[U-Boot] [PATCH V2 09/12] mmc: omap_hsmmc: add mmc1 pbias, ldo1

[Lubomir Popov]

Hi Nishanth,

On 05/06/13 17:01, Nishanth Menon wrote:
> On Wed, Jun 5, 2013 at 3:03 AM, Lubomir Popov <lpopov at mm-sol.com> wrote:
>> Hi Tom,
>>
>> On 05/06/13 00:06, Tom Rini wrote:
>>> On Mon, Jun 03, 2013 at 10:58:27PM +0300, Lubomir Popov wrote:
>>>> Hi Lokesh,
>>>>
>>>>> Hi Lubomir,
>>>>> On Thursday 30 May 2013 07:56 PM, Lubomir Popov wrote:
>>>>>> Hi Lokesh,
>>>>>>
>>>>>> On 30/05/13 16:19, Lokesh Vutla wrote:
>>>>>>> From: Balaji T K <balajitk at ti.com>
>>>>>>>
>>>>>>> add dra mmc pbias support and ldo1 power on
>>>>>>>
>>>>>>> Signed-off-by: Balaji T K <balajitk at ti.com>
>>>>>>> Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
>>>>>>> ---
>>>>>>>   arch/arm/include/asm/arch-omap5/omap.h |    3 ++-
>>>>>>>   drivers/mmc/omap_hsmmc.c               |   26 ++++++++++++++------------
>>>>>>>   drivers/power/palmas.c                 |   25 ++++++++++++++++++++++++-
>>>>>>>   include/configs/omap5_common.h         |    4 ++++
>>>>>>>   include/configs/omap5_uevm.h           |    5 -----
>>>>>>>   include/palmas.h                       |    6 +++++-
>>>>>>>   6 files changed, 49 insertions(+), 20 deletions(-)
>>>>>>>
>>>> [snip]
>>>>>>> + /* set LDO9 TWL6035 to 3V */
>>>>>> LDO9? TWL6035? If this function is used on the DRA7xx boards only (with
>>>>>> TPS659038), you should add some comment above.
>>>>> Ok ll add the comment.
>>>>>>
>>>>>>> + val = 0x2b; /* (3 - 0.9) * 20 + 1 */
>>>>>> Why not use definitions for the voltage? You could take them from
>>>>>> http://patchwork.ozlabs.org/patch/244103/ where some values are
>>>>>> defined.
>>>>> Yes, Ill rebase this patch on top of your patch and use those defines.
>>>> Please be aware that my above mentioned patch has not been reviewed/
>>>> tested/acked/nacked/whatever by nobody (except possibly a quick look by
>>>> Nishanth Menon, who had some objections). I wrote it when bringing up a
>>>> custom OMAP5 board, and most probably it shall not go into mainline in
>>>> its current form, if ever. I gave it only as an example of how things
>>>> could be done cleaner. Feel free to use the code as you wish, but I'm
>>>> afraid that applying it as a patch to your tree and basing upon it might
>>>> run you into problems when you later sync with mainline.
>>>>
>>>> Tom, your opinion?
>>>
>>> OK, so at the time it was "nothing will really use this code except test
>>> functions".  Looks like we have a use for mmc1_ldo9 code at least, so
>>> lets rework the first patch for adding that + cleanups wrt constants.
>> Well, I'm not quite sure that this LDO9 function would be the only one
>> used (or LDO1 on the DRA7xx board). Judging from omapboot for the OMAP5
>> boards for example, SMPS7 (it delivers the common 1.8 V I/O supply) is
>> set to 'Forced PWM' mode in order to reduce board noise - there sure has
>> been a reason to do so and sacrifice converter efficiency. Therefore I
>> added similar functionality in my patch to the Palmas driver (and am
>> explicitly calling it in my board init).
>> The option to bypass LDO9 on OMAP5+TWL603x boards seems quite mandatory
>> as well, if hardware is designed such that the SD card socket has a
>> separate fixed 3.3 V supply which also powers the LDO9 input (the
>> uEVM for example). On the DRA7xx+TPS659038 board the power scheme is
>> different and this does not apply.
>>
> 
> I hate this code for many reasons -
> a) hsmmc is used on many OMAP and DM platforms to my knowledge.
> b) what is being done here is to power on the LDO supplying MMC.
Sorry, but I can't get if hsmmc is discussed here, or power.

For OMAP5+TWL603x the LDO powering MMC (actually the removable card
interface only; eMMC is another story) is turned on automatically at
power-on by the PMIC sequencer, with a default voltage and mode --
otherwise we would not be able to boot from a card (ROM code does not
touch the PMIC at all). We are talking here about the possibility to
have additional control over this LDO, which should be board-specific,
I agree. On the OMAP5 boards, for example, the call to
palmas_mmc1_poweron_ldo() from within omap_hsmmc actually does not
turn on LDO9 - it is on at this moment anyway. The call just makes
it switch from the default bypass mode (with Vout = Vin = 3.3 V) to
regulation mode and Vout = 3.0 V. Why is this done is yet another
question; to me it seems useless (and possibly wrong) when the card
is powered with a fixed voltage of 3.3 V.
Therefore it seems reasonable to count on the PMIC defaults and
remove this call from omap_hsmmc altogether, thus disengaging the
PMIC driver from hsmmc, at least for OMAP5.

For OMAP4 things are somewhat different. Here the TWL6030 PMIC powers
both the OMAP interface and the card socket, and in addition can
automatically power off the MMC LDO upon detecting card removal.
ROM code *does* access the MMC LDO to turn it on and set it to 3.0 V
(it starts by default at 1.8 V), but only if booting from a card.
So here the call to PMIC driver should stay.

Other OMAPs and derivatives - other scenarios.

Anyway, omap_hsmmc.c is built for TI platforms only. If you mean
the #ifdefs here, yes, things could be cleaned up by moving the SoC-
specific pbias stuff to the corresponding board files (with the
expense of redundancy), but this is quite an amount of work... I'm
not volunteering... ;) Moreover, this particular patch is not mine.

> 
> The implementation *should* be board specific! not an #ifdef madness
> which works only on TI platforms.
> 
> Regards,
> Nishanth Menon
> 
Best regards,
Lubo