAUD
- [U-Boot] [PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state
Albert ARIBAUD
- [U-Boot] [PATCH 1/6] mx53loco: Change default environment to cope with OE changes
Otavio Salvador
- [U-Boot] [PATCH 1/6] README: mx28_common: Keep the text within 80 columns
Stefano Babic
- [U-Boot] [PATCH 1/7 v6] powerpc: deleted unused symbol CONFIG_SPL_NAND_MINIMAL and enabled some functionality for common SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH 1/8] xilinx: move microblaze-generic .dts to standard location
Stephen Warren
- [U-Boot] [PATCH 1/8] xilinx: move microblaze-generic .dts to standard location
Simon Glass
- [U-Boot] [PATCH 1/8] xilinx: move microblaze-generic .dts to standard location
Michal Simek
- [U-Boot] [PATCH 10/10 v5] powerpc: p1022ds: support TPL on the P1022DS
ying.zhang at freescale.com
- [U-Boot] [PATCH 10/10] MIPS: mips32/cache.S: use v1 register for indirect function calls
Gabor Juhos
- [U-Boot] [PATCH 10/10] powerpc: p1022ds: support TPL on the P1022DS
Timur Tabi
- [U-Boot] [PATCH 10/10] powerpc: p1022ds: support TPL on the P1022DS
Andy Fleming
- [U-Boot] [PATCH 10/10] powerpc: p1022ds: support TPL on the P1022DS
ying.zhang at freescale.com
- [U-Boot] [PATCH 10/10] powerpc: p1022ds: support TPL on the P1022DS
Scott Wood
- [U-Boot] [PATCH 10/11] MIPS: bootm: add YAMON style Linux preparation/jump code for Qemu Malta
Daniel Schwierzeck
- [U-Boot] [PATCH 10/11] powerpc/mpc8xxx: Add memory reset control
York Sun
- [U-Boot] [PATCH 11/11] MIPS: bootm: drop obsolete Qemu specific bootm implementation
Daniel Schwierzeck
- [U-Boot] [PATCH 11/11] powerpc/mpc85xx: Workaround for A-005812
York Sun
- [U-Boot] [PATCH 2/2 V3] spi: exynos: Support a delay after deactivate
Jagan Teki
- [U-Boot] [PATCH 2/2 V3] spi: exynos: Support a delay after deactivate
Simon Glass
- [U-Boot] [PATCH 2/2 V3] spi: exynos: Support a delay after deactivate
Jagan Teki
- [U-Boot] [PATCH 2/2 V5] spi: exynos: Support SPI_PREAMBLE mode
Jagan Teki
- [U-Boot] [PATCH 2/2 V5] spi: exynos: Support SPI_PREAMBLE mode
Simon Glass
- [U-Boot] [PATCH 2/2] ARM: Congatec: Ethernet: Add support for cgtqmx6qeval
SARTRE Leo
- [U-Boot] [PATCH 2/2] ARM: Congatec: Ethernet: Add support for cgtqmx6qeval
Otavio Salvador
- [U-Boot] [PATCH 2/2] ARM: tegra: enable LCD panel on Ventana
Stephen Warren
- [U-Boot] [PATCH 2/2] board/bsc9132qds: Configure DSP DDR controller
Priyanka Jain
- [U-Boot] [PATCH 2/2] dfu:ext4:fix Fix DFU upload functionality
Lukasz Majewski
- [U-Boot] [PATCH 2/2] gpio: adi_gpio2: Unreserve gpio in special_gpio_free()
Axel Lin
- [U-Boot] [PATCH 2/2] gpio: adi_gpio2: Unreserve gpio in special_gpio_free()
Sonic Zhang
- [U-Boot] [PATCH 2/2] I2C: mxc_i2c: Add support for Vybrid VF610 platform
Alison Wang
- [U-Boot] [PATCH 2/2] LaCie/common: Fix cloudbox ethernet leds
Frederic Leroy
- [U-Boot] [PATCH 2/2] LaCie/common: Fix cloudbox ethernet leds
Wolfgang Denk
- [U-Boot] [PATCH 2/2] LaCie/common: Fix cloudbox ethernet leds
Simon Guinot
- [U-Boot] [PATCH 2/2] mx6qsabreauto: Add Port Expander reset
Stefano Babic
- [U-Boot] [PATCH 2/2] OMAP: gpio: Introduce get_omap_gpio_count() function to get gpio count
Axel Lin
- [U-Boot] [PATCH 2/2] OMAP: gpio: Introduce get_omap_gpio_count() function to get gpio count
Lubomir Popov
- [U-Boot] [PATCH 2/2] phy: smsc: LAN8710/8720 are not Gbit PHYs
Fabio Estevam
- [U-Boot] [PATCH 2/2] power: exynos-tmu: use the mux_addr bit fields in tmu_control register
Minkyu Kang
- [U-Boot] [PATCH 2/2] powerpc/c29xpcie: add support for C29XPCIE board
Andy Fleming
- [U-Boot] [PATCH 2/2] powerpc/c29xpcie: add support for C29XPCIE board
Po Liu
- [U-Boot] [PATCH 2/2] powerpc/c29xpcie: add support for C29XPCIE board
Scott Wood
- [U-Boot] [PATCH 2/2] PPC MPC83xx: Fix MPC8323ERDB build warning
Wolfgang Denk
- [U-Boot] [PATCH 2/2] PPC MPC83xx: Fix MPC8323ERDB build warning
Wolfgang Denk
- [U-Boot] [PATCH 2/2] PPC MPC83xx: Fix MPC8323ERDB build warning
Wolfgang Denk
- [U-Boot] [PATCH 2/2] PPC MPC83xx: Fix MPC8323ERDB build warning
Andy Fleming
- [U-Boot] [PATCH 2/2] PPC MPC83xx: Fix MPC8323ERDB build warning
Timur Tabi
- [U-Boot] [PATCH 2/2] PPC MPC83xx: Fix MPC8323ERDB build warning
Sinan Akman
- [U-Boot] [PATCH 2/2] pxa: fix memory coherency problem after relocation
Mike Dunn
- [U-Boot] [PATCH 2/2] pxa: fix memory coherency problem after relocation
Marek Vasut
- [U-Boot] [PATCH 2/2] pxa: fix memory coherency problem after relocation
Albert ARIBAUD
- [U-Boot] [PATCH 2/2] Revert "Refactor the bootm command to reduce code duplication"
Simon Glass
- [U-Boot] [PATCH 2/2] spi: mxc_spi: Use DIV_ROUND_UP at appropriate places
Jagan Teki
- [U-Boot] [PATCH 2/2] spi: mxc_spi: Use DIV_ROUND_UP at appropriate places
Jagan Teki
- [U-Boot] [PATCH 2/2] spi: mxc_spi: Use DIV_ROUND_UP at appropriate places
Axel Lin
- [U-Boot] [PATCH 2/2] spi: tegra20_sflash: Remove redundant code to set bus and cs of struct spi_slave
Marek Vasut
- [U-Boot] [PATCH 2/2] spi: tegra20_sflash: Remove redundant code to set bus and cs of struct spi_slave
Axel Lin
- [U-Boot] [PATCH 2/2] spi: tegra20_sflash: Remove redundant code to set bus and cs of struct spi_slave
Jagan Teki
- [U-Boot] [PATCH 2/2] vf610twr: Remove SoC name from U-Boot prompt
Andy Voltz
- [U-Boot] [PATCH 2/2] vf610twr: Remove SoC name from U-Boot prompt
Otavio Salvador
- [U-Boot] [PATCH 2/2] video: lcd: Make splash_screen_prepare weak, remove config macro
Robert Winkler
- [U-Boot] [PATCH 2/3] am33xx: Correct NON_SECURE_SRAM_START/END
Tom Rini
- [U-Boot] [PATCH 2/3] arm: omap3: spl: Fix problem with 8bit NAND devices
Stefan Roese
- [U-Boot] [PATCH 2/3] LaCie/common: add support for the GPIO extension bus
Simon Guinot
- [U-Boot] [PATCH 2/3] LaCie/common: add support for the GPIO extension bus
Prafulla Wadaskar
- [U-Boot] [PATCH 2/3] LaCie/common: add support for the GPIO extension bus
Simon Guinot
- [U-Boot] [PATCH 2/3] LaCie/common: add support for the GPIO extension bus
Prafulla Wadaskar
- [U-Boot] [PATCH 2/3] mtd: cfi_flash: Use ARRAY_SIZE at appropriate places
Axel Lin
- [U-Boot] [PATCH 2/3] powerpc/b4860: Correct LIODN assignment for SRIO
Liu Gang
- [U-Boot] [PATCH 2/3] tools/proftool: add missing definition
Andreas Bießmann
- [U-Boot] [PATCH 2/3] video: lcd: Make splash_screen_prepare weak, remove config macro
Robert Winkler
- [U-Boot] [PATCH 2/3] video: lcd: Make splash_screen_prepare weak, remove config macro
Igor Grinberg
- [U-Boot] [PATCH 2/4 V6] EXYNOS5: FDT: Add serial device node values
Minkyu Kang
- [U-Boot] [PATCH 2/4 V6] EXYNOS5: FDT: Add serial device node values
Rajeshwari Birje
- [U-Boot] [PATCH 2/4 V6] EXYNOS5: FDT: Add serial device node values
Rajeshwari Shinde
- [U-Boot] [PATCH 2/4 V7] EXYNOS5: FDT: Add serial device node values
Rajeshwari Shinde
- [U-Boot] [PATCH 2/4] ARM: AM33xx: Cleanup clocks layer
Lokesh Vutla
- [U-Boot] [PATCH 2/4] ARM: AM33xx: Cleanup clocks layer
Heiko Schocher
- [U-Boot] [PATCH 2/4] ARM: at91: sama5d3: remove unused definition about PMECC alpha table offset
Josh Wu
- [U-Boot] [PATCH 2/4] arm:goni:dfu Add support for DFU at GONI target
Sumit Gemini
- [U-Boot] [PATCH 2/4] arm:goni:dfu Add support for DFU at GONI target
Sumit Gemini
- [U-Boot] [PATCH 2/4] arm:goni:dfu Add support for DFU at GONI target
Sumit Gemini
- [U-Boot] [PATCH 2/4] arm:goni:dfu Add support for DFU at GONI target
Minkyu Kang
- [U-Boot] [PATCH 2/4] arm:goni:dfu Add support for DFU at GONI target
Lukasz Majewski
- [U-Boot] [PATCH 2/4] arm:goni:dfu Add support for DFU at GONI target
Lukasz Majewski
- [U-Boot] [PATCH 2/4] arm:goni:dfu Add support for DFU at GONI target
Lukasz Majewski
- [U-Boot] [PATCH 2/4] imx: nitrogen6x: Enable bootz
Robert Winkler
- [U-Boot] [PATCH 2/4] imx: nitrogen6x: Enable bootz
Robert Winkler
- [U-Boot] [PATCH 2/4] MIPS: mips64/interrupt.c: remove superfluous include
Gabor Juhos
- [U-Boot] [PATCH 2/4] nds32: Add bitwise operation macros for drivers
Kuan-Yu Kuo
- [U-Boot] [PATCH 2/4] sf: Place the sf calls in proper order
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH 2/4] usb:composite: use memcpy to avoid unaligned access
Marek Vasut
- [U-Boot] [PATCH 2/4] usb:composite: use memcpy to avoid unaligned access
Heiko Schocher
- [U-Boot] [PATCH 2/6] ARM: add assembly routine to switch to non-secure state
Christoffer Dall
- [U-Boot] [PATCH 2/6] mx6qsabrelite: Change default environment to cope with OE changes
Otavio Salvador
- [U-Boot] [PATCH 2/6] README: mx28_common: Do not hardcode the SSP port
Stefano Babic
- [U-Boot] [PATCH 2/7 v6] spl: env_common.c: add new symbol CONFIG_SPL_ENV_IMPORT to contain function env_import
ying.zhang at freescale.com
- [U-Boot] [PATCH 2/8 v2] powerpc/mpc85xx: modify the functionality clear_bss and aligning the end address of the BSS
ying.zhang at freescale.com
- [U-Boot] [PATCH 2/8] dts/Makefile: simplify dtc invocation
Stephen Warren
- [U-Boot] [PATCH 2/8] dts/Makefile: simplify dtc invocation
Simon Glass
- [U-Boot] [PATCH 2/8] dts/Makefile: simplify dtc invocation
Stephen Warren
- [U-Boot] [PATCH 3/3] am33xx/omap: Move save_omap_boot_params to omap-common/boot-common.c
Sricharan R
- [U-Boot] [PATCH 3/3] arm: omap3: Add SPL support to cm_t35
Stefan Roese
- [U-Boot] [PATCH 3/3] arm: omap3: Add SPL support to cm_t35
Igor Grinberg
- [U-Boot] [PATCH 3/3] arm: omap3: Add SPL support to cm_t35
Tom Rini
- [U-Boot] [PATCH 3/3] arm: omap3: Add SPL support to cm_t35
Igor Grinberg
- [U-Boot] [PATCH 3/3] arm: omap3: Add SPL support to cm_t35
Stefan Roese
- [U-Boot] [PATCH 3/3] Makefile: fix readelf usage
Andreas Bießmann
- [U-Boot] [PATCH 3/3] net2big_v2: initialize LEDs at startup
Simon Guinot
- [U-Boot] [PATCH 3/3] omap: cm_t35: Fix cm_t35 for weak splash_screen_prepare
Robert Winkler
- [U-Boot] [PATCH 3/3] omap: cm_t35: Fix cm_t35 for weak splash_screen_prepare
Igor Grinberg
- [U-Boot] [PATCH 3/3] omap: cm_t35: Fix cm_t35 for weak splash_screen_prepare
Robert Winkler
- [U-Boot] [PATCH 3/3] omap: cm_t35: Fix cm_t35 for weak splash_screen_prepare
Igor Grinberg
- [U-Boot] [PATCH 3/3] powerpc/t4: Correct LIODN assignment for SRIO
Liu Gang
- [U-Boot] [PATCH 3/3] usb: musb: Use ARRAY_SIZE at appropriate places
Axel Lin
- [U-Boot] [PATCH 3/4 V5] S5P: Serial: Add fdt support to driver
Minkyu Kang
- [U-Boot] [PATCH 3/4 V6] S5P: Serial: Add fdt support to driver
Rajeshwari Shinde
- [U-Boot] [PATCH 3/4 V7] S5P: Serial: Add fdt support to driver
Rajeshwari Shinde
- [U-Boot] [PATCH 3/4] ARM: AM33xx: Move s_init to a common place
Lokesh Vutla
- [U-Boot] [PATCH 3/4] ARM: AM33xx: Move s_init to a common place
Heiko Schocher
- [U-Boot] [PATCH 3/4] ARM: AM33xx: Move s_init to a common place
Tom Rini
- [U-Boot] [PATCH 3/4] ARM: AM33xx: Move s_init to a common place
Heiko Schocher
- [U-Boot] [PATCH 3/4] ARM: AM33xx: Move s_init to a common place
Sumit Gemini
- [U-Boot] [PATCH 3/4] ARM: AM33xx: Move s_init to a common place
Heiko Schocher
- [U-Boot] [PATCH 3/4] arm:goni: Update of GONI partitioning scheme at eMMC
Lukasz Majewski
- [U-Boot] [PATCH 3/4] imx: nitrogen6x: Enable raw initrd
Robert Winkler
- [U-Boot] [PATCH 3/4] imx: nitrogen6x: Enable raw initrd
Robert Winkler
- [U-Boot] [PATCH 3/4] MIPS: remove obsolete TODO items
Gabor Juhos
- [U-Boot] [PATCH 3/4] mtd: atmel_nand: alloc memory instead of use static array for pmecc data
Josh Wu
- [U-Boot] [PATCH 3/4] mtd: atmel_nand: alloc memory instead of use static array for pmecc data
Scott Wood
- [U-Boot] [PATCH 3/4] nds32: Enable SDIO and EXT2 command support for Andes board
Kuan-Yu Kuo
- [U-Boot] [PATCH 3/4] sf: Add debug messages on spi_flash_read_common
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH 3/6] ARM: switch to non-secure state during bootm execution
Christoffer Dall
- [U-Boot] [PATCH 3/6] mx6slevk: Change default environment to cope with OE changes
Otavio Salvador
- [U-Boot] [PATCH 3/6] README: mx28_common: Fix structure of sentence
Stefano Babic
- [U-Boot] [PATCH 3/7 v6] powerpc/p1022ds: boot from SD Card with SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH 3/8] dts/Makefile: unify cpp/dtc include paths
Stephen Warren
- [U-Boot] [PATCH 3/8] dts/Makefile: unify cpp/dtc include paths
Simon Glass
- [U-Boot] [PATCH 3/8] dts/Makefile: unify cpp/dtc include paths
Stephen Warren
- [U-Boot] [PATCH 3/8] dts/Makefile: unify cpp/dtc include paths
Simon Glass
- [U-Boot] [PATCH 4/4 V6] CONFIG: EXYNOS5: Enable silent console
Rajeshwari Shinde
- [U-Boot] [PATCH 4/4 V7] CONFIG: EXYNOS5: Enable silent console
Rajeshwari Shinde
- [U-Boot] [PATCH 4/4] ARM: at91: atmel_nand: add code to check the ONFI parameter ECC requirement
Josh Wu
- [U-Boot] [PATCH 4/4] ARM: at91: atmel_nand: add code to check the ONFI parameter ECC requirement
Scott Wood
- [U-Boot] [PATCH 4/4] arm:goni: Add support for USB mass storage
Lukasz Majewski
- [U-Boot] [PATCH 4/4] EXYNOS: Move files from board/samsung to arch/arm.
Rajeshwari Birje
- [U-Boot] [PATCH 4/4] EXYNOS: Move files from board/samsung to arch/arm.
Minkyu Kang
- [U-Boot] [PATCH 4/4] EXYNOS: Move files from board/samsung to arch/arm.
Rajeshwari Birje
- [U-Boot] [PATCH 4/4] imx: nitrogen6x: Enable filesystem generic commands
Robert Winkler
- [U-Boot] [PATCH 4/4] imx: nitrogen6x: Enable filesystem generic commands
Robert Winkler
- [U-Boot] [PATCH 4/4] MIPS: mips32/cache.S: remove superfluous register assignment
Gabor Juhos
- [U-Boot] [PATCH 4/4] musb: Disable extra prints
Lokesh Vutla
- [U-Boot] [PATCH 4/4] musb: Disable extra prints
Heiko Schocher
- [U-Boot] [PATCH 4/4] nds32: Enable the function of passing parameters to Linux
Kuan-Yu Kuo
- [U-Boot] [PATCH 4/4] sf: Warn to use BAR for > 16MiB flashes
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH 4/4] sf: Warn to use BAR for > 16MiB flashes
Simon Glass
- [PATCH 4/5] drivers: mtd: spi: Modify read/write command for sfl256s flash.
Sourav Poddar
- [U-Boot] [PATCH 4/6] ARM: add SMP support for non-secure switch
Christoffer Dall
- [U-Boot] [PATCH 4/6] ARM: add SMP support for non-secure switch
TigerLiu at viatech.com.cn
- [U-Boot] [PATCH 4/6] Makefile: move the common makefile line to public area
Zhang Ying-B40530
- [U-Boot] [PATCH 4/6] Makefile: move the common makefile line to public area
Tom Rini
- [U-Boot] [PATCH 4/6] README: mxs: Introduce README.mxs
Stefano Babic
- [U-Boot] [PATCH 4/6] wandboard: Change default environment to cope with OE changes
Otavio Salvador
- [U-Boot] [PATCH 4/7 v6] SPL : spi flash : support to start from eSPI with SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH 4/8] dt: don't use ARCH_CPU_DTS
Stephen Warren
- [U-Boot] [PATCH 4/8] dt: don't use ARCH_CPU_DTS
Simon Glass
- [U-Boot] [PATCH 5/6] ARM: extend non-secure switch to also go into HYP mode
Christoffer Dall
- [U-Boot] [PATCH 5/6] mx28evk: Move README file inside board directory
Stefano Babic
- [U-Boot] [PATCH 5/6] mx28evk: Move README file inside board directory
Otavio Salvador
- [U-Boot] [PATCH 5/6] mx28evk: Move README file inside board directory
Marek Vasut
- [U-Boot] [PATCH 5/6] mx51evk: Change default environment to cope with OE changes
Otavio Salvador
- [U-Boot] [PATCH 5/7 v6] powerpc : p1022ds : enable p1022ds to start from eSPI with SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH 5/8] dts/Makefile: don't define ARCH_CPU_DTS, BOARD_DTS
Stephen Warren
- [U-Boot] [PATCH 5/8] dts/Makefile: don't define ARCH_CPU_DTS, BOARD_DTS
Simon Glass
- [U-Boot] [PATCH 5/8] powerpc: spl: deleted unused symbol CONFIG_SPL_NAND_MINIMAL and introduced new symbol CONFIG_SPL_MINIMAL
ying.zhang at freescale.com
- [U-Boot] [PATCH 5/8] powerpc: spl: deleted unused symbol CONFIG_SPL_NAND_MINIMAL and introduced new symbol CONFIG_SPL_MINIMAL
Scott Wood
- [U-Boot] [PATCH 5/8] powerpc: spl: deleted unused symbol CONFIG_SPL_NAND_MINIMAL and introduced new symbol CONFIG_SPL_MINIMAL
Zhang Ying-B40530
- [U-Boot] [PATCH 5/8] powerpc: spl: deleted unused symbol CONFIG_SPL_NAND_MINIMAL and introduced new symbol CONFIG_SPL_MINIMAL
Scott Wood
- [U-Boot] [PATCH 5/8] powerpc: spl: deleted unused symbol CONFIG_SPL_NAND_MINIMAL and introduced new symbol CONFIG_SPL_MINIMAL
Zhang Ying-B40530
- [U-Boot] [PATCH 6/6] m28evk: Move README file inside board directory
Stefano Babic
- [U-Boot] [PATCH 6/6] mx53ard: Change default environment to cope with OE changes
Otavio Salvador
- [U-Boot] [PATCH 6/7 v6] nand: tpl : introduce the TPL based on the SPL
Scott Wood
- [U-Boot] [PATCH 6/7 v6] nand: tpl : introduce the TPL based on the SPL
Zhang Ying-B40530
- [U-Boot] [PATCH 6/7 v6] nand: tpl : introduce the TPL based on the SPL
Scott Wood
- [U-Boot] [PATCH 6/7 v6] nand: tpl : introduce the TPL based on the SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH 6/8 v2] spl: env_common.c: make CONFIG_SPL_BUILD contain function env_import
ying.zhang at freescale.com
- [U-Boot] [PATCH 6/8] config: don't define CONFIG_ARCH_DEVICE_TREE
Jagan Teki
- [U-Boot] [PATCH 6/8] config: don't define CONFIG_ARCH_DEVICE_TREE
Stephen Warren
- [U-Boot] [PATCH 6/8] config: don't define CONFIG_ARCH_DEVICE_TREE
Simon Glass
- [U-Boot] [PATCH 6/8] config: don't define CONFIG_ARCH_DEVICE_TREE
Stephen Warren
- [U-Boot] [PATCH 7/7 v6] powerpc: p1022ds: support TPL on the P1022DS
Scott Wood
- [U-Boot] [PATCH 7/7 v6] powerpc: p1022ds: support TPL on the P1022DS
ying.zhang at freescale.com
- [U-Boot] [PATCH 7/8] dts/Makefile: don't use cpp -P
Stephen Warren
- [U-Boot] [PATCH 7/8] dts/Makefile: don't use cpp -P
Simon Glass
- [U-Boot] [PATCH 8/8] dts/Makefile: pass -undef -D__DTS__ to cpp
Stephen Warren
- [U-Boot] [PATCH 8/8] dts/Makefile: pass -undef -D__DTS__ to cpp
Simon Glass
- [U-Boot] [PATCH 8/8] powerpc/p1022ds: boot from spi flash with SPL
Andy Fleming
- [U-Boot] [PATCH 8/8] powerpc/p1022ds: boot from spi flash with SPL
Zhang Ying-B40530
- [U-Boot] [PATCH 8/8] powerpc/p1022ds: boot from spi flash with SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH RESEND] mx27: add i2c clock
Philippe Reynes
- [U-Boot] [PATCH RESEND] mx27: add i2c clock
Stefano Babic
- [U-Boot] [PATCH RESEND] video: exynos: change mipi dsi write function parameters correctly
Donghwa Lee
- [U-Boot] [PATCH RFC] NET: TSEC: make PHY addresses software configurable
Wolfgang Denk
- [U-Boot] [PATCH RFC] NET: TSEC: make PHY addresses software configurable
Andy Fleming
- [U-Boot] [PATCH V1 1/1] EXYNOS5: I2C: Add FDT and non-FDT support for I2C
Minkyu Kang
- [U-Boot] [PATCH v1 1/1] mpc512x: adjust and improve AC14xx board support
Wolfgang Denk
- [U-Boot] [PATCH v1 1/1] mpc512x: adjust and improve AC14xx board support
Wolfgang Denk
- [U-Boot] [PATCH v1 1/1] mpc512x: adjust and improve AC14xx board support
Gerhard Sittig
- [U-Boot] [PATCH v1 1/1] mpc512x: adjust and improve AC14xx board support
Stefano Babic
- [U-Boot] [PATCH v1 1/1] mpc512x: adjust and improve AC14xx board support
Gerhard Sittig
- [U-Boot] [PATCH v1 1/1] mpc512x: adjust and improve AC14xx board support
Gerhard Sittig
- [U-Boot] [PATCH v1 1/1] patman: README documentation nits
Gerhard Sittig
- [U-Boot] [PATCH v1 1/1] patman: README documentation nits
Simon Glass
- [U-Boot] [PATCH v2 0/21] Add tracing functionality to U-Boot
Simon Glass
- [U-Boot] [PATCH v2 0/21] Add tracing functionality to U-Boot
Tom Rini
- [U-Boot] [PATCH v2 0/2] Add Arndale board support
Inderpal Singh
- [U-Boot] [PATCH v2 0/2] SPI flash update command
Gerlando Falauto
- [U-Boot] [PATCH v2 0/3] Add ethernet support for Congatec qmx6qeval
SARTRE Leo
- [U-Boot] [PATCH v2 0/3] Add ethernet support for Congatec qmx6qeval
Albert ARIBAUD
- [U-Boot] [PATCH v2 0/3] net2big_v2: initialize fan and LEDs at startup
Simon Guinot
- [U-Boot] [PATCH v2 0/3] net2big_v2: initialize fan and LEDs at startup
Prafulla Wadaskar
- [U-Boot] [PATCH v2 0/3] net2big_v2: initialize fan and LEDs at startup
Prafulla Wadaskar
- [U-Boot] [PATCH v2 0/4] arm: add support for LaCie CloudBox
Frédéric Leroy
- [U-Boot] [PATCH v2 0/4] imx: nitrogen6x: Config changes
Robert Winkler
- [U-Boot] [PATCH v2 0/4] imx: nitrogen6x: Config changes
Stefano Babic
- [U-Boot] [PATCH v2 0/5] ARM: at91: atmel_nand: check ONFI ecc minimum requirement
Josh Wu
- [U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function
Sricharan R
- [U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function
Sricharan R
- [U-Boot] [PATCH v2 0/5] env: Add support for environment files
Simon Glass
- [U-Boot] [PATCH v2 0/7] ARMv7: Add HYP mode switching support
Andre Przywara
- [U-Boot] [PATCH v2 0/7] cleanup in the 'ifm AC14xx' board support
Gerhard Sittig
- [U-Boot] [PATCH v2 0/7] cleanup in the 'ifm AC14xx' board support
Gerhard Sittig
- [U-Boot] [PATCH V2 0/9] rely on latest dtc, simplify
Stephen Warren
- [U-Boot] [PATCH V2 0/9] rely on latest dtc, simplify
Tom Rini
- [U-Boot] [PATCH V2 00/12] ARM: DRA7xx: Update support for DRA7xx Soc's
Lokesh Vutla
- [U-Boot] [PATCH V2 00/12] ARM: DRA7xx: Update support for DRA7xx Soc's
Tom Rini
- [U-Boot] [PATCH V2 00/12] ARM: DRA7xx: Update support for DRA7xx Soc's
Lubomir Popov
- [U-Boot] [PATCH V2 00/12] ARM: DRA7xx: Update support for DRA7xx Soc's
Lokesh Vutla
- [U-Boot] [PATCH v2 00/16] sf: Update sf framework to support all sizes of flashes
Jagan Teki
- [U-Boot] [PATCH v2 01/10] ARM: move interrupt_init to before relocation
Rob Herring
- [U-Boot] [PATCH v2 01/11] MIPS: bootm: fix checkpatch.pl warnings
Daniel Schwierzeck
- [U-Boot] [PATCH v2 01/21] pci: Convert extern inline functions to static inline
Simon Glass
- [U-Boot] [PATCH v2 02/10] net: calxedaxgmac: enable rx cut-thru
Rob Herring
- [U-Boot] [PATCH v2 02/21] x86: Correct missing local variable in bootm
Simon Glass
- [U-Boot] [PATCH v2 03/10] ARM: highbank: update config options
Rob Herring
- [U-Boot] [PATCH v2 03/21] Fix missing return in do_mem_loop()
Simon Glass
- [U-Boot] [PATCH v2 04/10] ARM: highbank: fix get_tbclk value to timer rate
Rob Herring
- [U-Boot] [PATCH v2 04/11] MIPS: bootm: refactor initialisation of kernel cmdline
Daniel Schwierzeck
- [U-Boot] [PATCH v2 04/21] Show stdout on error in fit-test
Simon Glass
- [U-Boot] [PATCH v2 05/10] ARM: highbank: set timer prescaler to 256
Rob Herring
- [U-Boot] [PATCH v2 05/21] bootstage: Correct printf types
Simon Glass
- [U-Boot] [PATCH v2 06/10] ARM: highbank: avoid bss write in timer_init
Rob Herring
- [U-Boot] [Patch v2 06/11] powerpc/T4240EMU: Add T4240EMU target
York Sun
- [U-Boot] [Patch v2 06/11] powerpc/T4240EMU: Add T4240EMU target
Wolfgang Denk
- [U-Boot] [Patch v2 06/11] powerpc/T4240EMU: Add T4240EMU target
York Sun
- [U-Boot] [Patch v2 06/11] powerpc/T4240EMU: Add T4240EMU target
Scott Wood
- [U-Boot] [Patch v2 06/11] powerpc/T4240EMU: Add T4240EMU target
York Sun
- [U-Boot] [Patch v2 06/11] powerpc/T4240EMU: Add T4240EMU target
Wolfgang Denk
- [U-Boot] [Patch v2 06/11] powerpc/T4240EMU: Add T4240EMU target
York Sun
- [U-Boot] [PATCH v2 06/16] sf: Update sf to support all sizes of flashes
Simon Glass
- [U-Boot] [PATCH v2 06/16] sf: Update sf to support all sizes of flashes
Jagan Teki
- [U-Boot] [PATCH v2 06/16] sf: Update sf to support all sizes of flashes
Simon Glass
- [U-Boot] [PATCH v2 06/16] sf: Update sf to support all sizes of flashes
Jagan Teki
- [U-Boot] [PATCH v2 06/16] sf: Update sf to support all sizes of flashes
Jagan Teki
- [U-Boot] [PATCH v2 06/16] sf: Update sf to support all sizes of flashes
Simon Glass
- [U-Boot] [PATCH v2 06/16] sf: Update sf to support all sizes of flashes
Jagan Teki
- [U-Boot] [PATCH v2 06/16] sf: Update sf to support all sizes of flashes
Simon Glass
- [U-Boot] [PATCH v2 06/16] sf: Update sf to support all sizes of flashes
Jagan Teki
- [U-Boot] [PATCH v2 06/16] sf: Update sf to support all sizes of flashes
Simon Glass
- [U-Boot] [PATCH v2 06/16] sf: Update sf to support all sizes of flashes
Jagan Teki
- [U-Boot] [PATCH v2 06/16] sf: Update sf to support all sizes of flashes
Tom Rini
- [U-Boot] [PATCH v2 06/21] Add function to print a number with grouped digits
Simon Glass
- [U-Boot] [PATCH v2 07/10] ARM: highbank: enable reset on command timeout
Rob Herring
- [U-Boot] [PATCH v2 07/10] MIPS: xburst/start.S: rework relocation info check
Gabor Juhos
- [U-Boot] [PATCH v2 07/21] Add trace library
Simon Glass
- [U-Boot] [PATCH v2 08/10] ARM: highbank: setup peripherals based on power domain status
Rob Herring
- [U-Boot] [PATCH v2 08/21] Add a trace command
Simon Glass
- [U-Boot] [PATCH v2 09/10] ARM: highbank: compile misc_init_r only if CONFIG_MISC_INIT_R
Rob Herring
- [U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Lokesh Vutla
- [U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Lubomir Popov
- [U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Lokesh Vutla
- [U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Tom Rini
- [U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Lokesh Vutla
- [U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Lubomir Popov
- [U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Tom Rini
- [U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Nishanth Menon
- [U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Lubomir Popov
- [U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Nishanth Menon
- [U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Lubomir Popov
- [U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Lubomir Popov
- [U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Lokesh Vutla
- [U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Lubomir Popov
- [U-Boot] [PATCH v2 09/21] Support tracing in config.mk when enabled
Simon Glass
- [U-Boot] [PATCH v2 1/1] socfpga: Adding System Manager driver which will configure the pin mux for real hardware Cyclone V
Wolfgang Denk
- [U-Boot] [PATCH v2 1/1] socfpga: Adding System Manager driver which will configure the pin mux for real hardware Cyclone V
Chin Liang See
- [U-Boot] [PATCH v2 1/1] socfpga: Consolidating reset code into reset_manager.c. Also separating reset configuration for virtual target and real hardware Cyclone V development kit
Wolfgang Denk
- [U-Boot] [PATCH v2 1/1] socfpga: Consolidating reset code into reset_manager.c. Also separating reset configuration for virtual target and real hardware Cyclone V development kit
Chin Liang See
- [U-Boot] [PATCH v2 1/1] socfpga: Separating the configuration file for Virtual Target and real hardware Cyclone V development kit
Wolfgang Denk
- [U-Boot] [PATCH v2 1/1] socfpga: Separating the configuration file for Virtual Target and real hardware Cyclone V development kit
Chin Liang See
- [U-Boot] [PATCH V2 1/2] ARM: tegra: enable LCD panel on Harmony
Stephen Warren
- [U-Boot] [PATCH v2 1/2] cmd_sf: let "sf update" erase last sector as a whole
Gerlando Falauto
- [U-Boot] [PATCH v2 1/2] exynos5250: Add arndale board support
Inderpal Singh
- [U-Boot] [PATCH v2 1/2] vf610twr: Add default environment in line with other Freescale boards
Otavio Salvador
- [U-Boot] [PATCH v2 1/2] vf610twr: Add default environment in line with other Freescale boards
Fabio Estevam
- [U-Boot] [PATCH v2 1/2] vf610twr: Add default environment in line with other Freescale boards
Otavio Salvador
- [U-Boot] [PATCH v2 1/2] vf610twr: Add default environment in line with other Freescale boards
Fabio Estevam
- [U-Boot] [PATCH v2 1/2] vf610twr: Add default environment in line with other Freescale boards
Otavio Salvador
- [U-Boot] [PATCH v2 1/2] vf610twr: Add default environment in line with other Freescale boards
Stefano Babic
- [U-Boot] [PATCH v2 1/2] vf610twr: Add default environment in line with other Freescale boards
Wang Huan-B18965
- [U-Boot] [PATCH v2 1/2] vf610twr: Add default environment in line with other Freescale boards
Stefano Babic
- [U-Boot] [PATCH v2 1/2] vf610twr: Add default environment in line with other Freescale boards
Otavio Salvador
- [U-Boot] [PATCH v2 1/3] arm: spl: Fix SPL booting for OMAP3
Stefan Roese
- [U-Boot] [PATCH v2 1/3] arm: spl: Fix SPL booting for OMAP3
Albert ARIBAUD
- [U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Marek Vasut
- [U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Marek Vasut
- [U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Marek Vasut
- [U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Marek Vasut
- [U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Marek Vasut
- [U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Marek Vasut
- [U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Marek Vasut
- [U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Jim Lin
- [U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Thierry Reding
- [U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Thierry Reding
- [U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Thierry Reding
- [U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Jim Lin
- [U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Thierry Reding
- [U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Thierry Reding
- [U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Stephen Warren
- [U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Thierry Reding
- [U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Stephen Warren
- [U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Stephen Warren
- [U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Stephen Warren
- [U-Boot] [PATCH v2 1/3] net2big_v2: initialize I2C fan at startup
Simon Guinot
- [U-Boot] [PATCH v2 1/3] PHY: micrel: helper function for KSZ9031
SARTRE Leo
- [U-Boot] [PATCH v2 1/3] PHY: micrel: helper function for KSZ9031
Otavio Salvador
- [U-Boot] [PATCH v2 1/4] imx: nitrogen6x: Enabled data cache
Robert Winkler
- [U-Boot] [PATCH v2 1/4] lacie_kw: sort #ifdef lists by CONFIG_ identifiers
Frédéric Leroy
- [U-Boot] [PATCH v2 1/4] sf: Unify spi_flash write code
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 1/5] ARM: at91: atmel_nand: pmecc driver will select the galois table by sector size
Josh Wu
- [U-Boot] [PATCH v2 1/5] sandbox: Support 'env import' and 'env export'
Simon Glass
- [U-Boot] [PATCH v2 1/7] ac14xx: fix a potential NULL deref in diagnostics
Gerhard Sittig
- [U-Boot] [PATCH v2 1/7] ac14xx: fix a potential NULL deref in diagnostics
Wolfgang Denk
- [U-Boot] [PATCH v2 1/7] ARM: prepare armv7.h to be included from assembly source
Masahiro Yamada
- [U-Boot] [PATCH v2 1/7] ARM: prepare armv7.h to be included from assembly source
Andre Przywara
- [U-Boot] [PATCH v2 1/8] sf: spansion: Update the name for S25FL256S flash
Jagan Teki
- [U-Boot] [PATCH V2 1/9] Validate dtc is new enough
Stephen Warren
- [U-Boot] [PATCH V2 1/9] Validate dtc is new enough
Simon Glass
- [U-Boot] [PATCH V2 1/9] Validate dtc is new enough
Stephen Warren
- [U-Boot] [PATCH V2 1/9] Validate dtc is new enough
Simon Glass
- [U-Boot] [PATCH V2 1/9] Validate dtc is new enough
Gerhard Sittig
- [U-Boot] [PATCH V2 1/9] Validate dtc is new enough
Stephen Warren
- [U-Boot] [PATCH v2 10/10] highbank: enable keyed autoboot stop
Rob Herring
- [U-Boot] [PATCH v2 10/21] Add trace support to generic board
Simon Glass
- [U-Boot] [PATCH v2 11/21] Add proftool to decode profile data
Simon Glass
- [U-Boot] [PATCH v2 12/21] sandbox: Support trace feature
Simon Glass
- [U-Boot] [PATCH v2 13/21] Add a simple test for sandbox trace
Simon Glass
- [U-Boot] [PATCH v2 14/16] sf: Use spi_flash_read_common() in write status poll
Simon Glass
- [U-Boot] [PATCH v2 14/21] Clarify bootm OS arguments
Simon Glass
- [U-Boot] [PATCH v2 15/21] Refactor the bootm command to reduce code duplication
Simon Glass
- [U-Boot] [PATCH v2 15/21] Refactor the bootm command to reduce code duplication
Stefan Roese
- [U-Boot] [PATCH v2 15/21] Refactor the bootm command to reduce code duplication
Tom Rini
- [U-Boot] [PATCH v2 15/21] Refactor the bootm command to reduce code duplication
Simon Glass
- [U-Boot] [PATCH v2 15/21] Refactor the bootm command to reduce code duplication
Simon Glass
- [U-Boot] [PATCH v2 15/21] Refactor the bootm command to reduce code duplication
Tom Rini
- [U-Boot] [PATCH v2 15/21] Refactor the bootm command to reduce code duplication
Simon Glass
- [U-Boot] [PATCH v2 15/21] Refactor the bootm command to reduce code duplication
Stefan Roese
- [U-Boot] [PATCH v2 15/21] Refactor the bootm command to reduce code duplication
Simon Glass
- [U-Boot] [PATCH v2 15/21] Refactor the bootm command to reduce code duplication
Simon Glass
- [U-Boot] [PATCH v2 15/21] Refactor the bootm command to reduce code duplication
Stefan Roese
- [U-Boot] [PATCH v2 15/21] Refactor the bootm command to reduce code duplication
Simon Glass
- [U-Boot] [PATCH v2 15/21] Refactor the bootm command to reduce code duplication
Simon Glass
- [U-Boot] [PATCH v2 16/16] sf: Add Flag status register polling support
Jagan Teki
- [U-Boot] [PATCH v2 16/16] sf: Add Flag status register polling support
Simon Glass
- [U-Boot] [PATCH v2 16/16] sf: Add Flag status register polling support
Jagan Teki
- [U-Boot] [PATCH v2 16/16] sf: Add Flag status register polling support
Simon Glass
- [U-Boot] [PATCH v2 16/16] sf: Add Flag status register polling support
Jagan Teki
- [U-Boot] [PATCH v2 16/16] sf: Add Flag status register polling support
Jagan Teki
- [U-Boot] [PATCH v2 16/16] sf: Add Flag status register polling support
Simon Glass
- [U-Boot] [PATCH v2 16/16] sf: Add Flag status register polling support
Jagan Teki
- [U-Boot] [PATCH v2 16/21] Add a 'fake' go command to the bootm command
Simon Glass
- [U-Boot] [PATCH v2 17/21] arm: Implement the 'fake' go command
Simon Glass
- [U-Boot] [PATCH v2 17/21] arm: Implement the 'fake' go command
Albert ARIBAUD
- [U-Boot] [PATCH v2 17/21] arm: Implement the 'fake' go command
Simon Glass
- [U-Boot] [PATCH v2 17/21] arm: Implement the 'fake' go command
Albert ARIBAUD
- [U-Boot] [PATCH v2 17/21] arm: Implement the 'fake' go command
Simon Glass
- [U-Boot] [PATCH v2 17/21] arm: Implement the 'fake' go command
Albert ARIBAUD
- [U-Boot] [PATCH v2 17/21] arm: Implement the 'fake' go command
Simon Glass
- [U-Boot] [PATCH v2 18/21] exynos: Avoid function instrumentation for microsecond timer
Simon Glass
- [U-Boot] [PATCH v2 19/21] exynos: config: Add tracing options
Simon Glass
- [U-Boot] [PATCH V2 2/2] ARM: tegra: enable LCD panel on Ventana
Stephen Warren
- [U-Boot] [PATCH v2 2/2] cmd_sf: "sf update" preserve the final part of the last sector
Gerlando Falauto
- [U-Boot] [PATCH v2 2/2] exynos5250: arndale: Add mmc support
Inderpal Singh
- [U-Boot] [PATCH v2 2/2] vf610twr: Remove SoC name from U-Boot prompt
Otavio Salvador
- [U-Boot] [PATCH v2 2/3] ARM: Congatec: Ethernet: Add support for cgtqmx6qeval
Otavio Salvador
- [U-Boot] [PATCH v2 2/3] ARM: Congatec: Ethernet: Add support for cgtqmx6qeval
SARTRE Leo
- [U-Boot] [PATCH v2 2/3] ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114
Jim Lin
- [U-Boot] [PATCH v2 2/3] LaCie/common: add support for the CPLD GPIO bus
Simon Guinot
- [U-Boot] [PATCH v2 2/4] arm: add support for LaCie CloudBox
Frédéric Leroy
- [U-Boot] [PATCH v2 2/4] arm:goni:dfu Add support for DFU at GONI target
Lukasz Majewski
- [U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices
Bo Shen
- [U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices
Joe Hershberger
- [U-Boot] [PATCH v2 2/4] sf: Place the sf calls in proper order
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 2/5] ARM: at91: sama5d3: remove unused definition about PMECC alpha table offset
Josh Wu
- [U-Boot] [PATCH v2 2/5] Make 'run' use run_command_list() instead of run_command()
Simon Glass
- [U-Boot] [PATCH v2 2/7] ac14xx: cleanup comments in the board support
Gerhard Sittig
- [U-Boot] [PATCH v2 2/7] ac14xx: cleanup comments in the board support
Wolfgang Denk
- [U-Boot] [PATCH v2 2/7] ARM: add secure monitor handler to switch to non-secure state
Masahiro Yamada
- [U-Boot] [PATCH v2 2/7] ARM: add secure monitor handler to switch to non-secure state
Andre Przywara
- [U-Boot] [PATCH v2 2/8] sf: spansion: Add support for S25FL128S_64K
Jagan Teki
- [U-Boot] [PATCH V2 2/9] xilinx: move microblaze-generic .dts to standard location
Stephen Warren
- [U-Boot] [PATCH v2 20/21] x86: Support tracing function
Simon Glass
- [U-Boot] [PATCH v2 21/21] x86: config: Add tracing options
Simon Glass
- [U-Boot] [PATCH v2 3/3] ARM: Congatec: README update
SARTRE Leo
- [U-Boot] [PATCH v2 3/3] ARM: Congatec: README update
Otavio Salvador
- [U-Boot] [PATCH v2 3/3] arm: omap3: Add SPL support to cm_t35
Stefan Roese
- [U-Boot] [PATCH v2 3/3] arm: omap3: Add SPL support to cm_t35
Nikita Kiryanov
- [U-Boot] [PATCH v2 3/3] net2big_v2: initialize LEDs at startup
Simon Guinot
- [U-Boot] [PATCH v2 3/3] Tegra: Config: Enable Tegra30/Tegra114 USB function
Jim Lin
- [U-Boot] [PATCH v2 3/4] LaCie/common: Fix cloudbox ethernet leds
Frédéric Leroy
- [U-Boot] [PATCH v2 3/4] sf: Add debug messages on spi_flash_read_common
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 3/5] Allow U-Boot scripts to be placed in a .env file
Simon Glass
- [U-Boot] [PATCH v2 3/5] Allow U-Boot scripts to be placed in a .env file
Stephen Warren
- [U-Boot] [PATCH v2 3/5] linux/compat.h: move dev_err, dev_info and dev_dbg from usb driver to compat.h
Josh Wu
- [U-Boot] [PATCH v2 3/7] ac14xx: minor improvement in diagnostics
Gerhard Sittig
- [U-Boot] [PATCH v2 3/7] ac14xx: minor improvement in diagnostics
Wolfgang Denk
- [U-Boot] [PATCH v2 3/7] ARM: add assembly routine to switch to non-secure state
Andre Przywara
- [U-Boot] [PATCH v2 3/7] ARM: add assembly routine to switch to non-secure state
Masahiro Yamada
- [U-Boot] [PATCH v2 3/7] ARM: add assembly routine to switch to non-secure state
Christoffer Dall
- [U-Boot] [PATCH v2 3/8] sf: winbond: Add support for W25Q80BW
Jagan Teki
- [U-Boot] [PATCH V2 3/9] dts/Makefile: simplify dtc invocation
Stephen Warren
- [U-Boot] [PATCH V2 3/9] dts/Makefile: simplify dtc invocation
Simon Glass
- [U-Boot] [PATCH v2 4/4] arm: add machine ID for CloudBox
Frédéric Leroy
- [U-Boot] [PATCH v2 4/4] sf: Warn to use BAR for > 16MiB flashes
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v2 4/5] env: Allow environment files to use the C preprocessor
Simon Glass
- [U-Boot] [PATCH v2 4/5] env: Allow environment files to use the C preprocessor
Stephen Warren
- [U-Boot] [PATCH v2 4/5] mtd: atmel_nand: alloc memory instead of use static array for pmecc data
Josh Wu
- [U-Boot] [PATCH v2 4/7] ac14xx: re-order the recovery condition checks
Gerhard Sittig
- [U-Boot] [PATCH v2 4/7] ac14xx: re-order the recovery condition checks
Wolfgang Denk
- [U-Boot] [PATCH v2 4/7] ARM: switch to non-secure state during bootm execution
Andre Przywara
- [U-Boot] [PATCH v2 4/7] ARM: switch to non-secure state during bootm execution
Masahiro Yamada
- [U-Boot] [PATCH v2 4/7] ARM: switch to non-secure state during bootm execution
Christoffer Dall
- [U-Boot] [PATCH v2 4/8] sf: winbond: Correct the nr_blocks used for W25Q32DW
Jagan Teki
- [U-Boot] [PATCH V2 4/9] dts/Makefile: unify cpp/dtc include paths
Stephen Warren
- [U-Boot] [PATCH v2 5/5] ARM: at91: atmel_nand: add code to check the ONFI parameter ECC requirement
Josh Wu
- [U-Boot] [PATCH v2 5/5] ARM: at91: atmel_nand: add code to check the ONFI parameter ECC requirement
Scott Wood
- [U-Boot] [PATCH v2 5/5] ARM: at91: atmel_nand: add code to check the ONFI parameter ECC requirement
Josh Wu
- [U-Boot] [PATCH v2 5/5] ARM: at91: atmel_nand: add code to check the ONFI parameter ECC requirement
Scott Wood
- [U-Boot] [PATCH v2 5/5] RFC: tegra: Convert to using environment files
Stephen Warren
- [U-Boot] [PATCH v2 5/5] RFC: tegra: Convert to using environment files
Simon Glass
- [U-Boot] [PATCH v2 5/7] ac14xx: remove obsolete board config items
Wolfgang Denk
- [U-Boot] [PATCH v2 5/7] ac14xx: remove obsolete board config items
Gerhard Sittig
- [U-Boot] [PATCH v2 5/7] ARM: add SMP support for non-secure switch
Christoffer Dall
- [U-Boot] [PATCH v2 5/7] ARM: add SMP support for non-secure switch
Masahiro Yamada
- [U-Boot] [PATCH v2 5/7] ARM: add SMP support for non-secure switch
Andre Przywara
- [U-Boot] [PATCH v2 5/8] sf: winbond: Update the names for W25Q 0x40XX ID's flash parts
Jagan Teki
- [U-Boot] [PATCH v2 5/8] sf: winbond: Update the names for W25Q 0x40XX ID's flash parts
Jagan Teki
- [U-Boot] [PATCH v2 5/8] sf: winbond: Update the names for W25Q 0x40XX ID's flash parts
Syed Hussain
- [U-Boot] [PATCH v2 5/8] sf: winbond: Update the names for W25Q 0x40XX ID's flash parts
MCHEN4 at winbond.com
- [U-Boot] [PATCH v2 5/8] sf: winbond: Update the names for W25Q 0x40XX ID's flash parts
Jagan Teki
- [U-Boot] [PATCH v2 5/8] sf: winbond: Update the names for W25Q 0x40XX ID's flash parts
MCHEN4 at winbond.com
- [U-Boot] [PATCH v2 5/8] sf: winbond: Update the names for W25Q 0x40XX ID's flash parts
Michal Simek
- [U-Boot] [PATCH v2 5/8] sf: winbond: Update the names for W25Q 0x40XX ID's flash parts
Jagan Teki
- [U-Boot] [PATCH V2 5/9] dt: don't use ARCH_CPU_DTS
Stephen Warren
- [U-Boot] [PATCH v2 6/7] ac14xx: use the official product name everywhere
Gerhard Sittig
- [U-Boot] [PATCH v2 6/7] ac14xx: use the official product name everywhere
Wolfgang Denk
- [U-Boot] [PATCH v2 6/7] ARM: extend non-secure switch to also go into HYP mode
Nikolay Nikolaev
- [U-Boot] [PATCH v2 6/7] ARM: extend non-secure switch to also go into HYP mode
Masahiro Yamada
- [U-Boot] [PATCH v2 6/7] ARM: extend non-secure switch to also go into HYP mode
Andre Przywara
- [U-Boot] [PATCH v2 6/7] ARM: extend non-secure switch to also go into HYP mode
Christoffer Dall
- [U-Boot] [PATCH v2 6/7] ARM: extend non-secure switch to also go into HYP mode
Andre Przywara
- [U-Boot] [PATCH V2 6/9] dts/Makefile: don't define ARCH_CPU_DTS, BOARD_DTS
Stephen Warren
- [U-Boot] [PATCH v2 7/7] ac14xx: rephrase network boot config for development
Wolfgang Denk
- [U-Boot] [PATCH v2 7/7] ac14xx: rephrase network boot config for development
Gerhard Sittig
- [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.
Mark Jackson
- [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.
Tom Rini
- [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.
Mark Jackson
- [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.
Tom Rini
- [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.
Mark Jackson
- [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.
Mark Jackson
- [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.
Tom Rini
- [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.
Stefan Roese
- [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.
Mark Jackson
- [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.
Kipisz, Steven
- [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.
Mark Jackson
- [U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.
Mark Jackson
- [U-Boot] [PATCH v2 7/7] ARM: VExpress: enable ARMv7 virt support for VExpress A15
Andre Przywara
- [U-Boot] [PATCH V2 7/9] config: don't define CONFIG_ARCH_DEVICE_TREE
Stephen Warren
- [U-Boot] [PATCH V2 8/9] dts/Makefile: don't use cpp -P
Stephen Warren
- [U-Boot] [PATCH V2 9/9] dts/Makefile: pass -undef -D__DTS__ to cpp
Stephen Warren
- [U-Boot] [PATCH V2 REPOST 1/2] lcd: add functions to set up simplefb device tree
Stephen Warren
- [U-Boot] [PATCH V2 REPOST 1/2] lcd: add functions to set up simplefb device tree
Anatolij Gustschin
- [U-Boot] [PATCH V2 REPOST 1/2] lcd: add functions to set up simplefb device tree
Anatolij Gustschin
- [U-Boot] [PATCH V2 REPOST 2/2] ARM: bcm2835: add simplefb DT node during bootz/m
Anatolij Gustschin
- [U-Boot] [PATCH v2] Add command line arguments to Plan 9
Steven Stallion
- [U-Boot] [PATCH v2] Add support for Wandboard quad.
Stefano Babic
- [U-Boot] [PATCH v2] Add support for Wandboard quad.
Wolfgang Denk
- [U-Boot] [PATCH v2] Add support for Wandboard quad.
Otavio Salvador
- [U-Boot] [PATCH v2] Add support for Wandboard quad.
Wolfgang Denk
- [U-Boot] [PATCH v2] Add support for Wandboard quad.
Otavio Salvador
- [U-Boot] [PATCH v2] arm, am33xx: add defines for gmii_sel_register bits
Heiko Schocher
- [U-Boot] [PATCH v2] arm, am33xx: move rtc32k_enable() to common place
Heiko Schocher
- [U-Boot] [PATCH v2] arm: dra7xx: Update the EXTRA_ENV_SETTINGS
Dan Murphy
- [U-Boot] [PATCH v2] arm: dra7xx: Update the EXTRA_ENV_SETTINGS
Tom Rini
- [U-Boot] [PATCH v2] arm: dra7xx: Update the EXTRA_ENV_SETTINGS
Dan Murphy
- [U-Boot] [PATCH v2] arm: dra7xx: Update the EXTRA_ENV_SETTINGS
Tom Rini
- [U-Boot] [PATCH v2] ARM: highbank: compile misc_init_r only if CONFIG_MISC_INIT_R
Albert ARIBAUD
- [U-Boot] [PATCH V2] ARM: mxs: Consolidate configuration options
Marek Vasut
- [U-Boot] [PATCH V2] ARM: mxs: Consolidate configuration options
Stefano Babic
- [U-Boot] [PATCH V2] ARM: mxs: Consolidate configuration options
Marek Vasut
- [U-Boot] [PATCH v2] arm: omap4: panda: Add reading of the board revision
Dan Murphy
- [U-Boot] [PATCH v2] board/p1010rdb: add pin mux and sdhc support in any boot
Shengzhou Liu
- [U-Boot] [PATCH v2] cmd_bootm.c: Correct BOOTM_ERR_OVERLAP handling
Simon Glass
- [U-Boot] [PATCH v2] cmd_bootm.c: Correct BOOTM_ERR_OVERLAP handling
Simon Glass
- [U-Boot] [PATCH v2] cmd_bootm.c: Correct BOOTM_ERR_OVERLAP handling
Tom Rini
- [U-Boot] [PATCH v2] cmd_bootm.c: Correct BOOTM_ERR_OVERLAP handling
Tom Rini
- [U-Boot] [PATCH v2] dfu, nand: before write a buffer to nand, erase the nand sectors
Heiko Schocher
- [U-Boot] [PATCH v2] dfu, nand: before write a buffer to nand, erase the nand sectors
Scott Wood
- [U-Boot] [PATCH v2] dfu, nand: before write a buffer to nand, erase the nand sectors
Heiko Schocher
- [U-Boot] [PATCH v2] dfu, nand: before write a buffer to nand, erase the nand sectors
Scott Wood
- [U-Boot] [PATCH v2] dfu: make data buffer size configurable
Heiko Schocher
- [U-Boot] [PATCH v2] dfu: make data buffer size configurable
Tom Rini
- [U-Boot] [PATCH v2] dfu: make data buffer size configurable
Marek Vasut
- [U-Boot] [PATCH V2] drivers:power:max77686: add function to set voltage and mode
Minkyu Kang
- [U-Boot] [PATCH V2] drivers:power:max77686: add function to set voltage and mode
Piotr Wilczek
- [U-Boot] [PATCH v2] drivers:usb: use get|put_unaligned_le16
Piotr Wilczek
- [U-Boot] [PATCH v2] drivers:usb: use get|put_unaligned_le16
Marek Vasut
- [U-Boot] [PATCH v2] exynos5250: move board specific configs to board specific config file
Inderpal Singh
- [U-Boot] [PATCH v2] exynos5250: move board specific configs to board specific config file
Simon Glass
- [U-Boot] [PATCH v2] exynos5250: move board specific configs to board specific config file
Inderpal Singh
- [U-Boot] [PATCH v2] exynos5250: move board specific configs to board specific config file
Inderpal Singh
- [U-Boot] [PATCH v2] exynos5250: move board specific configs to board specific config file
Simon Glass
- [U-Boot] [PATCH v2] exynos5250: remove redundant SPI and PMIC related configs
Inderpal Singh
- [U-Boot] [PATCH v2] exynos5250: remove redundant SPI and PMIC related configs
Jagan Teki
- [U-Boot] [PATCH v2] exynos5250: remove redundant SPI and PMIC related configs
Inderpal Singh
- [U-Boot] [PATCH V2] exynos: spl: Add a custom spi copy function
Jagan Teki
- [U-Boot] [PATCH V2] exynos: spl: Add a custom spi copy function
Rajeshwari Birje
- [U-Boot] [PATCH v2] Fix ext2/ext4 filesystem accesses beyond 2TiB
Frédéric Leroy
- [U-Boot] [PATCH v2] gpio: omap_gpio: Fix valid gpio range for AM33XX
Stefan Roese
- [U-Boot] [PATCH v2] gpio: omap_gpio: Fix valid gpio range for AM33XX
Axel Lin
- [U-Boot] [PATCH v2] gpio: omap_gpio: Fix valid gpio range for AM33XX
Axel Lin
- [U-Boot] [PATCH v2] gpio: omap_gpio: Fix valid gpio range for AM33XX
Axel Lin
- [U-Boot] [PATCH v2] gpio: omap_gpio: Fix valid gpio range for AM33XX
Lubomir Popov
- [U-Boot] [PATCH v2] gpio: omap_gpio: Fix valid gpio range for AM33XX
Lubomir Popov
- [U-Boot] [PATCH v2] gpio: omap_gpio: Fix valid gpio range for AM33XX
Lubomir Popov
- [U-Boot] [PATCH v2] gpio: omap_gpio: Fix valid gpio range for AM33XX
Heiko Schocher
- [U-Boot] [PATCH v2] gpio: omap_gpio: Fix valid gpio range for AM33XX
Lubomir Popov
- [U-Boot] [PATCH V2] lcd: align bmp header when uncopmressing image
Wolfgang Denk
- [U-Boot] [PATCH V2] lcd: align bmp header when uncopmressing image
Piotr Wilczek
- [U-Boot] [PATCH v2] mmc: Update "mmc->part_num" when performing a partition switch
Fabio Estevam
- [U-Boot] [PATCH v2] mmc: Update "mmc->part_num" when performing a partition switch
Stephen Warren
- [U-Boot] [PATCH v2] mmc: Update "mmc->part_num" when performing a partition switch
Fabio Estevam
- [U-Boot] [PATCH v2] mmc: Update "mmc->part_num" when performing a partition switch
Stephen Warren
- [U-Boot] [PATCH v2] mmc: Update "mmc->part_num" when performing a partition switch
Fabio Estevam
- [U-Boot] [PATCH v2] mmc: Update "mmc->part_num" when performing a partition switch
Stephen Warren
- [U-Boot] [PATCH v2] mmc: Update "mmc->part_num" when performing a partition switch
Fabio Estevam
- [U-Boot] [PATCH v2] mmc: Update "mmc->part_num" when performing a partition switch
Fabio Estevam
- [U-Boot] [PATCH v2] mmc: Update "mmc->part_num" when performing a partition switch
Stephen Warren
- [U-Boot] [PATCH v2] mmc: Update "mmc->part_num" when performing a partition switch
Stephen Warren
- [U-Boot] [PATCH v2] mmc: Update "mmc->part_num" when performing a partition switch
Fabio Estevam
- [U-Boot] [PATCH v2] mx27: add function enable_caches
Philippe Reynes
- [U-Boot] [PATCH v2] mx27: add function enable_caches
Stefano Babic
- [U-Boot] [PATCH v2] net: Use ARRAY_SIZE at appropriate places
Axel Lin
- [U-Boot] [PATCH v2] OMAP5: Fix bug in omap5_es1_prcm struct
Lubomir Popov
- [U-Boot] [PATCH V2] p1020rdb-pd: platform support
Haijun.Zhang
- [U-Boot] [Patch v2] PHY: micrel.c: add support for KSZ9031
Fabio Estevam
- [U-Boot] [Patch v2] PHY: micrel.c: add support for KSZ9031
Joe Hershberger
- [U-Boot] [PATCH v2] powerpc/85xx: Add P1023RDB board support
Chunhe Lan
- [U-Boot] [PATCH v2] powerpc/85xx: Add P1023RDB board support
Scott Wood
- [U-Boot] [PATCH v2] powerpc/85xx: Add P1023RDB board support
Chunhe Lan
- [U-Boot] [PATCH v2] powerpc/85xx: Add P1023RDB board support
Scott Wood
- [U-Boot] [PATCH v2] powerpc/85xx: Add TWR-P10xx board support
Xie Xiaobo
- [U-Boot] [PATCH v2] powerpc/85xx: Add TWR-P10xx board support
Scott Wood
- [U-Boot] [PATCH v2] sandbox: block driver using host file/device as backing store
Simon Glass
- [U-Boot] [PATCH v2] sandbox: block driver using host file/device as backing store
Henrik Nordström
- [U-Boot] [PATCH V2] spi: exynos: Minimise access to SPI FIFO level
Jagan Teki
- [U-Boot] [PATCH V2] spi: exynos: Support word transfers
Jagan Teki
- [U-Boot] [PATCH v2] spi: mxc_spi: Update pre and post divider algorithm
Jagan Teki
- [U-Boot] [PATCH v2] spi: mxc_spi: Update pre and post divider algorithm
Jagan Teki
- [U-Boot] [PATCH v2] spi: mxc_spi: Update pre and post divider algorithm
Stefano Babic
- [U-Boot] [PATCH v2] spi: mxc_spi: Update pre and post divider algorithm
Dirk Behme
- [U-Boot] [PATCH v2] spi: mxc_spi: Update pre and post divider algorithm
Stefano Babic
- [U-Boot] [PATCH v2] spi: mxc_spi: Update pre and post divider algorithm
Stefano Babic
- [U-Boot] [PATCH v2] SPL: Makefile: Build a separate autoconf.mk for SPL
Tom Rini
- [U-Boot] [PATCH v2] vf610twr: Drop unneeded 'status' variable
Fabio Estevam
- [U-Boot] [PATCH v2] vf610twr: Drop unneeded 'status' variable
Otavio Salvador
- [U-Boot] [PATCH v2] vf610twr: Drop unneeded 'status' variable
Stefano Babic
- [U-Boot] [PATCH v2] vf610twr: Drop unneeded 'status' variable
Stefano Babic
- [U-Boot] [PATCH v3 0/10] image: Reduce code duplication and refactor
Tom Rini
- [U-Boot] [PATCH v3 0/12] Verified boot implementation based on FIT
Simon Glass
- [U-Boot] [PATCH v3 0/12] Verified boot implementation based on FIT
Tom Rini
- [U-Boot] [PATCH v3 0/16] Driver model implementation, tests, demo and GPIO
Simon Glass
- [U-Boot] [PATCH V3 0/3] Introduce Samsung's new board Trats2
Jaehoon Chung
- [U-Boot] [PATCH V3 0/3] Introduce Samsung's new board Trats2
Jaehoon Chung
- [U-Boot] [PATCH v3 0/3] Make tzpc initialization common for exynos4 and exynos5
Minkyu Kang
- [U-Boot] [PATCH v3 0/6] Optimize ARM relocation
Albert ARIBAUD
- [U-Boot] [PATCH v3 0/6] Optimize ARM relocation
Albert ARIBAUD
- [U-Boot] [PATCH v3 0/6] Optimize ARM relocation
Lubomir Popov
- [U-Boot] [PATCH v3 0/6] Optimize ARM relocation
Albert ARIBAUD
- [U-Boot] [PATCH v3 0/6] Optimize ARM relocation
Benoît Thébaudeau
- [U-Boot] [PATCH v3 0/6] Optimize ARM relocation
Albert ARIBAUD
- [U-Boot] [PATCH v3 0/6] Optimize ARM relocation
Jeroen Hofstee
- [U-Boot] [PATCH v3 0/6] Optimize ARM relocation
Jeroen Hofstee
- [U-Boot] [PATCH v3 0/6] Optimize ARM relocation
Albert ARIBAUD
- [U-Boot] [PATCH v3 0/6] Optimize ARM relocation
Albert ARIBAUD
- [U-Boot] [PATCH v3 0/6] Update gdsys ppc4xx-based boards
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 0/9] Bring in new I2C framework
Simon Glass
- [U-Boot] [PATCH v3 0/9] Bring in new I2C framework
Heiko Schocher
- [U-Boot] [PATCH v3 0/9] Bring in new I2C framework
Minkyu Kang
- [U-Boot] [PATCH v3 0/9] Bring in new I2C framework
Piotr Wilczek
- [U-Boot] [PATCH v3 0/9] Bring in new I2C framework
Piotr Wilczek
- [U-Boot] [PATCH v3 0/9] Bring in new I2C framework
Dirk Eibach
- [U-Boot] [PATCH v3 0/9] Bring in new I2C framework
Heiko Schocher
- [U-Boot] [PATCH v3 0/9] Bring in new I2C framework
Heiko Schocher
- [U-Boot] [PATCH v3 0/9] Bring in new I2C framework
Dirk Eibach
- [U-Boot] [PATCH v3 0/9] Bring in new I2C framework
Piotr Wilczek
- [U-Boot] [PATCH v3 0/9] Bring in new I2C framework
Heiko Schocher
- [U-Boot] [PATCH v3 0/9] Bring in new I2C framework
Heiko Schocher
- [U-Boot] [PATCH v3 00/17] sf: Update sf framework to support all sizes of flashes
Simon Glass
- [U-Boot] [PATCH v3 00/17] sf: Update sf framework to support all sizes of flashes
Jagan Teki
- [U-Boot] [PATCH v3 00/17] sf: Update sf framework to support all sizes of flashes
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 01/12] image: Add signing infrastructure
Simon Glass
- [U-Boot] [PATCH v3 01/16] sandbox: Make map_to_sysmem() use a constant pointer
Simon Glass
- [U-Boot] [PATCH v3 01/17] sf: Add bank address register writing support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 01/17] sf: Add bank address register writing support
Simon Glass
- [U-Boot] [PATCH v3 01/17] sf: Add bank address register writing support
Jagan Teki
- [U-Boot] [PATCH v3 01/17] sf: Add bank address register writing support
Jagan Teki
- [U-Boot] [PATCH v3 01/17] sf: Add bank address register writing support
Tom Rini
- [U-Boot] [PATCH v3 02/12] image: Support signing of images
Simon Glass
- [U-Boot] [PATCH v3 02/16] sandbox: Correct data sizes and printf() strings in fdtdec.c
Simon Glass
- [U-Boot] [PATCH v3 02/17] sf: Add bank address register reading support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 02/17] sf: Add bank address register reading support
Simon Glass
- [U-Boot] [PATCH v3 03/12] image: Add RSA support for image signing
Masahiro Yamada
- [U-Boot] [PATCH v3 03/12] image: Add RSA support for image signing
Simon Glass
- [U-Boot] [PATCH v3 03/12] image: Add RSA support for image signing
Tom Rini
- [U-Boot] [PATCH v3 03/12] image: Add RSA support for image signing
Simon Glass
- [U-Boot] [PATCH v3 03/12] image: Add RSA support for image signing
Simon Glass
- [U-Boot] [PATCH v3 03/12] image: Add RSA support for image signing
Simon Glass
- [U-Boot] [PATCH v3 03/12] image: Add RSA support for image signing
Tom Rini
- [U-Boot] [PATCH v3 03/16] sandbox: config: Don't use 64-bit physical memory
Simon Glass
- [U-Boot] [PATCH v3 03/17] sf: Add extended addr write support for winbond|stmicro
Simon Glass
- [U-Boot] [PATCH v3 03/17] sf: Add extended addr write support for winbond|stmicro
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 04/10] SPI: Add Orion SPI driver
Jagan Teki
- [U-Boot] [PATCH v3 04/10] SPI: Add Orion SPI driver
Sascha Silbe
- [U-Boot] [PATCH v3 04/10] SPI: Add Orion SPI driver
Jagan Teki
- [U-Boot] [PATCH v3 04/10] SPI: Add Orion SPI driver
Sascha Silbe
- [U-Boot] [PATCH v3 04/10] SPI: Add Orion SPI driver
Sebastian Hesselbarth
- [U-Boot] [PATCH v3 04/12] mkimage: Add -k option to specify key directory
Simon Glass
- [U-Boot] [PATCH v3 04/16] sandbox: Build a device tree file for sandbox
Simon Glass
- [U-Boot] [PATCH v3 04/17] sf: Add extended addr read support for winbond|stmicro
Simon Glass
- [U-Boot] [PATCH v3 04/17] sf: Add extended addr read support for winbond|stmicro
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 05/12] mkimage: Add -K to write public keys to an FDT blob
Simon Glass
- [U-Boot] [PATCH v3 05/16] Add cmd_process_error() to report and process errors
Simon Glass
- [U-Boot] [PATCH v3 05/17] sf: read flash bank addr register at probe time
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 05/17] sf: read flash bank addr register at probe time
Simon Glass
- [U-Boot] [Patch v3 06/11] powerpc/T4240EMU: Add T4240EMU target
York Sun
- [U-Boot] [PATCH v3 06/12] mkimage: Add -F option to modify an existing .fit file
Simon Glass
- [U-Boot] [PATCH v3 06/16] sandbox: config: Enable driver model
Simon Glass
- [U-Boot] [PATCH v3 06/17] sf: Update sf to support all sizes of flashes
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 06/17] sf: Update sf to support all sizes of flashes
Simon Glass
- [U-Boot] [PATCH v3 07/12] mkimage: Add -c option to specify a comment for key signing
Simon Glass
- [U-Boot] [PATCH v3 07/16] dm: Add base driver model support
Simon Glass
- [U-Boot] [PATCH v3 07/16] dm: Add base driver model support
Marek Vasut
- [U-Boot] [PATCH v3 07/17] sf: Update sf read to support all sizes of flashes
Simon Glass
- [U-Boot] [PATCH v3 07/17] sf: Update sf read to support all sizes of flashes
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 08/12] mkimage: Add -r option to specify keys that must be verified
Simon Glass
- [U-Boot] [PATCH v3 08/16] dm: Set up driver model after relocation
Marek Vasut
- [U-Boot] [PATCH v3 08/16] dm: Set up driver model after relocation
Simon Glass
- [U-Boot] [PATCH v3 08/17] sf: Add bank addr code in CONFIG_SPI_FLASH_BAR
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 08/17] sf: Add bank addr code in CONFIG_SPI_FLASH_BAR
Simon Glass
- [U-Boot] [PATCH v3 09/12] libfdt: Add fdt_find_regions()
Simon Glass
- [U-Boot] [PATCH v3 09/16] dm: Add basic tests
Simon Glass
- [U-Boot] [PATCH v3 09/17] sf: Initialize bank_sel to zero for read ops
Simon Glass
- [U-Boot] [PATCH v3 09/17] sf: Initialize bank_sel to zero for read ops
Jagan Teki
- [U-Boot] [PATCH v3 09/17] sf: Initialize bank_sel to zero for read ops
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 1/2] build: Use generic boot logo matching
Stefano Babic
- [U-Boot] [PATCH v3 1/2] console: usbkbd: Improve TFTP booting performance
Jim Lin
- [U-Boot] [PATCH v3 1/2] console: usbkbd: Improve TFTP booting performance
Stephen Warren
- [U-Boot] [PATCH v3 1/2] console: usbkbd: Improve TFTP booting performance
Stephen Warren
- [U-Boot] [PATCH v3 1/2] console: usbkbd: Improve TFTP booting performance
Jim Lin
- [U-Boot] [PATCH v3 1/2] console: usbkbd: Improve TFTP booting performance
Jim Lin
- [U-Boot] [PATCH v3 1/2] gpio: omap_gpio: Fix valid gpio range for AM33XX
Axel Lin
- [U-Boot] [PATCH v3 1/2] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo
Pierre Aubert
- [U-Boot] [PATCH v3 1/2] Optimized nand_read_buf for kirkwood
Phil Sutter
- [U-Boot] [PATCH v3 1/2] Optimized nand_read_buf for kirkwood
Albert ARIBAUD
- [U-Boot] [PATCH v3 1/2] vf610twr: Add default environment in line with other Freescale boards
Otavio Salvador
- [U-Boot] [PATCH v3 1/2] vf610twr: Add default environment in line with other Freescale boards
Wang Huan-B18965
- [U-Boot] [PATCH v3 1/2] vf610twr: Add default environment in line with other Freescale boards
Wang Huan-B18965
- [U-Boot] [PATCH v3 1/3] arm: spl: Fix SPL booting for OMAP3
Stefan Roese
- [U-Boot] [PATCH v3 1/3] arm: spl: Fix SPL booting for OMAP3
Albert ARIBAUD
- [U-Boot] [PATCH v3 1/3] arm: spl: Fix SPL booting for OMAP3
Stefan Roese
- [U-Boot] [PATCH v3 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Marek Vasut
- [U-Boot] [PATCH v3 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Jim Lin
- [U-Boot] [PATCH v3 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Stephen Warren
- [U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC
Stephen Warren
- [U-Boot] [PATCH V3 1/4] README: document CONFIG_ENV_IS_IN_MMC
Fleming Andy-AFLEMING
- [U-Boot] [PATCH v3 1/4] sf: Unify spi_flash write code
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 1/4] sf: Unify spi_flash write code
Jagan Teki
- [U-Boot] [PATCH v3 1/6] arm: ensure u-boot only uses relative relocations
Albert ARIBAUD
- [U-Boot] [PATCH v3 1/6] powerpc/ppc4xx: Use generic accessor functions for gdsys FPGA
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 1/6] powerpc/ppc4xx: Use generic accessor functions for gdsys FPGA
Wolfgang Denk
- [U-Boot] [PATCH v3 10/12] image: Add support for signing of FIT configurations
Simon Glass
- [U-Boot] [PATCH v3 10/16] dm: Add a 'dm' command for testing
Simon Glass
- [U-Boot] [PATCH v3 10/16] dm: Add a 'dm' command for testing
Marek Vasut
- [U-Boot] [PATCH v3 10/17] sf: Use spi_flash_addr() in write call
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 10/17] sf: Use spi_flash_addr() in write call
Simon Glass
- [U-Boot] [PATCH v3 11/12] sandbox: config: Enable FIT signatures with RSA
Simon Glass
- [U-Boot] [PATCH v3 11/16] dm: Add a demonstration/example driver
Simon Glass
- [U-Boot] [PATCH v3 11/16] dm: Add a demonstration/example driver
Marek Vasut
- [U-Boot] [PATCH v3 11/17] sf: stmicro: Add support for N25Q512
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 12/12] Add verified boot information and test
Simon Glass
- [U-Boot] [PATCH v3 12/12] Add verified boot information and test
Simon Glass
- [U-Boot] [PATCH v3 12/12] Add verified boot information and test
Tom Rini
- [U-Boot] [PATCH v3 12/12] Add verified boot information and test
Simon Glass
- [U-Boot] [PATCH v3 12/12] Add verified boot information and test
Simon Glass
- [U-Boot] [PATCH v3 12/16] dm: Add GPIO support and tests
Simon Glass
- [U-Boot] [PATCH v3 12/16] dm: Add GPIO support and tests
Marek Vasut
- [U-Boot] [PATCH v3 12/17] sf: stmicro: Add support for N25Q512A
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 13/16] sandbox: Convert GPIOs to use driver model
Simon Glass
- [U-Boot] [PATCH v3 13/17] sf: stmicro: Add support for N25Q1024
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 14/16] dm: Enable gpio command to support driver model
Simon Glass
- [U-Boot] [PATCH v3 14/17] sf: stmicro: Add support for N25Q1024A
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 15/16] dm: Add README for driver model
Simon Glass
- [U-Boot] [PATCH v3 15/16] dm: Add README for driver model
Marek Vasut
- [U-Boot] [PATCH v3 15/17] sf: spansion: Add support for S25FL512S_64K
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 16/16] dm: Move old driver model documentation into an 'old-docs' directory
Simon Glass
- [U-Boot] [PATCH v3 16/17] sf: Remove spi_flash_cmd_poll_bit()
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 16/17] sf: Remove spi_flash_cmd_poll_bit()
Simon Glass
- [U-Boot] [PATCH v3 16/17] sf: Remove spi_flash_cmd_poll_bit()
Jagan Teki
- [U-Boot] [PATCH v3 17/17] sf: Add Flag status register polling support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 17/17] sf: Add Flag status register polling support
Simon Glass
- [U-Boot] [PATCH v3 17/17] sf: Add Flag status register polling support
Simon Glass
- [U-Boot] [PATCH v3 17/17] sf: Add Flag status register polling support
Jagan Teki
- [U-Boot] [PATCH v3 17/17] sf: Add Flag status register polling support
Willis, Max
- [U-Boot] [PATCH v3 17/17] sf: Add Flag status register polling support
Simon Glass
- [U-Boot] [PATCH v3 17/17] sf: Add Flag status register polling support
Jagan Teki
- [U-Boot] [PATCH v3 17/21] arm: Implement the 'fake' go command
Simon Glass
- [U-Boot] [PATCH v3 17/21] arm: Implement the 'fake' go command
Albert ARIBAUD
- [U-Boot] [PATCH v3 17/21] arm: Implement the 'fake' go command
Simon Glass
- [U-Boot] [PATCH v3 2/2] config: Tegra: Improve TFTP booting performance
Jim Lin
- [U-Boot] [PATCH v3 2/2] env_nand.c: support falling back to redundant env when writing
Phil Sutter
- [U-Boot] [PATCH v3 2/2] gpio: omap_gpio: Fix valid GPIO range for OMAP5
Axel Lin
- [U-Boot] [PATCH v3 2/2] imx: Add support for the SabreSD shipped with i.MX6DL
Pierre Aubert
- [U-Boot] [PATCH v3 2/2] imx: Add support for the SabreSD shipped with i.MX6DL
Fabio Estevam
- [U-Boot] [PATCH v3 2/2] imx: Add support for the SabreSD shipped with i.MX6DL
Stefano Babic
- [U-Boot] [PATCH v3 2/2] vf610twr: Remove SoC name from U-Boot prompt
Otavio Salvador
- [U-Boot] [PATCH v3 2/2] wandboard: Add Boot Splash image with Wandboard logo
Stefano Babic
- [U-Boot] [PATCH v3 2/3] ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114
Jim Lin
- [U-Boot] [PATCH v3 2/3] ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114
Thierry Reding
- [U-Boot] [PATCH v3 2/3] ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114
Stephen Warren
- [U-Boot] [PATCH v3 2/4] sf: Place the sf calls in proper order
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 2/4] sf: Place the sf calls in proper order
Jagan Teki
- [U-Boot] [PATCH v3 2/6] powerpc/ppc4xx: Add gdsys mclink interface
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 2/6] remove all references to .dynsym
Albert ARIBAUD
- [U-Boot] [PATCH v3 3/3] Tegra: Config: Enable Tegra30/Tegra114 USB function
Marek Vasut
- [U-Boot] [PATCH v3 3/3] Tegra: Config: Enable Tegra30/Tegra114 USB function
Jim Lin
- [U-Boot] [PATCH v3 3/3] Tegra: Config: Enable Tegra30/Tegra114 USB function
Stephen Warren
- [U-Boot] [PATCH v3 3/4] sf: Add debug messages on spi_flash_read_common
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 3/4] sf: Add debug messages on spi_flash_read_common
Jagan Teki
- [U-Boot] [PATCH v3 3/6] arm: generalize lib/bss.c into lib/sections.c
Albert ARIBAUD
- [U-Boot] [PATCH v3 3/6] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 4/4] sf: Warn to use BAR for > 16MiB flashes
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v3 4/4] sf: Warn to use BAR for > 16MiB flashes
Jagan Teki
- [U-Boot] [PATCH v3 4/6] arm: make __image_copy_{start, end} compiler-generated
Albert ARIBAUD
- [U-Boot] [PATCH v3 4/6] powerpc/ppc4xx: Support gdsys multichannel iocon hardware
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 5/6] arm: make __rel_dyn_{start, end} compiler-generated
Albert ARIBAUD
- [U-Boot] [PATCH v3 5/6] powerpc/ppc4xx: Consider gdsys FPGA OSD size
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v3 6/6] arm: optimize relocate_code routine
Albert ARIBAUD
- [U-Boot] [PATCH v3 6/6] powerpc/ppc4xx: Remove CONFIG_SYS_FLASH_PROTECTION from gdsys boards
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH V3 REPOST 1/4] README: document CONFIG_ENV_IS_IN_MMC
Stephen Warren
- [U-Boot] [PATCH V3 REPOST 2/4] mmc: report capacity for the selected partition
Stephen Warren
- [U-Boot] [PATCH V3 REPOST 3/4] env_mmc: allow negative CONFIG_ENV_OFFSET
Stephen Warren
- [U-Boot] [PATCH V3 REPOST 4/4] ARM: tegra: make use of negative ENV_OFFSET on NVIDIA boards
Stephen Warren
- [U-Boot] [PATCH v3] Add support for Wandboard Quad
Tapani
- [U-Boot] [PATCH v3] Add support for Wandboard Quad
Stefano Babic
- [U-Boot] [PATCH v3] Add support for Wandboard Quad
Otavio Salvador
- [U-Boot] [PATCH v3] arm: dra7xx: Update the EXTRA_ENV_SETTINGS
Dan Murphy
- [U-Boot] [PATCH v3] arm: dra7xx: Update the EXTRA_ENV_SETTINGS
Tom Rini
- [U-Boot] [PATCH v3] arm: dra7xx: Update the EXTRA_ENV_SETTINGS
Dan Murphy
- [U-Boot] [PATCH v3] arm: dra7xx: Update the EXTRA_ENV_SETTINGS
Tom Rini
- [U-Boot] [PATCH v3] arm: dra7xx: Update the EXTRA_ENV_SETTINGS
Dan Murphy
- [U-Boot] [PATCH v3] arm: dra7xx: Update the EXTRA_ENV_SETTINGS
Dan Murphy
- [U-Boot] [PATCH v3] arm: dra7xx: Update the EXTRA_ENV_SETTINGS
Tom Rini
- [U-Boot] [PATCH v3] ARM: imx: Fix incorrect usage of CONFIG_SYS_MMC_ENV_PART
Fabio Estevam
- [U-Boot] [PATCH v3] ARM: imx: Fix incorrect usage of CONFIG_SYS_MMC_ENV_PART
Stefano Babic
- [U-Boot] [PATCH v3] ARM: imx: Fix incorrect usage of CONFIG_SYS_MMC_ENV_PART
Liu Hui-R64343
- [U-Boot] [PATCH V3] ARM: OMAP5: Power: Add more functionality to Palmas driver
Lubomir Popov
- [U-Boot] [PATCH V3] ARM: OMAP5: Power: Add more functionality to Palmas driver
Tom Rini
- [U-Boot] [PATCH v3] cmd_bootm: Add command line arguments to Plan 9
Steven Stallion
- [U-Boot] [PATCH v3] cosmetic: arm: fix comments in arch/arm/lib/crt0.S
Albert ARIBAUD
- [U-Boot] [PATCH v3] dfu, nand: before write a buffer to nand, erase the nand sectors
Heiko Schocher
- [U-Boot] [PATCH v3] dfu, nand: before write a buffer to nand, erase the nand sectors
Scott Wood
- [U-Boot] [PATCH v3] drivers:power:max77686: add function to set voltage and mode
Piotr Wilczek
- [U-Boot] [PATCH V3] lcd: align bmp header when uncopmressing image
Wolfgang Denk
- [U-Boot] [PATCH V3] lcd: align bmp header when uncopmressing image
Piotr Wilczek
- [U-Boot] [PATCH V3] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Lokesh Vutla
- [U-Boot] [PATCH v3] powerpc/85xx: Add P1023RDB board support
Chunhe Lan
- [U-Boot] [PATCH v3] powerpc/85xx: Add P1023RDB board support
Scott Wood
- [U-Boot] [PATCH v3] spi/arm-pl022: Add support for ARM PL022 spi controller
Jagan Teki
- [U-Boot] [PATCH v3] usb: omap: ulpi: fix ulpi transceiver access
Michael Trimarchi
- [U-Boot] [PATCH v3] usb: omap: ulpi: fix ulpi transceiver access
Marek Vasut
- [U-Boot] [PATCH v3] usb: omap: ulpi: fix ulpi transceiver access
Michael Trimarchi
- [U-Boot] [PATCH v3] usb: omap: ulpi: fix ulpi transceiver access
Marek Vasut
- [U-Boot] [PATCH v3] usb: omap: ulpi: fix ulpi transceiver access
Michael Trimarchi
- [U-Boot] [PATCH v3] usb: omap: ulpi: fix ulpi transceiver access
Marek Vasut
- [U-Boot] [PATCH v3] usb: omap: ulpi: fix ulpi transceiver access
Igor Grinberg
- [U-Boot] [PATCH v3] usb: omap: ulpi: fix ulpi transceiver access
Michael Trimarchi
- [U-Boot] [PATCH v4 0/3] Add TI816X EVM support
TENART Antoine
- [U-Boot] [PATCH v4 0/6] sandbox: Add SPI and SPI flash emulation
Simon Glass
- [U-Boot] [PATCH v4 0/6] Update gdsys ppc4xx-based boards
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere
Simon Glass
- [U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere
Simon Glass
- [U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere
Simon Glass
- [U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere
Albert ARIBAUD
- [U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere
Albert ARIBAUD
- [U-Boot] [PATCH v4 00/14] sf: Update sf framework to support all sizes of flashes
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v4 00/14] sf: Update sf framework to support all sizes of flashes
Jagan Teki
- [U-Boot] [PATCH v4 01/14] sf: Add bank address register writing support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v4 02/14] sf: Discover the bank addr commands
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v4 02/14] sf: Discover the bank addr commands
Simon Glass
- [U-Boot] [PATCH v4 02/14] sf: Discover the bank addr commands
Jagan Teki
- [U-Boot] [PATCH v4 03/14] sf: Read flash bank addr register at probe time
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v4 04/14] sf: Update sf to support all sizes of flashes
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v4 05/10] SPI: Add Dove SPI driver
Jagan Teki
- [U-Boot] [PATCH v4 05/10] SPI: Add Dove SPI driver
Jagan Teki
- [U-Boot] [PATCH v4 05/10] SPI: Add Dove SPI driver
Sebastian Hesselbarth
- [U-Boot] [PATCH v4 05/10] SPI: Add Dove SPI driver
Jagan Teki
- [U-Boot] [PATCH v4 05/10] SPI: Add Dove SPI driver
Sebastian Hesselbarth
- [U-Boot] [PATCH v4 05/10] SPI: Add Dove SPI driver
Sascha Silbe
- [U-Boot] [PATCH v4 05/10] SPI: Add Dove SPI driver
Sebastian Hesselbarth
- [U-Boot] [PATCH v4 05/10] SPI: Add Dove SPI driver
Sascha Silbe
- [U-Boot] [PATCH v4 05/10] SPI: Add Dove SPI driver
Sascha Silbe
- [U-Boot] [PATCH v4 05/10] SPI: Add Dove SPI driver
Sebastian Hesselbarth
- [U-Boot] [PATCH v4 05/14] sf: Update sf read to support all sizes of flashes
Simon Glass
- [U-Boot] [PATCH v4 05/14] sf: Update sf read to support all sizes of flashes
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v4 06/14] sf: Add bank addr code in CONFIG_SPI_FLASH_BAR
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v4 07/14] sf: Use spi_flash_addr() in write call
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v4 08/14] sf: stmicro: Add support for N25Q512
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH V4 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1
Lokesh Vutla
- [U-Boot] [PATCH v4 09/14] sf: stmicro: Add support for N25Q512A
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v4 1/2] vf610twr: Add default environment in line with other Freescale boards
Otavio Salvador
- [U-Boot] [PATCH v4 1/2] vf610twr: Add default environment in line with other Freescale boards
Fabio Estevam
- [U-Boot] [PATCH v4 1/2] vf610twr: Add default environment in line with other Freescale boards
Otavio Salvador
- [U-Boot] [PATCH v4 1/2] vf610twr: Add default environment in line with other Freescale boards
Fabio Estevam
- [U-Boot] [PATCH v4 1/2] vf610twr: Add default environment in line with other Freescale boards
Wang Huan-B18965
- [U-Boot] [PATCH v4 1/2] vf610twr: Add default environment in line with other Freescale boards
Otavio Salvador
- [U-Boot] [PATCH v4 1/2] vf610twr: Add default environment in line with other Freescale boards
Fabio Estevam
- [U-Boot] [PATCH v4 1/2] vf610twr: Add default environment in line with other Freescale boards
Andy Voltz
- [U-Boot] [PATCH v4 1/2] vf610twr: Add default environment in line with other Freescale boards
Otavio Salvador
- [U-Boot] [PATCH v4 1/2] vf610twr: Add default environment in line with other Freescale boards
Fabio Estevam
- [U-Boot] [PATCH v4 1/2] vf610twr: Add default environment in line with other Freescale boards
Fabio Estevam
- [U-Boot] [PATCH v4 1/3] arm: spl: Fix SPL booting for OMAP3
Stefan Roese
- [U-Boot] [PATCH v4 1/3] arm: spl: Fix SPL booting for OMAP3
Albert ARIBAUD
- [U-Boot] [PATCH v4 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Stephen Warren
- [U-Boot] [PATCH v4 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Jim Lin
- [U-Boot] [PATCH v4 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Thierry Reding
- [U-Boot] [PATCH v4 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Stephen Warren
- [U-Boot] [PATCH v4 1/3] Prepare for TI816X : reuse existing code from TI814X
TENART Antoine
- [U-Boot] [PATCH v4 1/3] Prepare for TI816X : reuse existing code from TI814X
Tom Rini
- [U-Boot] [PATCH v4 1/6] powerpc/ppc4xx: Use generic accessor functions for gdsys FPGA
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 1/6] sandbox: Increase memory size to 32MB
Simon Glass
- [U-Boot] [PATCH v4 1/7] arm: add MMU/D-Cache support for Faraday cores
Kuo-Jung Su
- [U-Boot] [PATCH v4 1/7] arm: add MMU/D-Cache support for Faraday cores
Kuo-Jung Su
- [U-Boot] [PATCH v4 1/7] arm: add MMU/D-Cache support for Faraday cores
Albert ARIBAUD
- [U-Boot] [PATCH v4 1/7] arm: add MMU/D-Cache support for Faraday cores
Albert ARIBAUD
- [U-Boot] [PATCH v4 1/7] arm: vf610: Add IOMUX support for Vybrid VF610
Stefano Babic
- [U-Boot] [PATCH v4 1/8] Implement autoconf header file
Simon Glass
- [U-Boot] [PATCH v4 1/9] at91: Correct CONFIG_AUTOBOOT_PROMPT definition for pm9263
Tom Rini
- [U-Boot] [PATCH v4 10/14] sf: stmicro: Add support for N25Q1024
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v4 11/14] sf: stmicro: Add support for N25Q1024A
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v4 12/14] sf: spansion: Add support for S25FL512S_64K
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v4 13/14] sf: Remove spi_flash_cmd_poll_bit()
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v4 14/14] sf: Add Flag status register polling support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v4 14/14] sf: Add Flag status register polling support
Simon Glass
- [U-Boot] [PATCH v4 14/14] sf: Add Flag status register polling support
Jagan Teki
- [U-Boot] [PATCH v4 2/2] vf610twr: Remove SoC name from U-Boot prompt
Otavio Salvador
- [U-Boot] [PATCH v4 2/3] Add TI816X support
TENART Antoine
- [U-Boot] [PATCH v4 2/3] Add TI816X support
Tom Rini
- [U-Boot] [PATCH v4 2/3] Add TI816X support
TENART Antoine
- [U-Boot] [PATCH v4 2/3] ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114
Jim Lin
- [U-Boot] [PATCH v4 2/3] ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114
Stephen Warren
- [U-Boot] [PATCH v4 2/3] ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114
Stephen Warren
- [U-Boot] [PATCH v4 2/3] ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114
Jim Lin
- [U-Boot] [PATCH v4 2/6] powerpc/ppc4xx: Add gdsys mclink interface
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 2/6] sandbox: spi: Adjust 'sf test' to work on sandbox
Simon Glass
- [U-Boot] [PATCH v4 2/7] arm: add Faraday common utilities
Albert ARIBAUD
- [U-Boot] [PATCH v4 2/7] arm: add Faraday common utilities
Kuo-Jung Su
- [U-Boot] [PATCH v4 2/7] arm: vf610: Add Vybrid VF610 CPU support
Stefano Babic
- [U-Boot] [PATCH v4 2/8] main: Use autoconf for boot retry feature
Simon Glass
- [U-Boot] [PATCH v4 3/3] Add TI816X evm board support
TENART Antoine
- [U-Boot] [PATCH v4 3/3] Add TI816X evm board support
Tom Rini
- [U-Boot] [PATCH v4 3/3] Add TI816X evm board support
TENART Antoine
- [U-Boot] [PATCH v4 3/3] Add TI816X evm board support
Lokesh Vutla
- [U-Boot] [PATCH v4 3/3] Tegra: Config: Enable Tegra30/Tegra114 USB function
Jim Lin
- [U-Boot] [PATCH v4 3/6] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 3/6] sandbox: Rename sb_cmdline_option to sandbox_cmdline_option
Simon Glass
- [U-Boot] [PATCH v4 3/7] net: fec_mxc: Add support for Vybrid VF610
Stefano Babic
- [U-Boot] [PATCH v4 3/8] main: Remove CONFIG #ifdefs from the abortboot() code
Simon Glass
- [U-Boot] [PATCH v4 4/6] powerpc/ppc4xx: Support gdsys multichannel iocon hardware
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 4/6] sandbox: spi: Add SPI emulation bus
Simon Glass
- [U-Boot] [PATCH v4 4/7] arm: vf610: Add watchdog support for Vybrid VF610
Stefano Babic
- [U-Boot] [PATCH v4 4/8] main: Use autoconf to remove #ifdefs around process_boot_delay()
Simon Glass
- [U-Boot] [PATCH v4 5/6] powerpc/ppc4xx: Consider gdsys FPGA OSD size
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 5/6] sandbox: spi: Add new SPI flash driver
Simon Glass
- [U-Boot] [PATCH v4 5/7] arm: vf610: Add uart support for Vybrid VF610
Stefano Babic
- [U-Boot] [PATCH v4 5/8] main: Use autoconf for boot_delay code
Simon Glass
- [U-Boot] [PATCH v4 6/6] powerpc/ppc4xx: Remove CONFIG_SYS_FLASH_PROTECTION from gdsys boards
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v4 6/6] sandbox: spi: Enable new spi/sf layers
Simon Glass
- [U-Boot] [PATCH v4 6/7] arm: add Faraday firmware image utility
Albert ARIBAUD
- [U-Boot] [PATCH v4 6/7] arm: add Faraday firmware image utility
Kuo-Jung Su
- [U-Boot] [PATCH v4 6/7] arm: vf610: Add Vybrid VF610 to mxc_ocotp document
Stefano Babic
- [U-Boot] [PATCH v4 6/8] main: Use autoconf for parser selection
Simon Glass
- [U-Boot] [PATCH v4 7/7] arm: add Faraday A36x SoC platform support
Kuo-Jung Su
- [U-Boot] [PATCH v4 7/7] arm: add Faraday A36x SoC platform support
Albert ARIBAUD
- [U-Boot] [PATCH v4 7/7] arm: vf610: Add basic support for Vybrid VF610TWR board
Stefano Babic
- [U-Boot] [PATCH v4 7/8] main: Use autoconf in command line reading
Simon Glass
- [U-Boot] [PATCH v4 8/8] main: Use autoconf in main_loop()
Simon Glass
- [U-Boot] [PATCH v4] arm: dra7xx: Update the EXTRA_ENV_SETTINGS
Dan Murphy
- [U-Boot] [PATCH v4] arm: dra7xx: Update the EXTRA_ENV_SETTINGS
Lubomir Popov
- [U-Boot] [PATCH v4] arm: dra7xx: Update the EXTRA_ENV_SETTINGS
Dan Murphy
- [U-Boot] [PATCH v4] arm: dra7xx: Update the EXTRA_ENV_SETTINGS
Tom Rini
- [U-Boot] [PATCH v4] arm: dra7xx: Update the EXTRA_ENV_SETTINGS
Dan Murphy
- [U-Boot] [PATCH V4] ARM: OMAP5: Power: Add more functionality to Palmas driver
Lubomir Popov
- [U-Boot] [PATCH V4] ARM: OMAP5: Power: Add more functionality to Palmas driver
Tom Rini
- [U-Boot] [PATCH v4] dfu, nand: before write a buffer to nand, erase the nand sectors
Heiko Schocher
- [U-Boot] [PATCH v4] dfu, nand: before write a buffer to nand, erase the nand sectors
Scott Wood
- [U-Boot] [PATCH V4] lcd: align bmp header when uncopmressing image
Piotr Wilczek
- [U-Boot] [PATCH v4] powerpc/85xx: Add P1023RDB board support
Chunhe Lan
- [U-Boot] [PATCH v4] sf: Add bank addr code in CONFIG_SPI_FLASH_BAR
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH v4] usb: omap: ulpi: fix ulpi transceiver access
Michael Trimarchi
- [U-Boot] [PATCH v4] usb: omap: ulpi: fix ulpi transceiver access
Michael Trimarchi
- [U-Boot] [PATCH v4] usb: omap: ulpi: fix ulpi transceiver access
Tom Rini
- [U-Boot] [PATCH v4] usb: omap: ulpi: fix ulpi transceiver access
Marek Vasut
- [U-Boot] [PATCH v5 0/3] Add TI816X EVM support
TENART Antoine
- [U-Boot] [PATCH v5 0/6] Update gdsys ppc4xx-based boards
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v5 0/7] Add cros-ec protocol driver and enable it in smdk5250
Tom Rini
- [U-Boot] [PATCH v5 0/7] Add cros-ec protocol driver and enable it in smdk5250
Minkyu Kang
- [U-Boot] [PATCH v5 0/7] Add cros-ec protocol driver and enable it in smdk5250
Tom Rini
- [U-Boot] [PATCH v5 0/8] Add Marvell Dove and SolidRun CuBox support
Sascha Silbe
- [U-Boot] [PATCH v5 00/14] arm: add Faraday A36x SoC platform support
Kuo-Jung Su
- [U-Boot] [PATCH v5 01/14] arm: dma_alloc_coherent: malloc() -> memalign()
Kuo-Jung Su
- [U-Boot] [PATCH v5 02/14] net: ftgmac100: add MMU/D-cache support
Kuo-Jung Su
- [U-Boot] [PATCH v5 02/14] net: ftgmac100: add MMU/D-cache support
Kuo-Jung Su
- [U-Boot] [PATCH v5 02/14] net: ftgmac100: add MMU/D-cache support
Albert ARIBAUD
- [U-Boot] [PATCH v5 03/14] net: add Faraday FTMAC110 10/100Mbps ethernet support
Kuo-Jung Su
- [U-Boot] [PATCH v5 03/14] net: add Faraday FTMAC110 10/100Mbps ethernet support
Albert ARIBAUD
- [U-Boot] [PATCH v5 03/14] net: add Faraday FTMAC110 10/100Mbps ethernet support
Tom Rini
- [U-Boot] [PATCH v5 03/14] net: add Faraday FTMAC110 10/100Mbps ethernet support
Albert ARIBAUD
- [U-Boot] [PATCH v5 03/14] net: add Faraday FTMAC110 10/100Mbps ethernet support
Tom Rini
- [U-Boot] [PATCH v5 04/14] video: add Faraday FTLCDC200 LCD controller support
Kuo-Jung Su
- [U-Boot] [PATCH v5 05/14] nand: add Faraday FTNANDC021 NAND controller support
Kuo-Jung Su
- [U-Boot] [PATCH v5 05/14] nand: add Faraday FTNANDC021 NAND controller support
Scott Wood
- [U-Boot] [PATCH v5 05/14] nand: add Faraday FTNANDC021 NAND controller support
Kuo-Jung Su
- [U-Boot] [PATCH v5 05/14] nand: add Faraday FTNANDC021 NAND controller support
Scott Wood
- [U-Boot] [PATCH v5 06/14] cfi_flash: use buffer length in unmap_physmem()
Kuo-Jung Su
- [U-Boot] [PATCH v5 07/14] arm: add MMU/D-Cache support for Faraday cores
Kuo-Jung Su
- [U-Boot] [PATCH v5 08/14] arm: add Faraday processor core support
Kuo-Jung Su
- [U-Boot] [PATCH V5 09/12] mmc: omap_hsmmc: Update pbias programming
Lokesh Vutla
- [U-Boot] [PATCH v5 09/14] arm: add Faraday FTINTC020 interrupt controller support
Kuo-Jung Su
- [U-Boot] [PATCH v5 1/2] vf610twr: Add default environment in line with other Freescale boards
Otavio Salvador
- [U-Boot] [PATCH v5 1/2] vf610twr: Add default environment in line with other Freescale boards
Andy Voltz
- [U-Boot] [PATCH v5 1/2] vf610twr: Add default environment in line with other Freescale boards
Stefano Babic
- [U-Boot] [PATCH v5 1/3] arm: spl: Fix SPL booting for OMAP3
Stefan Roese
- [U-Boot] [PATCH v5 1/3] arm: spl: Fix SPL booting for OMAP3
Albert ARIBAUD
- [U-Boot] [PATCH v5 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Stephen Warren
- [U-Boot] [PATCH v5 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Stephen Warren
- [U-Boot] [PATCH v5 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Marek Vasut
- [U-Boot] [PATCH v5 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Marek Vasut
- [U-Boot] [PATCH v5 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Jim Lin
- [U-Boot] [PATCH v5 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
Tom Warren
- [U-Boot] [PATCH v5 1/3] Prepare for TI816X : reuse existing code from TI814X
Wolfgang Denk
- [U-Boot] [PATCH v5 1/3] Prepare for TI816X : reuse existing code from TI814X
TENART Antoine
- [U-Boot] [PATCH v5 1/6] powerpc/ppc4xx: Use generic accessor functions for gdsys FPGA
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v5 1/8] ARM: dove: add support for Marvell Dove SoC
Sebastian Hesselbarth
- [U-Boot] [PATCH v5 1/8] ARM: dove: add support for Marvell Dove SoC
Wolfgang Denk
- [U-Boot] [PATCH v5 1/8] ARM: dove: add support for Marvell Dove SoC
Sascha Silbe
- [U-Boot] [PATCH v5 10/14] arm: add Faraday FTTMR010 timer support
Kuo-Jung Su
- [U-Boot] [PATCH v5 11/14] arm: add Faraday FTPWMTMR010 timer support
Kuo-Jung Su
- [U-Boot] [PATCH v5 12/14] arm: add Faraday specific boot command
Kuo-Jung Su
- [U-Boot] [PATCH v5 12/14] arm: add Faraday specific boot command
Albert ARIBAUD
- [U-Boot] [PATCH v5 12/14] arm: add Faraday specific boot command
Kuo-Jung Su
- [U-Boot] [PATCH v5 13/14] mmc: ftsdc010_mci: clk_get_rate() -> clock_get_rate()
Kuo-Jung Su
- [U-Boot] [PATCH v5 13/14] mmc: ftsdc010_mci: clk_get_rate() -> clock_get_rate()
Andy Fleming
- [U-Boot] [PATCH v5 13/14] mmc: ftsdc010_mci: clk_get_rate() -> clock_get_rate()
Kuo-Jung Su
- [U-Boot] [PATCH v5 14/14] arm: add Faraday A360/A369 SoC platform support
Kuo-Jung Su
- [U-Boot] [PATCH v5 2/2] vf610twr: Remove SoC name from U-Boot prompt
Andy Voltz
- [U-Boot] [PATCH v5 2/2] vf610twr: Remove SoC name from U-Boot prompt
Stefano Babic
- [U-Boot] [PATCH v5 2/2] vf610twr: Remove SoC name from U-Boot prompt
Otavio Salvador
- [U-Boot] [PATCH v5 2/3] Add TI816X support
TENART Antoine
- [U-Boot] [PATCH v5 2/3] ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114
Jim Lin
- [U-Boot] [PATCH v5 2/6] powerpc/ppc4xx: Add gdsys mclink interface
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v5 2/8] usb: ehci-marvell: add support for second USB controller
Wolfgang Denk
- [U-Boot] [PATCH v5 2/8] usb: ehci-marvell: add support for second USB controller
Sascha Silbe
- [U-Boot] [PATCH v5 2/8] usb: ehci-marvell: add support for second USB controller
Marek Vasut
- [U-Boot] [PATCH v5 2/8] usb: ehci-marvell: add support for second USB controller
Sascha Silbe
- [U-Boot] [PATCH v5 3/3] Add TI816X evm board support
TENART Antoine
- [U-Boot] [PATCH v5 3/3] Tegra: Config: Enable Tegra30/Tegra114 USB function
Jim Lin
- [U-Boot] [PATCH v5 3/6] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v5 3/8] GPIO: add Dove support to Kirkwood GPIO driver
Sascha Silbe
- [U-Boot] [PATCH v5 3/8] GPIO: add Dove support to Kirkwood GPIO driver
Sebastian Hesselbarth
- [U-Boot] [PATCH v5 3/8] GPIO: add Dove support to Kirkwood GPIO driver
Wolfgang Denk
- [U-Boot] [PATCH v5 4/6] powerpc/ppc4xx: Support gdsys multichannel iocon hardware
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v5 4/8] MMC: sdhci: Add support for dove sdhci
Sascha Silbe
- [U-Boot] [PATCH v5 5/6] powerpc/ppc4xx: Consider gdsys FPGA OSD size
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v5 5/8] SPI: add Dove support to Kirkwood SPI driver
Sebastian Hesselbarth
- [U-Boot] [PATCH v5 5/8] SPI: add Dove support to Kirkwood SPI driver
Wolfgang Denk
- [U-Boot] [PATCH v5 5/8] SPI: add Dove support to Kirkwood SPI driver
Sascha Silbe
- [U-Boot] [PATCH v5 6/6] powerpc/ppc4xx: Remove CONFIG_SYS_FLASH_PROTECTION from gdsys boards
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v5 6/8] block: mvsata: add dove include
Sascha Silbe
- [U-Boot] [PATCH v5 6/8] block: mvsata: add dove include
Wolfgang Denk
- [U-Boot] [PATCH v5 7/8] NET: mvgbe: avoid unused variable warning when used without phylib support
Sascha Silbe
- [U-Boot] [PATCH v5 8/8] Boards: Add support for SolidRun CuBox
Sascha Silbe
- [U-Boot] [PATCH v5 8/8] Boards: Add support for SolidRun CuBox
Sebastian Hesselbarth
- [U-Boot] [PATCH v5 8/8] Boards: Add support for SolidRun CuBox
Wolfgang Denk
- [U-Boot] [PATCH v5] arm: dra7xx: Update the EXTRA_ENV_SETTINGS
Dan Murphy
- [U-Boot] [PATCH v5] arm: dra7xx: Update the EXTRA_ENV_SETTINGS
Tom Rini
- [U-Boot] [PATCH V5] ARM: OMAP: I2C: New read, write and probe functions
Lubomir Popov
- [U-Boot] [PATCH V5] ARM: OMAP: I2C: New read, write and probe functions
Heiko Schocher
- [U-Boot] [PATCH V5] ARM: OMAP: I2C: New read, write and probe functions
Lubomir Popov
- [U-Boot] [PATCH V5] ARM: OMAP: I2C: New read, write and probe functions
Tom Rini
- [U-Boot] [PATCH V5] ARM: OMAP: I2C: New read, write and probe functions
Heiko Schocher
- [U-Boot] [PATCH V5] ARM: OMAP: I2C: New read, write and probe functions
Heiko Schocher
- [U-Boot] [PATCH V5] ARM: OMAP: I2C: New read, write and probe functions
Heiko Schocher
- [U-Boot] [PATCH V5] ARM: OMAP: I2C: New read, write and probe functions
Lubomir Popov
- [U-Boot] [PATCH V5] ARM: OMAP: I2C: New read, write and probe functions
Heiko Schocher
- [U-Boot] [PATCH V5] ARM: OMAP: I2C: New read, write and probe functions
Tom Rini
- [U-Boot] [PATCH v6 0/2] pxa: add support for palmtreo680 board
Mike Dunn
- [U-Boot] [PATCH v6 0/2] pxa: add support for palmtreo680 board
Marek Vasut
- [U-Boot] [PATCH v6 0/5] Add gdsys ControlCenter Digital board
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v6 1/2] pxa: add support for palmtreo680 board
Mike Dunn
- [U-Boot] [PATCH v6 1/5] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v6 1/5] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey
Che-liang Chiou
- [U-Boot] [PATCH v6 2/2] pxa: palmtreo680 flash programming utility
Mike Dunn
- [U-Boot] [PATCH v6 2/5] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v6 2/5] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0
Heiko Schocher
- [U-Boot] [PATCH v6 3/5] Add Atmel I2C tpm
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v6 4/5] Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM
Andy Fleming
- [U-Boot] [PATCH v6 4/5] Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM
Dirk Eibach
- [U-Boot] [PATCH v6 4/5] Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM
Dirk Eibach
- [U-Boot] [PATCH v6 4/5] Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v6 5/5] mpc85xx: Add gdsys ControlCenter Digital board
Wolfgang Denk
- [U-Boot] [PATCH v6 5/5] mpc85xx: Add gdsys ControlCenter Digital board
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v6] Add support for Congatec Conga-QEVAl board
Stefano Babic
- [U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller
Jagan Teki
- [U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller
Armando Visconti
- [U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller
Armando Visconti
- [U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller
Jagan Teki
- [U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller
Armando Visconti
- [U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller
Armando Visconti
- [U-Boot] [PATCH v7 0/5] Add gdsys ControlCenter Digital board
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v7 1/5] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v7 2/5] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v7 3/5] Add Atmel I2C tpm
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v7 4/5] Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v7 5/5] mpc85xx: Add gdsys ControlCenter Digital board
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v7] Add support for Congatec Conga-QEVAl board
SARTRE Leo
- [U-Boot] [PATCH v7] Add support for Congatec Conga-QEVAl board
Stefano Babic
- [U-Boot] [PATCH v7] Add support for Congatec Conga-QEVAl board
Stefano Babic
- [U-Boot] [PATCH v7] Add support for Congatec Conga-QEVAl board
Wolfgang Denk
- [U-Boot] [PATCH V9 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and enable EMMC boot
Minkyu Kang
- [U-Boot] [PATCH V9 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and enable EMMC boot
Jaehoon Chung
- [U-Boot] [PATCH, v1] arm:trats: change auto-booting to boot kernel with separate device tree blob
Minkyu Kang
- [U-Boot] [PATCH1/1] socfpga: Separating the configuration file for Virtual Target and real hardware Cyclone V development kit
Chin Liang See
- [U-Boot] [PATCH1/1] socfpga: Separating the configuration file for Virtual Target and real hardware Cyclone V development kit
Pavel Machek
- [U-Boot] [PATCH1/1] socfpga: Separating the configuration file for Virtual Target and real hardware Cyclone V development kit
Chin Liang See
- [U-Boot] [PATCH1/1] socfpga: Separating the configuration file for Virtual Target and real hardware Cyclone V development kit
Stefan Roese
- [PATCH] Add flag status during SPI Flash write
Insop Song
- [PATCH] Add SPI Flash STMicro's N25Q512A & add flag status check during SPI Flash write
Insop Song
- [U-Boot] [PATCH] Add SPI Flash STMicro's N25Q512A & add flag status check during SPI Flash write
Insop Song
- [U-Boot] [PATCH] Add SPI Flash STMicro's N25Q512A & add flag status check during SPI Flash write
Jagan Teki
- [U-Boot] [PATCH] Add SPI Flash STMicro's N25Q512A & add flag status check during SPI Flash write
Insop Song
- [U-Boot] [PATCH] Add SPI Flash STMicro's N25Q512A & add flag status check during SPI Flash write
Jagan Teki
- [U-Boot] [PATCH] Add SPI Flash STMicro's N25Q512A & add flag status check during SPI Flash write
Insop Song
- [U-Boot] [PATCH] Add SPI Flash STMicro's N25Q512A & add flag status check during SPI Flash write
Jagan Teki
- [U-Boot] [PATCH] Add SPI Flash STMicro's N25Q512A & add flag status check during SPI Flash write
Insop Song
- [U-Boot] [PATCH] Add SPI Flash STMicro's N25Q512A & add flag status check during SPI Flash write
Jagan Teki
- [U-Boot] [PATCH] Add SPI Flash STMicro's N25Q512A & add flag status check during SPI Flash write
Insop Song
- [U-Boot] [PATCH] Add SPI Flash STMicro's N25Q512A & add flag status check during SPI Flash write
Jagan Teki
- [U-Boot] [PATCH] Add splash screen support via loading from flash
Stefano Babic
- [U-Boot] [PATCH] Add splash screen support via loading from flash
Robert Winkler
- [U-Boot] [PATCH] Add splash screen support via loading from flash
Stefano Babic
- [U-Boot] [PATCH] Add splash screen support via loading from flash
Eric Nelson
- [U-Boot] [PATCH] Add splash screen support via loading from flash
Stefano Babic
- [U-Boot] [PATCH] Add splash screen support via loading from flash
Eric Nelson
- [U-Boot] [PATCH] Add splash screen support via loading from flash
Robert Winkler
- [U-Boot] [PATCH] Add splash screen support via loading from flash
Stefano Babic
- [U-Boot] [PATCH] Add splash screen support via loading from flash
Stefano Babic
- [U-Boot] [PATCH] am33xx/omap4+: Move SRAM_SCRATCH_SPACE_ADDR to <asm/arch/omap.h>
Tom Rini
- [U-Boot] [PATCH] am33xx/omap4+: Move SRAM_SCRATCH_SPACE_ADDR to <asm/arch/omap.h>
Tom Rini
- [U-Boot] [PATCH] am33xx: fix the ddr_cmdtctrl structure
Ilya Ledvich
- [U-Boot] [PATCH] am33xx: fix the ddr_cmdtctrl structure
Peter Korsgaard
- [U-Boot] [PATCH] arm, am33xx: move s_init to a common place
Heiko Schocher
- [U-Boot] [PATCH] arm, am33xx: move s_init to a common place
Tom Rini
- [U-Boot] [PATCH] arm, am33xx: move s_init to a common place
Heiko Schocher
- [U-Boot] [PATCH] arm, am33xx: move s_init to a common place
Tom Rini
- [U-Boot] [PATCH] arm, am33xx: move s_init to a common place
Peter Korsgaard
- [U-Boot] [PATCH] arm, am33xx: move s_init to a common place
Heiko Schocher
- [U-Boot] [PATCH] arm, am33xx: move s_init to a common place
Lokesh Vutla
- [U-Boot] [PATCH] arm, am33xx: move s_init to a common place
Heiko Schocher
- [U-Boot] [PATCH] arm, am33xx: move s_init to a common place
Lokesh Vutla
- [U-Boot] [PATCH] arm/km: make local functions static
Albert ARIBAUD
- [U-Boot] [PATCH] arm: atmel: add gmac support for sama5d3xek board
Bo Shen
- [U-Boot] [PATCH] arm: atmel: add nand trimffs subcommand for at91sam9n12 and at91sam9x5
Bo Shen
- [U-Boot] [PATCH] ARM: DRA7: Add Maintainer
Lokesh Vutla
- [U-Boot] [PATCH] arm: dra7xx: Update the EXTRA_ENV_SETTINGS
Dan Murphy
- [U-Boot] [PATCH] arm: fix memory coherency problem after relocation
Marek Vasut
- [U-Boot] [PATCH] arm: fix memory coherency problem after relocation
Mike Dunn
- [U-Boot] [PATCH] arm: fix memory coherency problem after relocation
Marek Vasut
- [U-Boot] [PATCH] arm: fix memory coherency problem after relocation
Mike Dunn
- [U-Boot] [PATCH] ARM: mxs: Consolidate configuration options
Marek Vasut
- [U-Boot] [PATCH] ARM: mxs: Consolidate configuration options
Wolfgang Denk
- [U-Boot] [PATCH] ARM: mxs: Consolidate configuration options
Marek Vasut
- [U-Boot] [PATCH] ARM: mxs: Consolidate configuration options
Marek Vasut
- [U-Boot] [PATCH] arm: mxs: Fix vectoring table crafting
Stefano Babic
- [U-Boot] [PATCH] ARM: mxs: Make the console buffer smaller
Marek Vasut
- [U-Boot] [PATCH] ARM: mxs: Make the console buffer smaller
Stefano Babic
- [U-Boot] [PATCH] ARM: mxs: Make the console buffer smaller
Marek Vasut
- [U-Boot] [PATCH] ARM: mxs: Make the console buffer smaller
Stefano Babic
- [U-Boot] [PATCH] ARM: mxs: Make the console buffer smaller
Otavio Salvador
- [U-Boot] [PATCH] ARM: OMAP4+: Fix MA detection during SDRAM_AUTO_DETECTION
Lokesh Vutla
- [U-Boot] [PATCH] arm: omap4: panda: Add reading of the board revision
Dan Murphy
- [U-Boot] [PATCH] arm: omap4: panda: Add reading of the board revision
Dan Murphy
- [U-Boot] [PATCH] arm: omap4: panda: Add reading of the board revision
Tom Rini
- [U-Boot] [PATCH] arm: omap4: panda: Fix checkpatch on panda file
Dan Murphy
- [U-Boot] [PATCH] arm: omap5_uevm: Correct the console sys prompt for 5432
Dan Murphy
- [U-Boot] [PATCH] arm: omap5_uevm: Correct the console sys prompt for 5432
Tom Rini
- [U-Boot] [PATCH] arm: omap5_uevm: Correct the console sys prompt for 5432
Albert ARIBAUD
- [U-Boot] [PATCH] arm: omap5_uevm: Correct the console sys prompt for 5432
Tom Rini
- [U-Boot] [PATCH] arm: omap5_uevm: Correct the console sys prompt for 5432
Albert ARIBAUD
- [U-Boot] [PATCH] arm: omap: Add check for fdtfile in the findfdt macro
Dan Murphy
- [U-Boot] [PATCH] arm: omap: Add check for fdtfile in the findfdt macro
Tom Rini
- [U-Boot] [PATCH] ARM: OMAP: GPIO: Fix valid range and enable usage of all GPIOs on OMAP5
Axel Lin
- [U-Boot] [PATCH] ARM: OMAP: GPIO: Fix valid range and enable usage of all GPIOs on OMAP5
Lubomir Popov
- [U-Boot] [PATCH] ARM: OMAP: GPIO: Fix valid range and enable usage of all GPIOs on OMAP5
Heiko Schocher
- [U-Boot] [PATCH] arm: Remove OMAP2420H4 and all omap24xx support
Tom Rini
- [U-Boot] [PATCH] ARM: tegra: only enable SCU on Tegra20
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: only enable SCU on Tegra20
Tom Warren
- [U-Boot] [PATCH] arm:trats: Increase malloc pool size (for DFU ext4 transfers)
Lukasz Majewski
- [U-Boot] [PATCH] blackfin: Fix using gd->baudrate before setting its value
Marek Vasut
- [U-Boot] [PATCH] blackfin: Fix using gd->baudrate before setting its value
Axel Lin
- [U-Boot] [PATCH] blackfin: Fix using gd->baudrate before setting its value
Axel Lin
- [U-Boot] [PATCH] blackfin: gpio: Use proper mask for comparing function
Axel Lin
- [U-Boot] [PATCH] bmp: Respect "splashpos" if it is defined
Otavio Salvador
- [U-Boot] [PATCH] bmp: Respect "splashpos" if it is defined
Otavio Salvador
- [U-Boot] [PATCH] bmp: Respect "splashpos" if it is defined
Otavio Salvador
- [U-Boot] [PATCH] board/bsc913x: Add config flag for bootdelay
Harninder Rai
- [U-Boot] [PATCH] board/bsc913x: Add config flag for bootdelay
Albert ARIBAUD
- [U-Boot] [PATCH] board/bsc913x: Add config flag for bootdelay
Rai Harninder-B01044
- [U-Boot] [PATCH] board/bsc913x: Add config flag for bootdelay
Albert ARIBAUD
- [U-Boot] [PATCH] board/bsc913x: Add config flag for bootdelay
Scott Wood
- [U-Boot] [PATCH] board/bsc913x: Add config flag for bootdelay
Rai Harninder-B01044
- [U-Boot] [PATCH] board/bsc913x: Add config flag for bootdelay
Scott Wood
- [U-Boot] [PATCH] board/p1010rdb: add pin mux and sdhc support in any boot
Shengzhou Liu
- [U-Boot] [PATCH] bootm: Disable interrupts before loading OS
Simon Glass
- [U-Boot] [PATCH] bootm: Disable interrupts before loading OS
Stefan Roese
- [U-Boot] [PATCH] bootm: Disable interrupts before loading OS
Tom Rini
- [U-Boot] [PATCH] buildman: Allow make flags to be specified for each board
Simon Glass
- [U-Boot] [PATCH] cfi_flash: Add prototypes of overridable functions
Wolfgang Denk
- [U-Boot] [PATCH] cfi_flash: Add prototypes of overridable functions
Masahiro Yamada
- [U-Boot] [PATCH] cfi_flash: Add prototypes of overridable functions
Masahiro Yamada
- [U-Boot] [PATCH] cfi_flash: Fix detection of 8-bit bus flash devices via address shift
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH] cfi_flash: Fix detection of 8-bit bus flash devices via address shift
Wolfgang Denk
- [U-Boot] [PATCH] cfi_flash: Fix detection of 8-bit bus flash devices via address shift
Stefan Roese
- [U-Boot] [PATCH] cfi_flash: Fix detection of 8-bit bus flash devices via address shift
Stefan Roese
- [U-Boot] [PATCH] checkpatch.pl: Add 'printf' to logFunctions
Tom Rini
- [U-Boot] [PATCH] checkpatch.pl: Add 'printf' to logFunctions
Tom Rini
- [U-Boot] [PATCH] checkpatch.pl: Do not hardcode perl path
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH] checkpatch.pl: Do not hardcode perl path
Sumit Gemini
- [U-Boot] [PATCH] checkpatch.pl: Do not hardcode perl path
Michael Trimarchi
- [U-Boot] [PATCH] checkpatch.pl: Do not hardcode perl path
Tom Rini
- [U-Boot] [PATCH] checkpatch.pl: Do not hardcode perl path
Joel A Fernandes
- [U-Boot] [PATCH] checkpatch.pl: Do not hardcode perl path
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH] checkpatch.pl: Do not hardcode perl path
Andreas Bießmann
- [U-Boot] [PATCH] checkpatch.pl: Do not hardcode perl path
Joel A Fernandes
- [U-Boot] [PATCH] cm_t35: Fix cm_t35 for weak splash_screen_prepare
Igor Grinberg
- [U-Boot] [PATCH] cm_t35: Fix cm_t35 for weak splash_screen_prepare
Robert Winkler
- [U-Boot] [PATCH] cmd_bootm.c: Correct BOOTM_ERR_OVERLAP handling
Tom Rini
- [U-Boot] [PATCH] cmd_bootm: Add command line arguments to Plan 9
Steven Stallion
- [U-Boot] [PATCH] cmd_bootm: Add command line arguments to Plan 9
Steven Stallion
- [U-Boot] [PATCH] cmd_bootm: Add command line arguments to Plan 9
Wolfgang Denk
- [U-Boot] [PATCH] cmd_bootm: Add command line arguments to Plan 9
Wolfgang Denk
- [U-Boot] [PATCH] cmd_bootm: Add command line arguments to Plan 9
Steven Stallion
- [U-Boot] [PATCH] cmd_bootm: Add command line arguments to Plan 9
Wolfgang Denk
- [U-Boot] [PATCH] cmd_bootm: Add command line arguments to Plan 9
Steven Stallion
- [U-Boot] [PATCH] cmd_bootm: Add command line arguments to Plan 9
Steven Stallion
- [U-Boot] [PATCH] cmd_bootm: Add command line arguments to Plan 9
Wolfgang Denk
- [U-Boot] [PATCH] cmd_bootm: Add command line arguments to Plan 9
Wolfgang Denk
- [U-Boot] [PATCH] cmd_bootm: Add command line arguments to Plan 9
Steven Stallion
- [U-Boot] [PATCH] cmd_i2c: Use ARRAY_SIZE instead of reinventing it
Simon Glass
- [U-Boot] [PATCH] cmd_i2c: Use ARRAY_SIZE instead of reinventing it
Axel Lin
- [U-Boot] [PATCH] cmd_i2c: Use ARRAY_SIZE instead of reinventing it
Axel Lin
- [U-Boot] [PATCH] ColdFire: Update the arch_global_date changes for mcf5441x
Jason Jin
- [U-Boot] [PATCH] common: env_mmc: Make mmc->part_num in sync after a partition switch
Fabio Estevam
- [U-Boot] [PATCH] common: env_mmc: Make mmc->part_num in sync after a partition switch
Stephen Warren
- [U-Boot] [PATCH] common: remove unaligned access error in bootmenu_getoption()
Lan Yixun (dlan)
- [U-Boot] [PATCH] da850evm: Use clrbits function with correct endianess
Christian Riesch
- [U-Boot] [PATCH] dfu, nand: before write a buffer to nand, erase the nand sectors
Heiko Schocher
- [U-Boot] [PATCH] dfu, nand: before write a buffer to nand, erase the nand sectors
Scott Wood
- [U-Boot] [PATCH] dfu:ext4:fix Fix ext4{read|write} command formatting
Lukasz Majewski
- [U-Boot] [PATCH] dfu:ext4:fix Fix ext4{read|write} command formatting
Lukasz Majewski
- [U-Boot] [PATCH] dfu:ext4:fix Fix ext4{read|write} command formatting
Tom Rini
- [U-Boot] [PATCH] dfu:ext4:fix Fix ext4{read|write} command formatting
Lukasz Majewski
- [U-Boot] [PATCH] dfu:function: Fix number of allocated DFU function pointers
Marek Vasut
- [U-Boot] [PATCH] dfu:function: Fix number of allocated DFU function pointers
Lukasz Majewski
- [U-Boot] [PATCH] dfu:function: Fix number of allocated DFU function pointers
Heiko Schocher
- [U-Boot] [PATCH] drivers:usb: use get|put_unaligned_le16
Piotr Wilczek
- [U-Boot] [PATCH] drivers:usb: use get|put_unaligned_le16
Marek Vasut
- [U-Boot] [PATCH] dwc_ahsata: Allow use with dcache enabled
Eric Nelson
- [U-Boot] [PATCH] dwc_ahsata: Allow use with dcache enabled
Stefano Babic
- [U-Boot] [PATCH] Enable xmodem support
Angus Ainslie
- [U-Boot] [PATCH] EXYNOS: Add API for power reset and shutdown
Minkyu Kang
- [U-Boot] [PATCH] exynos: Adjust the starting MIF voltage to 1.05v
Minkyu Kang
- [U-Boot] [PATCH] exynos: Enable mmc for snow
Minkyu Kang
- [U-Boot] [PATCH] exynos: i2c: Use generic api to get i2c clk freq
Minkyu Kang
- [U-Boot] [PATCH] exynos: i2c: Use generic api to get i2c clk freq
Minkyu Kang
- [U-Boot] [PATCH] EXYNOS: Move includes from setup.h to tzpc_init.c
Minkyu Kang
- [U-Boot] [PATCH] exynos: uart: Use generic api to the uart clk freq
Minkyu Kang
- [U-Boot] [PATCH] fdt: allow bootdelay to be specified via device tree
Stephen Warren
- [U-Boot] [PATCH] fdt: allow bootdelay to be specified via device tree
Gerald Van Baren
- [U-Boot] [PATCH] fdt: allow bootdelay to be specified via device tree
Stephen Warren
- [U-Boot] [PATCH] fdt: allow bootdelay to be specified via device tree
Jerry Van Baren
- [U-Boot] [PATCH] fdt: Ensure that libfdt_env.h comes from U-Boot
Joe Hershberger
- [U-Boot] [PATCH] fdt: Ensure that libfdt_env.h comes from U-Boot
Tom Rini
- [U-Boot] [PATCH] fdt: remove unaligned access in fdt_fixup_ethernet()
Stephen Warren
- [U-Boot] [PATCH] Fix block device accesses beyond 2TiB
Sascha Silbe
- [U-Boot] [PATCH] Fix block device accesses beyond 2TiB
Marek Vasut
- [U-Boot] [PATCH] Fix block device accesses beyond 2TiB
Albert ARIBAUD
- [U-Boot] [PATCH] Fix block device accesses beyond 2TiB
Albert ARIBAUD
- [U-Boot] [PATCH] Fix block device accesses beyond 2TiB
Frédéric Leroy
- [U-Boot] [PATCH] Fix block device accesses beyond 2TiB
Sascha Silbe
- [U-Boot] [PATCH] Fix bootm to work on powerpc again (compressed uImage)
Stefan Roese
- [U-Boot] [PATCH] Fix bootm to work on powerpc again (compressed uImage)
Simon Glass
- [U-Boot] [PATCH] Fix bootm to work on powerpc again (compressed uImage)
Tom Rini
- [U-Boot] [PATCH] Fix bootm to work on powerpc again (compressed uImage)
Stefan Roese
- [U-Boot] [PATCH] Fix bootm to work on powerpc again (compressed uImage)
Tom Rini
- [U-Boot] [PATCH] Fix ext2/ext4 filesystem accesses beyond 2TiB
Frederic Leroy
- [U-Boot] [PATCH] Fix ext2/ext4 filesystem accesses beyond 2TiB
Sascha Silbe
- [U-Boot] [PATCH] Fix ext2/ext4 filesystem accesses beyond 2TiB
Frederic Leroy
- [U-Boot] [PATCH] Fix ext2/ext4 filesystem accesses beyond 2TiB
Sascha Silbe
- [U-Boot] [PATCH] Fix for incorrect conversion hex string to number (FMAN firmware address).
Nikolay Puzanov
- [U-Boot] [PATCH] fs/ext4: caculate log2blksz from blksz, other its value = 0
Lan Yixun (dlan)
- [U-Boot] [PATCH] fs/ext4: caculate log2blksz from blksz, other its value = 0
Albert ARIBAUD
- [U-Boot] [PATCH] fs/ext4: caculate log2blksz from blksz, other its value = 0
Dennis Lan (dlan)
- [U-Boot] [PATCH] FSL espi: Return all data read from device unmodified.
Dale P. Smith
- [U-Boot] [PATCH] FSL espi: Return all data read from device unmodified.
Jagan Teki
- [U-Boot] [PATCH] FSL espi: Return all data read from device unmodified.
Jagan Teki
- [U-Boot] [PATCH] FSL espi: Return all data read from device unmodified.
Albert ARIBAUD
- [U-Boot] [PATCH] fsl_esdhc: Do not clear interrupt status bits until data processed
Andrew Gabbasov
- [U-Boot] [PATCH] fsl_esdhc: Do not clear interrupt status bits until data processed
Dirk Behme
- [U-Boot] [Patch] fsl_esdhc: Fix DMA transfer completion waiting loop
Dirk Behme
- [U-Boot] [Patch] fsl_esdhc: Fix DMA transfer completion waiting loop
Gabbasov, Andrew
- [U-Boot] [Patch] fsl_esdhc: Fix DMA transfer completion waiting loop
Dirk Behme
- [U-Boot] [Patch] fsl_esdhc: Fix DMA transfer completion waiting loop
Gabbasov, Andrew
- [U-Boot] [PATCH] gpio: altera_pio: Fix inversed logic of gpio_is_valid() implementation
Axel Lin
- [U-Boot] [PATCH] gpio: omap_gpio: Fix valid gpio range for AM33XX
Tom Rini
- [U-Boot] [PATCH] gpio: omap_gpio: Fix valid gpio range for AM33XX
Stefan Roese
- [U-Boot] [PATCH] gpio: omap_gpio: Fix valid gpio range for AM33XX
Marek Vasut
- [U-Boot] [PATCH] gpio: omap_gpio: Fix valid gpio range for AM33XX
Axel Lin
- [U-Boot] [PATCH] gpio: omap_gpio: Remove check_gpio() function
Axel Lin
- [U-Boot] [PATCH] gpio: omap_gpio: Remove check_gpio() function
Nikita Kiryanov
- [U-Boot] [PATCH] gpio: omap_gpio: Remove check_gpio() function
Axel Lin
- [U-Boot] [PATCH] gpio: omap_gpio: Remove check_gpio() function
Nikita Kiryanov
- [U-Boot] [PATCH] gpio: pca953x: Use ARRAY_SIZE instead of reinventing it
Axel Lin
- [U-Boot] [PATCH] gpio: pca953x: Use ARRAY_SIZE instead of reinventing it
Marek Vasut
- [U-Boot] [PATCH] gpio: pca953x: Use ARRAY_SIZE instead of reinventing it
Thierry Reding
- [U-Boot] [PATCH] gpio: s3c2440_gpio: Fix wrong writel arguments
Axel Lin
- [U-Boot] [PATCH] gpio: s3c2440_gpio: Fix wrong writel arguments
Marek Vasut
- [U-Boot] [PATCH] gpio: s3c2440_gpio: Fix wrong writel arguments
Minkyu Kang
- [U-Boot] [PATCH] gpio: s5p_gpio: Call s5p_gpio_set_value() instead of open-code
Axel Lin
- [U-Boot] [PATCH] gpio: s5p_gpio: Call s5p_gpio_set_value() instead of open-code
Minkyu Kang
- [U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation
Axel Lin
- [U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation
Stefan Roese
- [U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation
Michael Trimarchi
- [U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation
Marek Vasut
- [U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation
Axel Lin
- [U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation
Marek Vasut
- [U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation
Michael Trimarchi
- [U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation
Marek Vasut
- [U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation
Michael Trimarchi
- [U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation
Marek Vasut
- [U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation
Vipin Kumar
- [U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation
Michael Trimarchi
- [U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation
Axel Lin
- [U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation
Michael Trimarchi
- [U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation
Axel Lin
- [U-Boot] [PATCH] gpio: spear_gpio: Remove unused gpio_toggle_value() function
Axel Lin
- [U-Boot] [PATCH] I2C: Exynos5: Reduce the Delay in s3c24x0 i2c driver
Minkyu Kang
- [U-Boot] [PATCH] image: Use ENOENT instead of ENOMEDIUM for better compatibility
Lubomir Popov
- [U-Boot] [PATCH] image: Use ENOENT instead of ENOMEDIUM for better compatibility
Simon Glass
- [U-Boot] [PATCH] image: Use ENOENT instead of ENOMEDIUM for better compatibility
Andreas Bießmann
- [U-Boot] [PATCH] image: Use ENOENT instead of ENOMEDIUM for better compatibility
Tom Rini
- [U-Boot] [PATCH] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo
Stefano Babic
- [U-Boot] [PATCH] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo
Pierre AUBERT
- [U-Boot] [PATCH] imx: nitrogen6x/mx6qsabrelite: Fix bug in board_video_skip
Robert Winkler
- [U-Boot] [PATCH] imx: nitrogen6x: Add splash screen support to nitrogen6x
Robert Winkler
- [U-Boot] [PATCH] input: Finish simplifing key_matrix_decode_fdt()
Tom Rini
- [U-Boot] [PATCH] input: Finish simplifing key_matrix_decode_fdt()
Tom Rini
- [U-Boot] [PATCH] input: fix unaligned access in key_matrix_decode_fdt()
Stephen Warren
- [U-Boot] [PATCH] input: simplify key_matrix_decode_fdt()
Stephen Warren
- [U-Boot] [PATCH] LaCie kirkwood boards: allow disk > 2TB
Frederic Leroy
- [U-Boot] [PATCH] LaCie kirkwood boards: allow disk > 2TB
Simon Guinot
- [U-Boot] [PATCH] LaCie kirkwood boards: allow disk > 2TB
Frédéric Leroy
- [U-Boot] [PATCH] LaCie kirkwood boards: allow disk > 2TB
Simon Guinot
- [U-Boot] [PATCH] LaCie kirkwood boards: allow disk > 2TB
Albert ARIBAUD
- [U-Boot] [PATCH] LaCie kirkwood boards: allow disk > 2TB
Albert ARIBAUD
- [U-Boot] [PATCH] LaCie kirkwood boards: allow disk > 2TB
Frédéric Leroy
- [U-Boot] [PATCH] LaCie kirkwood boards: allow disk > 2TB
Albert ARIBAUD
- [U-Boot] [PATCH] LaCie kirkwood boards: allow disk > 2TB
Frédéric Leroy
- [U-Boot] [PATCH] LaCie kirkwood boards: allow disk > 2TB
Sascha Silbe
- [U-Boot] [PATCH] lcd: align bmp header when uncopmressing image
Nikita Kiryanov
- [U-Boot] [PATCH] lcd: align bmp header when uncopmressing image
Piotr Wilczek
- [U-Boot] [PATCH] lcd: align bmp header when uncopmressing image
Piotr Wilczek
- [U-Boot] [PATCH] lcd: align bmp header when uncopmressing image
Wolfgang Denk
- [U-Boot] [PATCH] lcd: align bmp header when uncopmressing image
Wolfgang Denk
- [U-Boot] [PATCH] lcd: align bmp header when uncopmressing image
Piotr Wilczek
- [U-Boot] [PATCH] lcd: align bmp header when uncopmressing image
Wolfgang Denk
- [U-Boot] [PATCH] lcd: remove unaligned access in lcd_dt_simplefb_configure_node()
Stephen Warren
- [U-Boot] [PATCH] lib/rsa/rsa-sig.c: compile on OS X
Andreas Bießmann
- [U-Boot] [PATCH] lib/rsa/rsa-sig.c: compile on OS X
Andreas Bießmann
- [U-Boot] [PATCH] MAINTAINERS: Add an entry to the mx6q wandboard variant
Otavio Salvador
- [U-Boot] [PATCH] MAINTAINERS: Add an entry to the mx6q wandboard variant
Stefano Babic
- [U-Boot] [PATCH] MAINTAINERS: Add an entry to the mx6q wandboard variant
Fabio Estevam
- [U-Boot] [PATCH] MIPS: asm/errno.h: switch to asm-generic/errno.h
Daniel Schwierzeck
- [U-Boot] [PATCH] MIPS: mips64: fix typos in copyright text of start.S
Gabor Juhos
- [U-Boot] [PATCH] MIPS: mips64: fix typos in copyright text of start.S
Daniel Schwierzeck
- [U-Boot] [PATCH] mkimage: Build signing only if board has CONFIG_FIT_SIGNATURE
Simon Glass
- [U-Boot] [PATCH] mkimage: Build signing only if board has CONFIG_FIT_SIGNATURE
Andreas Bießmann
- [U-Boot] [PATCH] mkimage: Build signing only if board has CONFIG_FIT_SIGNATURE
Simon Glass
- [U-Boot] [PATCH] mkimage: Build signing only if board has CONFIG_FIT_SIGNATURE
Andreas Bießmann
- [U-Boot] [PATCH] mkimage: Build signing only if board has CONFIG_FIT_SIGNATURE
Simon Glass
- [U-Boot] [PATCH] mkimage: Build signing only if board has CONFIG_FIT_SIGNATURE
Lubomir Popov
- [U-Boot] [PATCH] mkimage: Build signing only if board has CONFIG_FIT_SIGNATURE
Albert ARIBAUD
- [U-Boot] [PATCH] mkimage: Build signing only if board has CONFIG_FIT_SIGNATURE
Tom Rini
- [U-Boot] [PATCH] mkimage: Build signing only if board has CONFIG_FIT_SIGNATURE
Tom Rini
- [U-Boot] [PATCH] mmc: fsl_esdhc: Fix hang after 'save' command
Zhang Haijun-B42677
- [U-Boot] [PATCH] mmc: fsl_esdhc: Fix hang after 'save' command
Andy Fleming
- [U-Boot] [PATCH] mmc: fsl_esdhc: Fix hang after 'save' command
Fabio Estevam
- [U-Boot] [PATCH] mmc: fsl_esdhc: Fix hang after 'save' command
Fabio Estevam
- [U-Boot] [PATCH] mmc: fsl_esdhc: Fix hang after 'save' command
Fabio Estevam
- [U-Boot] [PATCH] mmc: fsl_esdhc: Fix hang after 'save' command
Andy Fleming
- [U-Boot] [PATCH] mmc: mx6qsabrelite: fsl_esdhc: Define maximum bus width supported by SabreLite board
Eric Nelson
- [U-Boot] [PATCH] mmc: mx6qsabrelite: fsl_esdhc: Define maximum bus width supported by SabreLite board
Otavio Salvador
- [U-Boot] [PATCH] mpc5200: Misc updates to a3m071 config header
Stefan Roese
- [U-Boot] [PATCH] mpc83xx: add support for mpc8306
Filip Brozovic
- [U-Boot] [PATCH] mtd/nand: docg4: fix compiler warnings
Mike Dunn
- [U-Boot] [PATCH] mtd/nand: docg4: fix compiler warnings
Scott Wood
- [U-Boot] [PATCH] mtd/nand: docg4: fix compiler warnings
Marek Vasut
- [U-Boot] [PATCH] mtd/nand: docg4: fix compiler warnings
Scott Wood
- [U-Boot] [PATCH] mtd/nand: docg4: fix compiler warnings
Marek Vasut
- [U-Boot] [PATCH] mtd: nand/docg4: fix driver after Linux resync
Mike Dunn
- [U-Boot] [PATCH] mtd: nand/docg4: fix driver after Linux resync
Scott Wood
- [U-Boot] [PATCH] mtd: nand/docg4: fix driver after Linux resync
Mike Dunn
- [U-Boot] [PATCH] mtd: nand: fix initialization of BBT options
Daniel Schwierzeck
- [U-Boot] [PATCH] musb: Move linux and usb compat files to include/linux/usb
Dan Murphy
- [U-Boot] [PATCH] musb: Move linux and usb compat files to include/linux/usb
Dan Murphy
- [U-Boot] [PATCH] mx6: mx6qsabrelite/nitrogen6x: Remove incorrect setting of gpio CS signal
Stefano Babic
- [U-Boot] [PATCH] mx6slevk: Allow booting a device tree kernel
Stefano Babic
- [U-Boot] [PATCH] nand: Don't call adjust_size_for_badblocks for erase
Scott Wood
- [U-Boot] [PATCH] nand: Don't call adjust_size_for_badblocks for erase
Heiko Schocher
- [U-Boot] [PATCH] nand: Don't call adjust_size_for_badblocks for erase
Scott Wood
- [U-Boot] [PATCH] net: Use ARRAY_SIZE at appropriate places
Axel Lin
- [U-Boot] [PATCH] net: Use ARRAY_SIZE at appropriate places
Jagan Teki
- [U-Boot] [PATCH] net: Use ARRAY_SIZE at appropriate places
Marek Vasut
- [U-Boot] [PATCH] net: Use ARRAY_SIZE at appropriate places
Axel Lin
- [U-Boot] [PATCH] net: Use ARRAY_SIZE at appropriate places
Axel Lin
- [U-Boot] [PATCH] OpenRD: relocate environment to 640kB
Albert ARIBAUD
- [U-Boot] [PATCH] OpenRD: relocate environment to 640kB
Albert ARIBAUD
- [U-Boot] [PATCH] OpenRD: relocate environment to 640kB
Tom Rini
- [U-Boot] [PATCH] OpenRD: relocate environment to 640kB
Sascha Silbe
- [U-Boot] [PATCH] OpenRD: relocate environment to 640kB
Albert ARIBAUD
- [U-Boot] [PATCH] Origen: Set FIMD as the default display path
Tushar Behera
- [U-Boot] [PATCH] Origen: Set FIMD as the default display path
Tushar Behera
- [U-Boot] [PATCH] p1020rdb-pd: platform support
Haijun.Zhang
- [U-Boot] [PATCH] p1020rdb-pd: platform support
Zhang Haijun-B42677
- [U-Boot] [PATCH] p1020rdb-pd: platform support
Scott Wood
- [U-Boot] [PATCH] p1020rdb-pd: platform support
Zhang Haijun-B42677
- [U-Boot] [PATCH] p1020rdb-pd: platform support
Zhang Haijun-B42677
- [U-Boot] [PATCH] p1020rdb-pd: platform support
Scott Wood
- [U-Boot] [PATCH] power:bat:trats: Break battery charging with ctrl+C
Lukasz Majewski
- [U-Boot] [PATCH] powerpc/B4860: enable PBL tool for B4860
Shaohui Xie
- [U-Boot] [PATCH] powerpc/mpc85xx: Enabling CPC conditionally based on hwconfig options
Sandeep Singh
- [U-Boot] [PATCH] powerpc/mpc85xx: Enabling CPC conditionally based on hwconfig options
Scott Wood
- [U-Boot] [PATCH] powerpc/mpc85xx: Enabling CPC conditionally based on hwconfig options
Singh Sandeep-B37400
- [U-Boot] [PATCH] powerpc/mpc85xx: Enabling CPC conditionally based on hwconfig options
Scott Wood
- [U-Boot] [PATCH] powerpc/mpc85xx:Add iprot input arg in create_TLB0/1_entry
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc/mpc85xx:Add iprot input arg in create_TLB0/1_entry
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc/mpc85xx:Add iprot input arg in create_TLB0/1_entry
Scott Wood
- [U-Boot] [PATCH] powerpc/mpc85xx:Add iprot input arg in create_TLB0/1_entry
Scott Wood
- [U-Boot] [PATCH] powerpc/mpc85xx:Add iprot input arg in create_TLB0/1_entry
Scott Wood
- [U-Boot] [PATCH] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc/mpc85xx:Disable Debug TLB entry for non-minimal SPL
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc/mpc85xx:Disable Debug TLB entry for non-minimal SPL
Scott Wood
- [U-Boot] [PATCH] powerpc/mpc85xx:Disable Debug TLB entry for non-minimal SPL
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc/mpc85xx:Disable Debug TLB entry for non-minimal SPL
Scott Wood
- [U-Boot] [PATCH] powerpc/mpc85xx:Disable Debug TLB entry for non-minimal SPL
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc/mpc85xx:Disable Debug TLB entry for non-minimal SPL
Scott Wood
- [U-Boot] [PATCH] powerpc/p1022ds: nand: introduce the TPL based on the SPL
ying.zhang at freescale.com
- [U-Boot] [PATCH] powerpc/p1022ds: nand: introduce the TPL based on the SPL
Scott Wood
- [U-Boot] [PATCH] powerpc/p1022ds: nand: introduce the TPL based on the SPL
Zhang Ying-B40530
- [U-Boot] [PATCH] powerpc/p1022ds: nand: introduce the TPL based on the SPL
Scott Wood
- [U-Boot] [PATCH] powerpc/p1022ds: nand: introduce the TPL based on the SPL
Zhang Ying-B40530
- [U-Boot] [PATCH] powerpc/p1022ds: nand: introduce the TPL based on the SPL
Scott Wood
- [U-Boot] [PATCH] powerpc/p1022ds: nand: introduce the TPL based on the SPL
Zhang Ying-B40530
- [U-Boot] [PATCH] powerpc/p1022ds: nand: introduce the TPL based on the SPL
Scott Wood
- [U-Boot] [PATCH] powerpc/srio-pcie-boot: Avoid the NOR_BOOT macro when boot from SRIO/PCIE
Liu Gang
- [U-Boot] [PATCH] ppc: ppmc7xx: Fix possible out-of-bound access
Wolfgang Denk
- [U-Boot] [PATCH] pxa: fix compiler warnings about unused variables
Marek Vasut
- [U-Boot] [PATCH] pxa: fix compiler warnings about unused variables
Mike Dunn
- [U-Boot] [PATCH] pxa: turn icache off in cpu_init_crit()
Mike Dunn
- [U-Boot] [PATCH] README: align default commands with code
Vincent Stehlé
- [U-Boot] [PATCH] README: Document support for Plan 9
Steven Stallion
- [U-Boot] [PATCH] serial: Use ARRAY_SIZE instead of reinventing it
Axel Lin
- [U-Boot] [PATCH] sf: spansion: Correct name of S25FL128S 64K Sector part
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH] sf: spansion: Correct name of S25FL128S 64K Sector part
Jagan Teki
- [U-Boot] [PATCH] sf:stmicro: Add support for N25Q512A
Priyanka Jain
- [U-Boot] [PATCH] sf:stmicro: Add support for N25Q512A
Jagan Teki
- [U-Boot] [PATCH] sf:stmicro: Add support for N25Q512A
Jain Priyanka-B32167
- [U-Boot] [PATCH] SMDK5250: Remove reduntant code
Rajeshwari Shinde
- [U-Boot] [PATCH] SMDK5250: Remove reduntant code
Simon Glass
- [U-Boot] [PATCH] SMDK5250: Remove reduntant code
Rajeshwari Birje
- [U-Boot] [PATCH] SMDK5250: Remove reduntant code
Minkyu Kang
- [U-Boot] [PATCH] spi: armada100_spi: Remove unnecessary NULL test for dout and din
Marek Vasut
- [U-Boot] [PATCH] spi: armada100_spi: Remove unnecessary NULL test for dout and din
Axel Lin
- [U-Boot] [PATCH] spi: armada100_spi: Remove unnecessary NULL test for dout and din
Simon Glass
- [U-Boot] [PATCH] spi: armada100_spi: Remove unnecessary NULL test for dout and din
Ajay Bhargav
- [U-Boot] [PATCH] spi: armada100_spi: Remove unnecessary NULL test for dout and din
Jagan Teki
- [U-Boot] [PATCH] spi: Use DIV_ROUND_UP at appropriate places
Axel Lin
- [U-Boot] [PATCH] spi: Use DIV_ROUND_UP at appropriate places
Jagan Teki
- [U-Boot] [PATCH] spi: Use DIV_ROUND_UP at appropriate places
Axel Lin
- [U-Boot] [PATCH] spi: Use DIV_ROUND_UP at appropriate places
Jagan Teki
- [U-Boot] [PATCH] spi: Use DIV_ROUND_UP at appropriate places
Richard Retanubun
- [U-Boot] [PATCH] spi: Use DIV_ROUND_UP at appropriate places
Jagan Teki
- [U-Boot] [PATCH] spi: Use DIV_ROUND_UP at appropriate places
Stefano Babic
- [U-Boot] [PATCH] spl: exynos: make spl_boot common for all exynos based platforms
Inderpal Singh
- [U-Boot] [PATCH] spl: exynos: make spl_boot common for all exynos based platforms
Geoff Levand
- [U-Boot] [PATCH] spl: exynos: make spl_boot common for all exynos based platforms
Minkyu Kang
- [U-Boot] [PATCH] spl_mmc.c: Detect missing kernel image in RAW MMC
Peter Korsgaard
- [U-Boot] [PATCH] spl_mmc.c: Detect missing kernel image in RAW MMC
Tom Rini
- [U-Boot] [PATCH] usb, dfu gadget: switch to dfu mode in dfu_bind
Heiko Schocher
- [U-Boot] [PATCH] usb, dfu gadget: switch to dfu mode in dfu_bind
Lukasz Majewski
- [U-Boot] [PATCH] usb: add support for the USB Ethernet adapter D-Link DUB-E100 H/W Ver C1
Pierre Aubert
- [U-Boot] [PATCH] usb: add support for the USB Ethernet adapter D-Link DUB-E100 H/W Ver C1
Marek Vasut
- [U-Boot] [PATCH] usb: ehci-marvell: use structs for registers
Sascha Silbe
- [U-Boot] [PATCH] usb: ehci-marvell: use structs for registers
Marek Vasut
- [U-Boot] [PATCH] usb: fix unaligned access in device_qual()
Heiko Schocher
- [U-Boot] [PATCH] usb: fix unaligned access in device_qual()
Albert ARIBAUD
- [U-Boot] [PATCH] usb: fix unaligned access in device_qual()
Stefan Roese
- [U-Boot] [PATCH] usb: fix unaligned access in device_qual()
Marek Vasut
- [U-Boot] [PATCH] usb: fix unaligned access in device_qual()
Marek Vasut
- [U-Boot] [PATCH] usb: fix unaligned access in device_qual()
Albert ARIBAUD
- [U-Boot] [PATCH] usb: fix unaligned access in device_qual()
Albert ARIBAUD
- [U-Boot] [PATCH] usb: fix unaligned access in device_qual()
Marek Vasut
- [U-Boot] [PATCH] usb: fix unaligned access in device_qual()
Albert ARIBAUD
- [U-Boot] [PATCH] usb: omap: ulpi: fix ulpi reading/writing functions
Lubomir Popov
- [U-Boot] [PATCH] usb: omap: ulpi: fix ulpi reading/writing functions
Lubomir Popov
- [U-Boot] [PATCH] usb: omap: ulpi: fix ulpi reading/writing functions
Igor Grinberg
- [U-Boot] [PATCH] usb: omap: ulpi: fix ulpi reading/writing functions
Michael Trimarchi
- [U-Boot] [PATCH] usb: pxa27x_udc: fix compiler warnings
Mike Dunn
- [U-Boot] [PATCH] usb:composite:fix Provide function data when addressing device with only one interface
Tormod Volden
- [U-Boot] [PATCH] vf610twr: Drop unneeded 'or' operator
Fabio Estevam
- [U-Boot] [PATCH] vf610twr: Drop unneeded 'or' operator
Benoît Thébaudeau
- [U-Boot] [PATCH] vf610twr: Drop unneeded 'or' operator
Otavio Salvador
- [U-Boot] [PATCH] video: exynos: Change mipi dsi write function parameters correctly
Minkyu Kang
- [U-Boot] [PATCH] video: exynos_fb: Add the missing #else clause
Minkyu Kang
- [U-Boot] [PATCH] video: mxsfb: Break the line in videomode message
Marek Vasut
- [U-Boot] [PATCH] video: mxsfb: Break the line in videomode message
Stefano Babic
- [U-Boot] [PATCH] video: mxsfb: Break the line in videomode message
Fabio Estevam
- [U-Boot] [PATCH] video: mxsfb: Break the line in videomode message
Fabio Estevam
- [U-Boot] [PATCH] video:lcd:cfb_console: cm_t35: Add CONFIG_SPLASH_SCREEN_PREPARE support to CONFIG_VIDEO
Robert Winkler
- [U-Boot] [PATCH] video:lcd:cfb_console: cm_t35: Add CONFIG_SPLASH_SCREEN_PREPARE support to CONFIG_VIDEO
Igor Grinberg
- [U-Boot] [PATCH] video:lcd:cfb_console: cm_t35: Add CONFIG_SPLASH_SCREEN_PREPARE support to CONFIG_VIDEO
Robert Winkler
- [U-Boot] [PATCH] video:lcd:cfb_console: cm_t35: Add CONFIG_SPLASH_SCREEN_PREPARE support to CONFIG_VIDEO
Robert Winkler
- [U-Boot] [PATCH] video:lcd:cfb_console: cm_t35: Add CONFIG_SPLASH_SCREEN_PREPARE support to CONFIG_VIDEO
Igor Grinberg
- [U-Boot] [PATCH] video:lcd:cfb_console: cm_t35: Add CONFIG_SPLASH_SCREEN_PREPARE support to CONFIG_VIDEO
Robert Winkler
- [U-Boot] [PATCH] video:lcd:cfb_console: cm_t35: Add CONFIG_SPLASH_SCREEN_PREPARE support to CONFIG_VIDEO
Igor Grinberg
- [U-Boot] [PATCH] video:lcd:cfb_console: cm_t35: Add CONFIG_SPLASH_SCREEN_PREPARE support to CONFIG_VIDEO
Nikita Kiryanov
- [U-Boot] [PATCH] wandboard: Fix typo in README
Shigeru Yoshida
- [U-Boot] [PATCH] wandboard: Fix typo in README
Wolfgang Denk
- [U-Boot] [PATCH] wandboard: Fix typo in README
Otavio Salvador
- [U-Boot] [PATCH] wandboard: Fix typo in README
Shigeru Yoshida
- [U-Boot] [PATCH][v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
Prabhakar Kushwaha
- [U-Boot] [PATCHv3 0/6] Falcon boot mode for spl_mmc
Tom Rini
- [U-Boot] [PATH v5 00/14] sf: Update sf framework to support all sizes of flashes
Jagannadha Sutradharudu Teki
- [U-Boot] [PATH v5 00/14] sf: Update sf framework to support all sizes of flashes
Jagan Teki
- [U-Boot] [PATH v5 00/14] sf: Update sf framework to support all sizes of flashes
Simon Glass
- [U-Boot] [PATH v5 01/14] sf: Add bank address register writing support
Jagannadha Sutradharudu Teki
- [U-Boot] [PATH v5 02/14] sf: Discover the bank addr commands
Jagannadha Sutradharudu Teki
- [U-Boot] [PATH v5 03/14] sf: Read flash bank addr register at probe time
Jagannadha Sutradharudu Teki
- [U-Boot] [PATH v5 04/14] sf: Update sf to support all sizes of flashes
Jagannadha Sutradharudu Teki
- [U-Boot] [PATH v5 05/14] sf: Update sf read to support all sizes of flashes
Jagannadha Sutradharudu Teki
- [U-Boot] [PATH v5 06/14] sf: Add bank addr code in CONFIG_SPI_FLASH_BAR
Jagannadha Sutradharudu Teki
- [U-Boot] [PATH v5 07/14] sf: Use spi_flash_addr() in write call
Jagannadha Sutradharudu Teki
- [U-Boot] [PATH v5 08/14] sf: stmicro: Add support for N25Q512
Jagannadha Sutradharudu Teki
- [U-Boot] [PATH v5 09/14] sf: stmicro: Add support for N25Q512A
Jagannadha Sutradharudu Teki
- [U-Boot] [PATH v5 10/14] sf: stmicro: Add support for N25Q1024
Jagannadha Sutradharudu Teki
- [U-Boot] [PATH v5 11/14] sf: stmicro: Add support for N25Q1024A
Jagannadha Sutradharudu Teki
- [U-Boot] [PATH v5 12/14] sf: spansion: Add support for S25FL512S_64K
Jagannadha Sutradharudu Teki
- [U-Boot] [PATH v5 13/14] sf: Remove spi_flash_cmd_poll_bit()
Jagannadha Sutradharudu Teki
- [U-Boot] [PATH v5 14/14] sf: Add flag status register polling support
Jagannadha Sutradharudu Teki
- [U-Boot] [PPC 74xx_7xx] Please pull u-boot-74xx-7xx.git
Wolfgang Denk
- [U-Boot] [PULL] : Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PULL] : Please pull u-boot-imx
Albert ARIBAUD
- [U-Boot] [PULL] : Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PULL] : Please pull u-boot-imx
Albert ARIBAUD
- [U-Boot] [PULL] u-boot-pxa/master
Marek Vasut
- [U-Boot] [PULL] u-boot-pxa/master
Albert ARIBAUD
- [U-Boot] [PULL] u-boot-pxa/master
Marek Vasut
- [U-Boot] [PULL] u-boot-pxa/master
Albert ARIBAUD
- [U-Boot] [PULL] u-boot-pxa/master
Mike Dunn
- [U-Boot] [PULL] u-boot-pxa/master
Albert ARIBAUD
- [U-Boot] [PULL] u-boot-pxa/master
Marek Vasut
- [U-Boot] [PULL] u-boot-pxa/master
Albert ARIBAUD
- [U-Boot] [PULL] u-boot-pxa/master
Mike Dunn
- [U-Boot] [PULL] u-boot-pxa/master
Marek Vasut
- [U-Boot] [PULL] u-boot-pxa/master
Albert ARIBAUD
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [RFC PATCH] arm: lds: Remove libgcc eabi exception handling tables
Michal Simek
- [U-Boot] [RFC] [UBOOT] [PATCH 0/4] DWC back port from Linux kernel
Dan Murphy
- [U-Boot] [RFC] [UBOOT] [PATCH 0/4] DWC back port from Linux kernel
Tom Rini
- [U-Boot] [RFC] [UBOOT] [PATCH 1/4] USB: Port usb.h file from linux kernel to uBoot
Dan Murphy
- [U-Boot] [RFC] [UBOOT] [PATCH 2/4] USB: dwc3: Initial back port of dwc3 code
Dan Murphy
- [U-Boot] [RFC] [UBOOT] [PATCH 2/4] USB: dwc3: Initial back port of dwc3 code
Lukasz Majewski
- [U-Boot] [RFC] [UBOOT] [PATCH 2/4] USB: dwc3: Initial back port of dwc3 code
Dan Murphy
- [U-Boot] [RFC] [UBOOT] [PATCH 3/4] omap5: usb: Add usb otg clocks and enable
Dan Murphy
- [U-Boot] [RFC] [UBOOT] [PATCH 4/4] Makefile: Add the libdwc3 to the main Makefile
Dan Murphy
- [U-Boot] [RFC] [UBOOT] [PATCH v2 0/4] DWC back port from Linux kernel
Dan Murphy
- [U-Boot] [RFC] [UBOOT] [PATCH v2 1/4] USB: Backport kernel usb header file
Dan Murphy
- [U-Boot] [RFC] [UBOOT] [PATCH v2 2/4] USB: Adapt the usb-compat.h to uboot and fix compiler errors
Dan Murphy
- [U-Boot] [RFC] [UBOOT] [PATCH v2 2/4] USB: Adapt the usb-compat.h to uboot and fix compiler errors
Tom Rini
- [U-Boot] [RFC] [UBOOT] [PATCH v2 3/4] USB: dwc3: Initial back port of dwc3 code
Dan Murphy
- [U-Boot] [RFC] [UBOOT] [PATCH v2 3/4] USB: dwc3: Initial back port of dwc3 code
Roger Quadros
- [U-Boot] [RFC] [UBOOT] [PATCH v2 4/4] omap5: usb: Add usb otg clocks and enable
Dan Murphy
- [U-Boot] [RFC] ARM interrupt handling - was: interrupt handling
Wolfgang Denk
- [U-Boot] [RFC] interrupt handling
Albert ARIBAUD
- [U-Boot] [RFC] interrupt handling
Stefan Roese
- [U-Boot] [RFC] interrupt handling
Lukasz Majewski
- [U-Boot] [RFC] Safe Linux Updater
Alexandre Dilly
- [U-Boot] [RFC] Safe Linux Updater
Wolfgang Denk
- [U-Boot] [RFC] Safe Linux Updater
Mats Kärrman
- [U-Boot] [RFC] Safe Linux Updater
Stefano Babic
- [U-Boot] [RFC] Safe Linux Updater
Wolfgang Denk
- [U-Boot] [RFC] Safe Linux Updater
Alexandre Dilly
- [U-Boot] [SPI-TEST]: Request for test u-boot-spi/master-work
Jagan Teki
- [U-Boot] [SPI-TEST]: Request for test u-boot-spi/master-work
Willis, Max
- [U-Boot] [STATUS] ARM - pending PRs or patches for -rc1
Albert ARIBAUD
- [U-Boot] [STATUS] ARM - pending PRs or patches for -rc1
Marek Vasut
- [U-Boot] [u-boot V4] spi/arm-pl022: Add support for ARM PL022 spi controller
Jagan Teki
- [U-Boot] [u-boot V4] spi/arm-pl022: Add support for ARM PL022 spi controller
Armando Visconti
- [U-Boot] [u-boot V4] spi/arm-pl022: Add support for ARM PL022 spi controller
Jagan Teki
- [U-Boot] [u-boot V4] spi/arm-pl022: Add support for ARM PL022 spi controller
Armando Visconti
- [U-Boot] [u-boot V4] spi/arm-pl022: Add support for ARM PL022 spi controller
Jagan Teki
- [U-Boot] [u-boot V4] spi/arm-pl022: Add support for ARM PL022 spi controller
Armando Visconti
- [U-Boot] [u-boot V4] spi/arm-pl022: Add support for ARM PL022 spi controller
Armando Visconti
- [U-Boot] [u-boot V5] spi: arm-pl022: Add support for ARM PL022 spi controller
Jagan Teki
- [U-Boot] [u-boot V5] spi: arm-pl022: Add support for ARM PL022 spi controller
Armando Visconti
- [U-Boot] [u-boot V5] spi: arm-pl022: Add support for ARM PL022 spi controller
Jagan Teki
- [U-Boot] [u-boot V5] spi: arm-pl022: Add support for ARM PL022 spi controller
Armando Visconti
- [U-Boot] [U-Boot, 1/2] spi: tegra114_spi: Convert to use spi_alloc_slave()
Jagan Teki
- [U-Boot] [U-Boot, 1/3] hwmon: lm63: Use ARRAY_SIZE at appropriate place
Tom Rini
- [U-Boot] [U-Boot, U-BOOT] sf: Fix sf read for memory-mapped SPI flashes
Jagan Teki
- [U-Boot] [U-Boot, v2] fsl_ifc: add support for different IFC bank count
Andy Fleming
- [U-Boot] [U-Boot, v2] mmc: fix env in mmc with redundant compile error
Andy Fleming
- [U-Boot] [U-Boot, v2] pci: introduce CONFIG_PCI_INDIRECT_BRIDGE option
Tom Rini
- [U-Boot] [U-Boot, v3] cmd_bootm: Add command line arguments to Plan 9
Tom Rini
- [U-Boot] [U-Boot, v4] spi: add Faraday FTSPI010 SPI controller support
Jagan Teki
- [U-Boot] [U-Boot, v4] spi: add Faraday FTSPI010 SPI controller support
Kuo-Jung Su
- [U-Boot] [U-Boot, 1/1] NET: Fix system hanging if NET device is not installed
Tom Rini
- [U-Boot] [U-Boot, 1/5, v5] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Andy Fleming
- [U-Boot] [U-Boot, 1/6, v2] powerpc/doc: Update the README.srio-pcie-boot-corenet
Andy Fleming
- [U-Boot] [U-Boot, 1/6] powerpc/mpc85xx: support application without resetvec segment in the linker script
Andy Fleming
- [U-Boot] [U-Boot, 2/2, V5] spi: exynos: Support SPI_PREAMBLE mode
Jagan Teki
- [U-Boot] [U-Boot, 2/2, V5] spi: exynos: Support SPI_PREAMBLE mode
Jagan Teki
- [U-Boot] [U-Boot, 2/2] spi: tegra20_sflash: Remove redundant code to set bus and cs of struct spi_slave
Jagan Teki
- [U-Boot] [U-Boot, 2/5, v5] powerpc/mpc85xx: new SPL support for IFC NAND
Andy Fleming
- [U-Boot] [U-Boot, 2/6, v2] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module
Andy Fleming
- [U-Boot] [U-Boot, 2/8, v2] powerpc/mpc85xx: modify the functionality clear_bss and aligning the end address of the BSS
Andy Fleming
- [U-Boot] [U-Boot, 3/5, v5] board/p1010rdb:Add NAND boot support using new SPL format
Andy Fleming
- [U-Boot] [U-Boot, 3/6, v2] powerpc/b4860qds: Enable master module for boot from SRIO and PCIE
Andy Fleming
- [U-Boot] [U-Boot, 3/6] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
Andy Fleming
- [U-Boot] [U-Boot, 4/5, v5] board/bsc9131rdb:Add NAND boot support using new SPL format
Andy Fleming
- [U-Boot] [U-Boot, 4/6, v2] powerpc/b4860qds: Slave module for boot from SRIO and PCIE
Andy Fleming
- [U-Boot] [U-Boot, 4/6] Makefile: move the common makefile line to public area
Andy Fleming
- [U-Boot] [U-Boot, 5/5, v5] board/bsc9132qds:Add NAND boot support using new SPL format
Andy Fleming
- [U-Boot] [U-Boot, 5/6, v2] powerpc/t4qds: Enable master module for Boot from SRIO and PCIE
Andy Fleming
- [U-Boot] [U-Boot, 6/6, v2] powerpc/t4qds: Slave module for boot from SRIO and PCIE
Andy Fleming
- [U-Boot] [U-Boot, U-BOOT] mmc: sdhci: Enable 8-bit bus width only for 3.0 spec onwards
Andy Fleming
- [U-Boot] [U-Boot, v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
Andy Fleming
- [U-Boot] [U-Boot, v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
Scott Wood
- [U-Boot] [U-Boot, v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
Fleming Andy-AFLEMING
- [U-Boot] [U-Boot, v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
Scott Wood
- [U-Boot] [U-Boot, v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
Prabhakar Kushwaha
- [U-Boot] [U-Boot, v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
Prabhakar Kushwaha
- [U-Boot] [U-Boot, v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
Scott Wood
- [U-Boot] [U-Boot, v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
Prabhakar Kushwaha
- [U-Boot] [U-Boot, v3, 1/2] cmd_sf: Add print mesg for 'sf erase' command
Jagan Teki
- [U-Boot] [U-Boot, v3, 2/2] cmd_sf: Add print mesgs on sf read/write commands
Jagan Teki
- [U-Boot] [U-Boot, V3, REPOST, 1/4] README: document CONFIG_ENV_IS_IN_MMC
Andy Fleming
- [U-Boot] [U-Boot, V3, REPOST, 3/4] env_mmc: allow negative CONFIG_ENV_OFFSET
Andy Fleming
- [U-Boot] [U-Boot, V3, REPOST, 2/4] mmc: report capacity for the selected partition
Andy Fleming
- [U-Boot] [U-Boot, V3, REPOST, 4/4] ARM: tegra: make use of negative ENV_OFFSET on NVIDIA boards
Andy Fleming
- [U-Boot] [U-Boot,1/2,V5] spi: Add support for preamble bytes
Jagan Teki
- [U-Boot] [U-Boot,1/2,V5] spi: Add support for preamble bytes
Jagan Teki
- [U-Boot] [U-Boot,V2] MMC: DWMMC: Fix FIFO_DEPTH calculation
Andy Fleming
- [U-Boot] [U-Boot,V2] MMC: DWMMC: Fix FIFO_DEPTH calculation
Minkyu Kang
- [U-Boot] [U-Boot,v2] powerpc/85xx: Add TWR-P10xx board support
Andy Fleming
- [U-Boot] [U-Boot,v2] powerpc/pixis: Fix pixis help message
Andy Fleming
- [U-Boot] [U-Boot,v4] powerpc/85xx: Add P1023RDB board support
Andy Fleming
- [U-Boot] [U-BOOT] [PATCH] arm: da830: moved pinmux configurations to the arch tree
Vishwanathrao Badarkhe, Manish
- [U-Boot] [U-BOOT] [PATCH] arm: da830: moved pinmux configurations to the arch tree
Tom Rini
- [U-Boot] [U-BOOT] [PATCH] arm: da830: moved pinmux configurations to the arch tree
Christian Riesch
- [U-Boot] [U-BOOT] mmc: sdhci: Enable 8-bit bus width only for 3.0 spec onwards
Simon Glass
- [U-Boot] [u-boot] spi/arm-pl022: Add support for ARM PL022 spi controller
Armando Visconti
- [U-Boot] [u-boot] spi/arm-pl022: Add support for ARM PL022 spi controller
Jagan Teki
- [U-Boot] [u-boot] spi/arm-pl022: Add support for ARM PL022 spi controller
Armando Visconti
- [U-Boot] [u-boot] spi/arm-pl022: Add support for ARM PL022 spi controller
Jagan Teki
- [U-Boot] [u-boot] spi/arm-pl022: Add support for ARM PL022 spi controller
Armando Visconti
- [U-Boot] [uBoot] [PATCH v2] musb: Move linux and usb compat files to include/linux/usb
Dan Murphy
- [U-Boot] [uBoot] [PATCH v2] musb: Move linux and usb compat files to include/linux/usb
Marek Vasut
- [U-Boot] [uBoot] [PATCH v2] musb: Move linux and usb compat files to include/linux/usb
Dan Murphy
- [U-Boot] [uBoot] [PATCH v2] musb: Move linux and usb compat files to include/linux/usb
Tom Rini
- [U-Boot] [uBoot] [PATCH v2] musb: Move linux and usb compat files to include/linux/usb
Marek Vasut
- [U-Boot] [uBoot] [PATCH v2] musb: Move linux and usb compat files to include/linux/usb
Dan Murphy
- [U-Boot] AM335x: enabling datacache in SPL slows down system?
Bas van den Berg
- [U-Boot] AM335x: enabling datacache in SPL slows down system?
Jeroen Hofstee
- [U-Boot] AM335x: enabling datacache in SPL slows down system?
Wolfgang Denk
- [U-Boot] AM335x: enabling datacache in SPL slows down system?
Jeroen Hofstee
- [U-Boot] AM335x: enabling datacache in SPL slows down system?
Tom Rini
- [U-Boot] AM335x: enabling datacache in SPL slows down system?
Bas van den Berg
- [U-Boot] AM335x: enabling datacache in SPL slows down system?
Jeroen Hofstee
- [U-Boot] arm, am335x: make mpu pll config configurable
Heiko Schocher
- [U-Boot] arm, am335x: make mpu pll config configurable
Tom Rini
- [U-Boot] arm, am335x: make mpu pll config configurable
Heiko Schocher
- [U-Boot] arm, am335x: make mpu pll config configurable
Tom Rini
- [U-Boot] arm, am33xx: add defines for gmii_sel_register bits
Heiko Schocher
- [U-Boot] arm, am33xx: add defines for gmii_sel_register bits
Tom Rini
- [U-Boot] arm, am33xx: add defines for gmii_sel_register bits
Heiko Schocher
- [U-Boot] arm, am33xx: move rtc32k_enable() to common place
Heiko Schocher
- [U-Boot] arm, am33xx: move rtc32k_enable() to common place
Tom Rini
- [U-Boot] arm, am33xx: move rtc32k_enable() to common place
Heiko Schocher
- [U-Boot] arm, am33xx: move uart soft reset code to common place
Heiko Schocher
- [U-Boot] arm, am33xx: move uart soft reset code to common place
Tom Rini
- [U-Boot] arm, arm335x: add watchdog support
Heiko Schocher
- [U-Boot] arm, arm335x: add watchdog support
Tom Rini
- [U-Boot] arm, arm335x: add watchdog support
Heiko Schocher
- [U-Boot] arm, arm335x: add watchdog support
Tom Rini
- [U-Boot] arm, arm335x: add watchdog support
Michael Trimarchi
- [U-Boot] arm, arm335x: add watchdog support
Heiko Schocher
- [U-Boot] arm, arm335x: add watchdog support
Michael Trimarchi
- [U-Boot] arm, arm335x: add watchdog support
Heiko Schocher
- [U-Boot] arm, arm335x: add watchdog support
Michael Trimarchi
- [U-Boot] arm, arm335x: save_omap_boot_params question
Heiko Schocher
- [U-Boot] arm, arm335x: save_omap_boot_params question
Tom Rini
- [U-Boot] arm, arm335x: save_omap_boot_params question
Heiko Schocher
- [U-Boot] arm, arm335x: save_omap_boot_params question
Tom Rini
- [U-Boot] arm, arm335x: save_omap_boot_params question
Sricharan R
- [U-Boot] arm, arm335x: save_omap_boot_params question
Heiko Schocher
- [U-Boot] arm, arm335x: save_omap_boot_params question
Sricharan R
- [U-Boot] arm, spl: add watchdog library to SPL
Heiko Schocher
- [U-Boot] arm, spl: add watchdog library to SPL
Tom Rini
- [U-Boot] ASM code for UART initialization
André Schaller
- [U-Boot] ASM code for UART initialization
Wolfgang Denk
- [U-Boot] board/b4860qds: Relax NOR flash teadc timing parameter
Andy Fleming
- [U-Boot] board/bsc9131rdb: Add DSP side tlb and laws
Andy Fleming
- [U-Boot] board/bsc9131rdb: Add targets for Sysclk 100MHz
Andy Fleming
- [U-Boot] board/bsc9131rdb: Update default boot environment settings
Andy Fleming
- [U-Boot] board/p1010rdb: Fix PCIe TLB creation on CONFIG_PCI define
Andy Fleming
- [U-Boot] Booting ELF image of Integrity on p2041rdb using u-boot
Zvi Vered
- [U-Boot] bootm does not work if netconsole is enabled
Michael Walle
- [U-Boot] bootm does not work if netconsole is enabled
Michael Walle
- [U-Boot] Bug in fdt_fixup_fman_firmware
Andy Fleming
- [U-Boot] bug, nand, am33xx: nand->ecc.strength not set in board_nand_init()
Heiko Schocher
- [U-Boot] bug, nand, am33xx: nand->ecc.strength not set in board_nand_init()
Scott Wood
- [U-Boot] Build error of u-boot mater branch
Bo Shen
- [U-Boot] Build error of u-boot mater branch
Enric Balletbo Serra
- [U-Boot] Build error of u-boot mater branch
Bo Shen
- [U-Boot] common: board_f: Do not call board_postclk_init twice
Tom Rini
- [U-Boot] crash in usb_stor_get_info using pre-relocation address for ss->transport
Chris Packham
- [U-Boot] crash in usb_stor_get_info using pre-relocation address for ss->transport
Chris Packham
- [U-Boot] crash in usb_stor_get_info using pre-relocation address for ss->transport
Albert ARIBAUD
- [U-Boot] crash in usb_stor_get_info using pre-relocation address for ss->transport
Chris Packham
- [U-Boot] crash in usb_stor_get_info using pre-relocation address for ss->transport
Albert ARIBAUD
- [U-Boot] crash in usb_stor_get_info using pre-relocation address for ss->transport
Chris Packham
- [U-Boot] crash in usb_stor_get_info using pre-relocation address for ss->transport
Chris Packham
- [U-Boot] dfu, nand: writing on not empty nand partition
Heiko Schocher
- [U-Boot] dfu, nand: writing on not empty nand partition
Tom Rini
- [U-Boot] dfu, nand: writing on not empty nand partition
Heiko Schocher
- [U-Boot] dfu: make data buffer size configurable
Heiko Schocher
- [U-Boot] dfu: make data buffer size configurable
Pantelis Antoniou
- [U-Boot] dfu: make data buffer size configurable
Lukasz Majewski
- [U-Boot] dfu: make data buffer size configurable
Heiko Schocher
- [U-Boot] dfu: make data buffer size configurable
Pantelis Antoniou
- [U-Boot] dfu: make data buffer size configurable
Tom Rini
- [U-Boot] dfu: make data buffer size configurable
Heiko Schocher
- [U-Boot] dfu: make data buffer size configurable
Tom Rini
- [U-Boot] dfu: make data buffer size configurable
Heiko Schocher
- [U-Boot] dfu: make data buffer size configurable
Tom Rini
- [U-Boot] dfu: make data buffer size configurable
Heiko Schocher
- [U-Boot] dfu: make data buffer size configurable
Wolfgang Denk
- [U-Boot] dfu: make data buffer size configurable
Marek Vasut
- [U-Boot] dfu: make data buffer size configurable
Heiko Schocher
- [U-Boot] dfu: make data buffer size configurable
Lukasz Majewski
- [U-Boot] dfu: make data buffer size configurable
Wolfgang Denk
- [U-Boot] dfu: make data buffer size configurable
Tom Rini
- [U-Boot] dfu: make data buffer size configurable
Marek Vasut
- [U-Boot] dfu: make data buffer size configurable
Heiko Schocher
- [U-Boot] dfu: using dfu-util -l shows different output
Heiko Schocher
- [U-Boot] dfu: using dfu-util -l shows different output
Pantelis Antoniou
- [U-Boot] dfu: using dfu-util -l shows different output
Heiko Schocher
- [U-Boot] dfu: using dfu-util -l shows different output
Lukasz Majewski
- [U-Boot] dfu: using dfu-util -l shows different output
Heiko Schocher
- [U-Boot] dfu: using dfu-util -l shows different output
Lukasz Majewski
- [U-Boot] dfu: using dfu-util -l shows different output
Heiko Schocher
- [U-Boot] dfu: using dfu-util -l shows different output
Lukasz Majewski
- [U-Boot] DHCP Gateway
Saridakis, Dean (US SSA)
- [U-Boot] disk: Fix possible out-of-bounds access in part_efi.c
Tom Rini
- [U-Boot] fdt: allow bootdelay to be specified via device tree
Tom Rini
- [U-Boot] fdt: remove unaligned access in fdt_fixup_ethernet()
Tom Rini
- [U-Boot] fdt: remove unaligned access in fdt_fixup_ethernet()
Jerry Van Baren
- [U-Boot] Fix block device accesses beyond 2TiB
Tom Rini
- [U-Boot] Flash not Erased
Jan Schunke
- [U-Boot] Flash not Erased
Stefan Roese
- [U-Boot] Flash not Erased
Jan Schunke
- [U-Boot] FSL SPI read fix.
Jagan Teki
- [U-Boot] fsl_esdhc: Do not clear interrupt status bits until data processed
Andy Fleming
- [U-Boot] generic_board: reduce the redundancy of gd_t struct members
Tom Rini
- [U-Boot] gpio: Question about gpio_set_value() implementation in spear_gpio.c
Otavio Salvador
- [U-Boot] gpio: Question about gpio_set_value() implementation in spear_gpio.c
Marek Vasut
- [U-Boot] gpio: Question about gpio_set_value() implementation in spear_gpio.c
Axel Lin
- [U-Boot] gpio: Question about gpio_set_value() implementation in spear_gpio.c
Stefan Roese
- [U-Boot] gpio: Question about gpio_set_value() implementation in spear_gpio.c
Marek Vasut
- [U-Boot] gpio: Question about gpio_set_value() implementation in spear_gpio.c
Vipin Kumar
- [U-Boot] gpio: Question about gpio_set_value() implementation in spear_gpio.c
Axel Lin
- [U-Boot] Help with Glomation GESBC-9G20
Larry Baker
- [U-Boot] Help with Glomation GESBC-9G20
Bo Shen
- [U-Boot] Help with Glomation GESBC-9G20
Larry Baker
- [U-Boot] Help with Glomation GESBC-9G20
Bo Shen
- [U-Boot] Help with Glomation GESBC-9G20
Andreas Bießmann
- [U-Boot] Help with Glomation GESBC-9G20
Andreas Bießmann
- [U-Boot] Help with Glomation GESBC-9G20
Larry Baker
- [U-Boot] Help with Glomation GESBC-9G20
Bo Shen
- [U-Boot] Help with Glomation GESBC-9G20
Andreas Bießmann
- [U-Boot] Help with Glomation GESBC-9G20
Larry Baker
- [U-Boot] Help with Glomation GESBC-9G20
Bo Shen
- [U-Boot] Help with Glomation GESBC-9G20
Larry Baker
- [U-Boot] Help with Glomation GESBC-9G20
Andreas Bießmann
- [U-Boot] help with PCI RTL8139 on mpc5200
scinteeb
- [U-Boot] howto write uboot to nand
kqt4at5v at gmail.com
- [U-Boot] howto write uboot to nand
Scott Wood
- [U-Boot] howto write uboot to nand
Jason Cooper
- [U-Boot] image: Use ENOENT instead of ENOMEDIUM for better compatibility
Jeroen Hofstee
- [U-Boot] imx: Vybrid VF610 mac address issue
Andy Voltz
- [U-Boot] imx: Vybrid VF610 mac address issue
Fabio Estevam
- [U-Boot] imx: Vybrid VF610 mac address issue
Benoît Thébaudeau
- [U-Boot] imx: Vybrid VF610 mac address issue
Benoît Thébaudeau
- [U-Boot] imx: Vybrid VF610 mac address issue
Wang Huan-B18965
- [U-Boot] imx: Vybrid VF610 mac address issue
Benoît Thébaudeau
- [U-Boot] input: fix unaligned access in key_matrix_decode_fdt()
Tom Rini
- [U-Boot] input: fix unaligned access in key_matrix_decode_fdt()
Tom Rini
- [U-Boot] input: simplify key_matrix_decode_fdt()
Tom Rini
- [U-Boot] Maintain U-Boot splash until application is loaded
Otavio Salvador
- [U-Boot] Maintain U-Boot splash until application is loaded
Anatolij Gustschin
- [U-Boot] Merge Window close date
Masahiro Yamada
- [U-Boot] Merge Window close date
Wolfgang Denk
- [U-Boot] Merge Window close date
Masahiro Yamada
- [U-Boot] Merge Window close date
Wolfgang Denk
- [U-Boot] Merge Window close date
Masahiro Yamada
- [U-Boot] Merge Window close date
Wolfgang Denk
- [U-Boot] Merge Window close date
Masahiro Yamada
- [U-Boot] Merge Window close date
Albert ARIBAUD
- [U-Boot] Merge Window close date
Wolfgang Denk
- [U-Boot] Merge Window close date
Masahiro Yamada
- [U-Boot] Merge Window close date
Masahiro Yamada
- [U-Boot] Micron eMMC problem on sabre SD like card
jean-francois simon
- [U-Boot] Micron eMMC problem on sabre SD like card
Stefano Babic
- [U-Boot] Micron eMMC problem on sabre SD like card
Fabio Estevam
- [U-Boot] Micron eMMC problem on sabre SD like card
jean-francois simon
- [U-Boot] Micron eMMC problem on sabre SD like card
Fabio Estevam
- [U-Boot] MIPI-CSI Support question
Andy Fleming
- [U-Boot] MIPS FLASH mapping
Drassal, Allan
- [U-Boot] mmc write bug fix
Andy Fleming
- [U-Boot] mmc: fsl_esdhc: Fix hang after 'save' command
Andy Fleming
- [U-Boot] Modifying the Device tree fields
Kamaraj P
- [U-Boot] Modifying the Device tree fields
Tom Rini
- [U-Boot] Modifying the Device tree fields
Scott Wood
- [U-Boot] Modifying the Device tree fields
Kamaraj P
- [U-Boot] mtd: nand: fix initialization of BBT options
Scott Wood
- [U-Boot] nand onfi 8bit/16bit bus support
Michal Simek
- [U-Boot] nand onfi 8bit/16bit bus support
Scott Wood
- [U-Boot] nand onfi 8bit/16bit bus support
Michal Simek
- [U-Boot] net, cpsw: disable gigabit support through plattform data
Heiko Schocher
- [U-Boot] net, cpsw: disable gigabit support through plattform data
Tom Rini
- [U-Boot] net, cpsw: disable gigabit support through plattform data
Wolfgang Denk
- [U-Boot] net, cpsw: disable gigabit support through plattform data
Heiko Schocher
- [U-Boot] net, cpsw: disable gigabit support through plattform data
Mugunthan V N
- [U-Boot] net, cpsw: disable gigabit support through plattform data
Heiko Schocher
- [U-Boot] Not able to boot using zImage
Enric Balletbo Serra
- [U-Boot] Not able to boot using zImage
Tom Rini
- [U-Boot] Not able to boot using zImage
Enric Balletbo Serra
- [U-Boot] Not abled to upload binary using "dfu-util"
Sumit Gemini
- [U-Boot] Not abled to upload binary using "dfu-util"
Heiko Schocher
- [U-Boot] Not abled to upload binary using "dfu-util"
Sumit Gemini
- [U-Boot] Not abled to upload binary using "dfu-util"
Tom Rini
- [U-Boot] Not abled to upload binary using "dfu-util"
Sumit Gemini
- [U-Boot] Patch for RAMBOOT
Sadashiva Reddy
- [U-Boot] patches never reviewed
Angelo Dureghello
- [U-Boot] patches never reviewed
Scott Wood
- [U-Boot] patches never reviewed
Scott Wood
- [U-Boot] patches never reviewed
Jin Zhengxiong-R64188
- [U-Boot] patches never reviewed
Angelo Dureghello
- [U-Boot] patches never reviewed
Otavio Salvador
- [U-Boot] patches never reviewed
Jin Zhengxiong-R64188
- [U-Boot] PHY support for marvell 88E1111 chip
Sadashiva Reddy
- [U-Boot] phylib: add atheros ar803x phy
Heiko Schocher
- [U-Boot] phylib: add natsemi dp83630 phy
Heiko Schocher
- [U-Boot] Please pull u-boot-coldfire.git
Jin Zhengxiong-R64188
- [U-Boot] Please pull u-boot-coldfire.git
Tom Rini
- [U-Boot] Please pull u-boot-mmc.git
Andy Fleming
- [U-Boot] Please pull u-boot-mmc.git
Tom Rini
- [U-Boot] Please pull u-boot-mpc85xx.git
Andy Fleming
- [U-Boot] Please pull u-boot-mpc85xx.git
Tom Rini
- [U-Boot] Please pull u-boot-mpc85xx.git
Tom Rini
- [U-Boot] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] please pull u-boot-samsung master
Jagan Teki
- [U-Boot] please pull u-boot-samsung master
Albert ARIBAUD
- [U-Boot] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] please pull u-boot-samsung master
Albert ARIBAUD
- [U-Boot] please pull u-boot-samsung master
Jagan Teki
- [U-Boot] please pull u-boot-samsung master
Albert ARIBAUD
- [U-Boot] please pull u-boot-samsung master
Jagan Teki
- [U-Boot] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] please pull u-boot-samsung master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Lubomir Popov
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Igor Grinberg
- [U-Boot] Please pull u-boot-ti/master
Michael Trimarchi
- [U-Boot] Please pull u-boot-ti/master
Lubomir Popov
- [U-Boot] Please pull u-boot-ti/master
Michael Trimarchi
- [U-Boot] Please pull u-boot-ti/master
Lubomir Popov
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Porting U-boot-2013-04 to sdk for mips board
krishna dwivedi
- [U-Boot] Porting U-boot-2013-04 to sdk for mips board
Daniel Schwierzeck
- [U-Boot] Porting U-boot-2013-04 to sdk for mips board
krishna dwivedi
- [U-Boot] Porting U-boot-2013-04 to sdk for mips board
krishna dwivedi
- [U-Boot] powerpc/BSC9132: Add IFC bank count
Andy Fleming
- [U-Boot] powerpc/CoreNet: Allow pbl images to take u-boot images != 512K
Andy Fleming
- [U-Boot] powerpc/CoreNet: Allow pbl images to take u-boot images != 512K
chris packham
- [U-Boot] powerpc/mpc85xx: explicit cast the SDRAM size to type phys_size_t
Andy Fleming
- [U-Boot] powerpc/mpc85xx: work around erratum A-006593
Andy Fleming
- [U-Boot] powerpc/mpc85xx:Fix "boot page TLB" entry size for NAND SPL
Andy Fleming
- [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range
Jérôme Arzel
- [U-Boot] powerpc: mpc85xx/mpc86xx: Fix off-by-one boundary checking with ARRAY_SIZE
Andy Fleming
- [U-Boot] powerpc: Use lower case for the core names
Andy Fleming
- [U-Boot] PPC: 74xx/7xx: Pull request
Wolfgang Denk
- [U-Boot] PPC: 74xx/7xx: Pull request
Tom Rini
- [U-Boot] PPC: MPC5xxx Pull request
Wolfgang Denk
- [U-Boot] PPC: MPC5xxx Pull request
Tom Rini
- [U-Boot] PPC: MPC8xx / MPC82xx: Pull request
Wolfgang Denk
- [U-Boot] PPC: MPC8xx / MPC82xx: Pull request
Tom Rini
- [U-Boot] Pull request for u-boot-marvell.git
Prafulla Wadaskar
- [U-Boot] Pull request for u-boot-marvell.git
Albert ARIBAUD
- [U-Boot] pull request for u-boot-tegra/master into ARM/master
Tom Warren
- [U-Boot] pull request for u-boot-tegra/master into ARM/master
Albert ARIBAUD
- [U-Boot] Pull request v2: nand flash
Scott Wood
- [U-Boot] Pull request v2: nand flash
Tom Rini
- [U-Boot] Pull request: nand flash
Tom Rini
- [U-Boot] Pull request: nand flash
Scott Wood
- [U-Boot] Pull request: nand flash
Tom Rini
- [U-Boot] Pull request: nand flash
Scott Wood
- [U-Boot] pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] pull request: u-boot-arm/master
Tom Rini
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Tom Rini
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Jagannadha Sutradharudu Teki
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Jagan Teki
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Jagan Teki
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Jagannadha Sutradharudu Teki
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] Pull request: u-boot-video/master
Anatolij Gustschin
- [U-Boot] Pull request: u-boot-video/master
Tom Rini
- [U-Boot] README: align default commands with code
Tom Rini
- [U-Boot] Regression due to 020bbcb "usb: hub: Power-cycle on root-hub ports"
Marek Vasut
- [U-Boot] Regression due to 020bbcb "usb: hub: Power-cycle on root-hub ports"
Stephen Warren
- [U-Boot] Save flash from U-Boot
Szabolcs Sipos
- [U-Boot] Save flash from U-Boot
Wolfgang Denk
- [U-Boot] Save flash from U-Boot
Szabolcs Sipos
- [U-Boot] Save flash from U-Boot
Wolfgang Denk
- [U-Boot] Save flash from U-Boot
Szabolcs Sipos
- [U-Boot] serial: Use ARRAY_SIZE instead of reinventing it
Tom Rini
- [U-Boot] Setting Ethernet Speed in NFS boot
Sandeep C R
- [U-Boot] Setting Ethernet Speed in NFS boot
Wolfgang Denk
- [U-Boot] spi: armada100_spi: Remove unnecessary NULL test for dout and din
Jagan Teki
- [U-Boot] spi: cf_spi: Question about checking (dspi->sr & 0x0000F000) witch magic number 4
Axel Lin
- [U-Boot] stb7100mboard
holovati
- [U-Boot] TFTP timeouts, i.mx fec problem?
Ruud Commandeur
- [U-Boot] TFTP timeouts, i.mx fec problem?
Fabio Estevam
- [U-Boot] TFTP timeouts, i.mx fec problem?
Marek Vasut
- [U-Boot] TFTP timeouts, i.mx fec problem?
Fabio Estevam
- [U-Boot] TFTP timeouts, i.mx fec problem?
Marek Vasut
- [U-Boot] TFTP timeouts, i.mx fec problem?
Ruud Commandeur
- [U-Boot] TFTP timeouts, i.mx fec problem?
Eric Bénard
- [U-Boot] TFTP timeouts, i.mx fec problem?
Ruud Commandeur
- [U-Boot] TFTP timeouts, i.mx fec problem?
Wolfgang Denk
- [U-Boot] TFTP timeouts, i.mx fec problem?
Ruud Commandeur
- [U-Boot] Tomorrows updates, today!
Tom Rini
- [U-Boot] TPM patches to pull if you wish
Simon Glass
- [U-Boot] TPM patches to pull if you wish
Tom Rini
- [U-Boot] U-Boot build issue
Marek Vasut
- [U-Boot] U-Boot build issue
Wolfgang Denk
- [U-Boot] U-Boot build issue
Marek Vasut
- [U-Boot] U-Boot build issue
Marek Vasut
- [U-Boot] U-Boot build issue
Tom Rini
- [U-Boot] U-Boot build issue
Marek Vasut
- [U-Boot] u-boot can boot Linux in zImage format while not in uImage format
Wolfgang Denk
- [U-Boot] u-boot can boot Linux in zImage format while not in uImage format
Bo Shen
- [U-Boot] u-boot can boot Linux in zImage format while not in uImage format
Fabio Estevam
- [U-Boot] u-boot can boot Linux in zImage format while not in uImage format
Bo Shen
- [U-Boot] u-boot can boot Linux in zImage format while not in uImage format
Bo Shen
- [U-Boot] u-boot compile error
Simon Glass
- [U-Boot] U-Boot Digest, Vol 61, Issue 36
krishna dwivedi
- [U-Boot] U-Boot Digest, Vol 61, Issue 36
krishna dwivedi
- [U-Boot] U-Boot Digest, Vol 61, Issue 36
krishna dwivedi
- [U-Boot] U-Boot Digest, Vol 61, Issue 36
Wolfgang Denk
- [U-Boot] U-Boot Digest, Vol 61, Issue 36
Daniel Schwierzeck
- [U-Boot] U-Boot fit_image_load() refactor patches
Simon Glass
- [U-Boot] U-Boot fit_image_load() refactor patches
Simon Glass
- [U-Boot] U-boot for 64bit ARMv8
Richard Schmitt
- [U-Boot] U-boot for 64bit ARMv8
Tom Rini
- [U-Boot] U-boot for 64bit ARMv8
Albert ARIBAUD
- [U-Boot] U-boot for 64bit ARMv8
Tom Rini
- [U-Boot] U-boot for 64bit ARMv8
Albert ARIBAUD
- [U-Boot] U-boot2013:07-Recompile with -fPIC error for mips64 board
Wolfgang Denk
- [U-Boot] U-boot2013:07-Recompile with -fPIC error for mips64 board
krishna dwivedi
- [U-Boot] U-boot2013:07-Recompile with -fPIC error for mips64 board
krishna dwivedi
- [U-Boot] U-Boot: am335x video support
Heiko Schocher
- [U-Boot] U-Boot: am335x video support
Matthias Fuchs
- [U-Boot] U-Boot: am335x video support
Heiko Schocher
- [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device
Sourav Poddar
- [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device
Jagan Teki
- [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device
Jagan Teki
- [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device
Jagan Teki
- [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device
Jagan Teki
- [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device
Jagan Teki
- [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device
Jagan Teki
- [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device
Sourav Poddar
- [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device
Jagan Teki
- [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device
Sourav Poddar
- [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device
Jagan Teki
- [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device
Sourav Poddar
- [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device
Sourav Poddar
- [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device
Sourav Poddar
- [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device
Sourav Poddar
- [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device
Sourav Poddar
- [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device
Sourav Poddar
- [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device
Sourav Poddar
- [U-Boot] UbiFS recovery
Karsten Jeppesen
- [U-Boot] UbiFS recovery
Henrik Bork Steffensen
- [U-Boot] uboot ERROR cannot umount.
mind entropy
- [U-Boot] uboot ERROR cannot umount.
Albert ARIBAUD
- [U-Boot] uboot ERROR nfs: Cannot umount error
jinghui shi
- [U-Boot] uboot ERROR nfs: Cannot umount error
Wolfgang Denk
- [U-Boot] uboot ERROR nfs: Cannot umount error
jinghui shi
- [U-Boot] usb, composite: after unregister gadget driver set composite to NULL
Marek Vasut
- [U-Boot] usb, composite: after unregister gadget driver set composite to NULL
Heiko Schocher
- [U-Boot] usb, composite: after unregister gadget driver set composite to NULL
Lukasz Majewski
- [U-Boot] usb, g_dnl: make possibility to fixup the device_desc board specific
Heiko Schocher
- [U-Boot] usb, g_dnl: make possibility to fixup the device_desc board specific
Lukasz Majewski
- [U-Boot] usb, musb-new: add wdt trigger
Heiko Schocher
- [U-Boot] Version 3 of Kirkwood and env_nand improvements
Phil Sutter
- [U-Boot] Vybrid VF610 mac address issue
Wang Huan-B18965
Last message date:
Sun Jun 30 18:38:15 CEST 2013
Archived on: Sun Jun 30 18:38:49 CEST 2013
This archive was generated by
Pipermail 0.09 (Mailman edition).