[U-Boot] [ANN] v2013.07-rc1

[Lubomir Popov]

Hi Simon,

> Hi Lubo,
>
> On Sun, Jun 16, 2013 at 9:35 AM, Lubomir Popov <lpopov at mm-sol.com> wrote:
>
>> Hi Simon,
>>
>> > Hi Lubo,
>> >
>> > On Sun, Jun 16, 2013 at 4:49 AM, Lubomir Popov <lpopov at mm-sol.com>
>> wrote:
>> >
>> >> Hi Tom,
>> >>
>> >> > Hey all,
>> >> >
>> >> > I've tagged and pushed v2013.07-rc1.  Lots of things all over the
>> place.
>> >> > If you've got changes outstanding still, please start gently poking
>> >> > custodians with patchwork links.  I've got a good bit of stuff I need
>> to
>> >> > deal with myself still, but please prod me all the same.
>> >> >
>> >> I've just made a clean clone of u-boot/master and tried to build my
>> board
>> >> (after adding what's needed), and then also the omap5_uevm. In both
>> cases
>> >> the build fails with following error:
>> >>
>> >> gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -include
>> >> /Users/imac/Documents/UB2013.07/include/libfdt_env.h -idirafter
>> >> /Users/imac/Documents/UB2013.07/include -idirafter
>> >> /Users/imac/Documents/UB2013.07/include2 -idirafter
>> >> /Users/imac/Documents/UB2013.07/include -I
>> >> /Users/imac/Documents/UB2013.07/lib/libfdt -I
>> >> /Users/imac/Documents/UB2013.07/tools -DCONFIG_SYS_TEXT_BASE=0x80E80000
>> >> -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -c -o image-fit.o
>> >> /Users/imac/Documents/UB2013.07/common/image-fit.c
>> >> /Users/imac/Documents/UB2013.07/common/image-fit.c: In function
>> >> 'fit_image_load':
>> >> /Users/imac/Documents/UB2013.07/common/image-fit.c:1560:11: error:
>> >> 'ENOMEDIUM' undeclared (first use in this function)
>> >> /Users/imac/Documents/UB2013.07/common/image-fit.c:1560:11: note: each
>> >> undeclared identifier is reported only once for
>> >> each function it appears in
>> >> make[1]: *** [image-fit.o] Error 1
>> >> make: *** [tools] Error 2
>> >> Lubos-iMac:UB2013.07 imac$
>> >>
>> >> All #include stuff seems OK. Any ideas?
>> >>
>> >
>> > That might be a MacOS thing - I haven't quite had the patience to get a
>> dev
>> > environment going on a Mac yet.
>> >
>> > Please can you try this patch and see if it helps?
>> >
>> > http://patchwork.ozlabs.org/patch/251685/
>>
>> Many thanks for the hint - I didn't realize immediately that
>> this is host stuff. U-boot now builds normally (and runs on
>> my board :)).
>>
>> BTW, until this release I've been using a Mac at home to build
>> and run U-Boot without any major issues (actually only make
>> distclean fails, which is not crucial).
>>
>
> We have done a few fixes with 'make distclean' before - is this
> MacOS-specific, or s general bug?

Well, I'm not a UNIX expert (nor Linux; in fact I'm more in
hardware). I get this:

Lubos-iMac:UB2013.07 imac$ make CROSS_COMPILE=" arm-none-eabi-" distclean
rm: SPL: is a directory
make: *** [clobber] Error 1
Lubos-iMac:UB2013.07 imac$

For OMAP we don't have a 'SPL' file; there is the 'spl' directory
however, and although MacOS is case-sensitive, this somehow produces
the error in '@rm -f $(obj)SPL' (clobber: of main Makefile).

>
> Regards,
> Simon
>
Best regards,
Lubo