[U-Boot] [PATCH] video: mxsfb: Break the line in videomode message

[Marek Vasut]

Dear Fabio Estevam,

> Currently we have the following on boot:
> 
> CPU:   Freescale i.MX28 rev1.2 at 454 MHz
> BOOT:  SSP SD/MMC #0, 3V3
> DRAM:  128 MiB
> MMC:   MXS MMC: 0
> Video: MXSFB: 'videomode' variable not set!In:    serial
> 
> Break the line of the warning message in order to have a better reading
> format.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>  drivers/video/mxsfb.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
> index b189419..411d356 100644
> --- a/drivers/video/mxsfb.c
> +++ b/drivers/video/mxsfb.c
> @@ -137,7 +137,7 @@ void *video_hw_init(void)
>  	/* Suck display configuration from "videomode" variable */
>  	penv = getenv("videomode");
>  	if (!penv) {
> -		printf("MXSFB: 'videomode' variable not set!");
> +		printf("MXSFB: 'videomode' variable not set!\n");

puts() ... and you might want to fix it in all drivers ;-)

>  		return NULL;
>  	}

Best regards,
Marek Vasut