[U-Boot] [PATCH v2 0/3] net2big_v2: initialize fan and LEDs at startup

[Prafulla Wadaskar]

> -----Original Message-----
> From: Simon Guinot [mailto:simon.guinot at sequanux.org]
> Sent: 18 June 2013 18:45
> To: Prafulla Wadaskar
> Cc: Albert ARIBAUD; u-boot at lists.denx.de
> Subject: [PATCH v2 0/3] net2big_v2: initialize fan and
> LEDs at startup
> 
> This patch series allows to initialize the fan and the
> LEDs found on the
> net2big_v2.
> 
> Changes in v2:
> - Add Prafulla's Acked-by to patch
>   "net2big_v2: initialize I2C fan at startup"
> - Rename gpio-ext into cpld-gpio-bus and adjust code
> and comments
>   accordingly.
> 
> Simon Guinot (3):
>   net2big_v2: initialize I2C fan at startup
>   LaCie/common: add support for the CPLD GPIO bus
>   net2big_v2: initialize LEDs at startup
> 
>  board/LaCie/common/cpld-gpio-bus.c  |   50
> ++++++++++++
>  board/LaCie/common/cpld-gpio-bus.h  |   24 ++++++
>  board/LaCie/net2big_v2/Makefile     |    3 +
>  board/LaCie/net2big_v2/net2big_v2.c |  154
> +++++++++++++++++++++++++++++++++--
>  board/LaCie/net2big_v2/net2big_v2.h |    5 ++
>  include/configs/lacie_kw.h          |    9 +-
>  6 files changed, 236 insertions(+), 9 deletions(-)
>  create mode 100644 board/LaCie/common/cpld-gpio-bus.c
>  create mode 100644 board/LaCie/common/cpld-gpio-bus.h
> 

Acked-by: Prafulla Wadaskar <prafulla at marvell.com> 

For entire patch series.
Will be pulled soon.

Regards...
Prafulla . . .