[U-Boot] [ANN] v2013.07-rc1

[Lubomir Popov]

Hi Simon,

> Hi Lubo,
>
> On Sun, Jun 16, 2013 at 4:49 AM, Lubomir Popov <lpopov at mm-sol.com> wrote:
>
>> Hi Tom,
>>
>> > Hey all,
>> >
>> > I've tagged and pushed v2013.07-rc1.  Lots of things all over the place.
>> > If you've got changes outstanding still, please start gently poking
>> > custodians with patchwork links.  I've got a good bit of stuff I need to
>> > deal with myself still, but please prod me all the same.
>> >
>> I've just made a clean clone of u-boot/master and tried to build my board
>> (after adding what's needed), and then also the omap5_uevm. In both cases
>> the build fails with following error:
>>
>> gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -include
>> /Users/imac/Documents/UB2013.07/include/libfdt_env.h -idirafter
>> /Users/imac/Documents/UB2013.07/include -idirafter
>> /Users/imac/Documents/UB2013.07/include2 -idirafter
>> /Users/imac/Documents/UB2013.07/include -I
>> /Users/imac/Documents/UB2013.07/lib/libfdt -I
>> /Users/imac/Documents/UB2013.07/tools -DCONFIG_SYS_TEXT_BASE=0x80E80000
>> -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -c -o image-fit.o
>> /Users/imac/Documents/UB2013.07/common/image-fit.c
>> /Users/imac/Documents/UB2013.07/common/image-fit.c: In function
>> 'fit_image_load':
>> /Users/imac/Documents/UB2013.07/common/image-fit.c:1560:11: error:
>> 'ENOMEDIUM' undeclared (first use in this function)
>> /Users/imac/Documents/UB2013.07/common/image-fit.c:1560:11: note: each
>> undeclared identifier is reported only once for
>> each function it appears in
>> make[1]: *** [image-fit.o] Error 1
>> make: *** [tools] Error 2
>> Lubos-iMac:UB2013.07 imac$
>>
>> All #include stuff seems OK. Any ideas?
>>
>
> That might be a MacOS thing - I haven't quite had the patience to get a dev
> environment going on a Mac yet.
>
> Please can you try this patch and see if it helps?
>
> http://patchwork.ozlabs.org/patch/251685/

Many thanks for the hint - I didn't realize immediately that
this is host stuff. U-boot now builds normally (and runs on
my board :)).

BTW, until this release I've been using a Mac at home to build
and run U-Boot without any major issues (actually only make
distclean fails, which is not crucial).

Thanks,
Lubo

>
> Regards,
> Simon
>
>
>>
>> Regards,
>> Lubo
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>>
>