[U-Boot] [PATCH] video: mxsfb: Break the line in videomode message

[Stefano Babic]

Hi Fabio, hi Marek,

On 26/06/2013 21:56, Marek Vasut wrote:
> Dear Fabio Estevam,
> 
>> Currently we have the following on boot:
>>
>> CPU:   Freescale i.MX28 rev1.2 at 454 MHz
>> BOOT:  SSP SD/MMC #0, 3V3
>> DRAM:  128 MiB
>> MMC:   MXS MMC: 0
>> Video: MXSFB: 'videomode' variable not set!In:    serial
>>
>> Break the line of the warning message in order to have a better reading
>> format.
>>
>> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
>> ---
>>  drivers/video/mxsfb.c | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
>> index b189419..411d356 100644
>> --- a/drivers/video/mxsfb.c
>> +++ b/drivers/video/mxsfb.c
>> @@ -137,7 +137,7 @@ void *video_hw_init(void)
>>  	/* Suck display configuration from "videomode" variable */
>>  	penv = getenv("videomode");
>>  	if (!penv) {
>> -		printf("MXSFB: 'videomode' variable not set!");
>> +		printf("MXSFB: 'videomode' variable not set!\n");
> 
> puts() ... and you might want to fix it in all drivers ;-)
> 

That is correct - as it is a very small change, I fix it myself by
applying the patch.

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================