[U-Boot] [ANN] v2013.07-rc1

[Simon Glass]

Hi Lubo,

On Sun, Jun 16, 2013 at 9:35 AM, Lubomir Popov <lpopov at mm-sol.com> wrote:

> Hi Simon,
>
> > Hi Lubo,
> >
> > On Sun, Jun 16, 2013 at 4:49 AM, Lubomir Popov <lpopov at mm-sol.com>
> wrote:
> >
> >> Hi Tom,
> >>
> >> > Hey all,
> >> >
> >> > I've tagged and pushed v2013.07-rc1.  Lots of things all over the
> place.
> >> > If you've got changes outstanding still, please start gently poking
> >> > custodians with patchwork links.  I've got a good bit of stuff I need
> to
> >> > deal with myself still, but please prod me all the same.
> >> >
> >> I've just made a clean clone of u-boot/master and tried to build my
> board
> >> (after adding what's needed), and then also the omap5_uevm. In both
> cases
> >> the build fails with following error:
> >>
> >> gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -include
> >> /Users/imac/Documents/UB2013.07/include/libfdt_env.h -idirafter
> >> /Users/imac/Documents/UB2013.07/include -idirafter
> >> /Users/imac/Documents/UB2013.07/include2 -idirafter
> >> /Users/imac/Documents/UB2013.07/include -I
> >> /Users/imac/Documents/UB2013.07/lib/libfdt -I
> >> /Users/imac/Documents/UB2013.07/tools -DCONFIG_SYS_TEXT_BASE=0x80E80000
> >> -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -c -o image-fit.o
> >> /Users/imac/Documents/UB2013.07/common/image-fit.c
> >> /Users/imac/Documents/UB2013.07/common/image-fit.c: In function
> >> 'fit_image_load':
> >> /Users/imac/Documents/UB2013.07/common/image-fit.c:1560:11: error:
> >> 'ENOMEDIUM' undeclared (first use in this function)
> >> /Users/imac/Documents/UB2013.07/common/image-fit.c:1560:11: note: each
> >> undeclared identifier is reported only once for
> >> each function it appears in
> >> make[1]: *** [image-fit.o] Error 1
> >> make: *** [tools] Error 2
> >> Lubos-iMac:UB2013.07 imac$
> >>
> >> All #include stuff seems OK. Any ideas?
> >>
> >
> > That might be a MacOS thing - I haven't quite had the patience to get a
> dev
> > environment going on a Mac yet.
> >
> > Please can you try this patch and see if it helps?
> >
> > http://patchwork.ozlabs.org/patch/251685/
>
> Many thanks for the hint - I didn't realize immediately that
> this is host stuff. U-boot now builds normally (and runs on
> my board :)).
>
> BTW, until this release I've been using a Mac at home to build
> and run U-Boot without any major issues (actually only make
> distclean fails, which is not crucial).
>

We have done a few fixes with 'make distclean' before - is this
MacOS-specific, or s general bug?

Regards,
Simon