[U-Boot] [PATCH v2 0/3] net2big_v2: initialize fan and LEDs at startup

Prafulla Wadaskar prafulla at marvell.com
Thu Jun 20 07:37:43 CEST 2013



> -----Original Message-----
> From: Prafulla Wadaskar
> Sent: 20 June 2013 10:46
> To: 'Simon Guinot'
> Cc: Albert ARIBAUD; u-boot at lists.denx.de
> Subject: RE: [PATCH v2 0/3] net2big_v2: initialize fan
> and LEDs at startup
> 
> 
> 
> > -----Original Message-----
> > From: Simon Guinot [mailto:simon.guinot at sequanux.org]
> > Sent: 18 June 2013 18:45
> > To: Prafulla Wadaskar
> > Cc: Albert ARIBAUD; u-boot at lists.denx.de
> > Subject: [PATCH v2 0/3] net2big_v2: initialize fan
> and
> > LEDs at startup
> >
> > This patch series allows to initialize the fan and
> the
> > LEDs found on the
> > net2big_v2.
> >
> > Changes in v2:
> > - Add Prafulla's Acked-by to patch
> >   "net2big_v2: initialize I2C fan at startup"
> > - Rename gpio-ext into cpld-gpio-bus and adjust code
> > and comments
> >   accordingly.
> >
> > Simon Guinot (3):
> >   net2big_v2: initialize I2C fan at startup
> >   LaCie/common: add support for the CPLD GPIO bus
> >   net2big_v2: initialize LEDs at startup
> >
> >  board/LaCie/common/cpld-gpio-bus.c  |   50
> > ++++++++++++
> >  board/LaCie/common/cpld-gpio-bus.h  |   24 ++++++
> >  board/LaCie/net2big_v2/Makefile     |    3 +
> >  board/LaCie/net2big_v2/net2big_v2.c |  154
> > +++++++++++++++++++++++++++++++++--
> >  board/LaCie/net2big_v2/net2big_v2.h |    5 ++
> >  include/configs/lacie_kw.h          |    9 +-
> >  6 files changed, 236 insertions(+), 9 deletions(-)
> >  create mode 100644 board/LaCie/common/cpld-gpio-
> bus.c
> >  create mode 100644 board/LaCie/common/cpld-gpio-
> bus.h
> >
> 
> Acked-by: Prafulla Wadaskar <prafulla at marvell.com>
> 
> For entire patch series.
> Will be pulled soon.

Applied to u-boot-marvell.git master branch

Regards...
Prafulla . . .


More information about the U-Boot mailing list