[U-Boot] Pull request: u-boot-arm/master
Tom Rini
trini at ti.com
Mon Jun 24 22:17:31 CEST 2013
On Fri, Jun 21, 2013 at 11:52:51PM +0200, Albert ARIBAUD wrote:
> Hello Tom,
>
> The following changes since commit
> 847e6693ccb529bf8346db62876f38f0c4e04ade:
>
> arm: pxa: config option for PXA270 turbo mode (2013-06-12 22:24:12
> +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm master
>
> for you to fetch changes up to fbf87b1823dd5ebc2a384711ea2c677543019ece:
>
> arm: optimize relocate_code routine (2013-06-21 23:05:50 +0200)
>
> ----------------------------------------------------------------
> Akshay Saraswat (2):
> Exynos5: clock: Update the equation to calculate PLL output
> frequency Exynos: uart: s5p: enabling the uart tx/rx fifo
>
> Albert ARIBAUD (8):
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
> Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
> arm: ensure u-boot only uses relative relocations
> remove all references to .dynsym
> arm: generalize lib/bss.c into lib/sections.c
> arm: make __image_copy_{start, end} compiler-generated
> arm: make __rel_dyn_{start, end} compiler-generated
> arm: optimize relocate_code routine
>
> Amar (9):
> FDT: Add compatible string for DWMMC
> EXYNOS5: FDT: Add DWMMC device node data
> DWMMC: Initialise dwmci and resolve EMMC read write issues
> EXYNOS5: DWMMC: Added FDT support for DWMMC
> EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted
> results. SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
> MMC: APIs to support resize of EMMC boot partition
> SMDK5250: Enable EMMC booting
> COMMON: MMC: Command to support EMMC booting and to resize EMMC
> boot partition
>
> Arkadiusz Wlodarczyk (1):
> arm:trats: change auto-booting to boot kernel with separate
> device tree blob
>
> Dan Murphy (5):
> arm: omap: Add check for fdtfile in the findfdt macro
> arm: omap5_uevm: Correct the console sys prompt for 5432
> arm: dra7xx: Update the EXTRA_ENV_SETTINGS
> arm: omap4: panda: Add reading of the board revision
> arm: omap4: panda: Fix checkpatch on panda file
>
> Heiko Schocher (3):
> arm, am33xx: move rtc32k_enable() to common place
> arm, am335x: make mpu pll config configurable
> arm, am33xx: move uart soft reset code to common place
>
> Inderpal Singh (3):
> exynos: move tzpc_init to armv7/exynos
> exynos: update tzpc to make it common for exynos4 and exynos5
> exynos: Update origen and smdkv310 to use common tzpc_init
>
> Naveen Krishna Chatradhi (2):
> power: exynos-tmu: fix warnings and clean up code
> power: exynos-tmu: use the mux_addr bit fields in tmu_control
> register
>
> Rajeshwari Shinde (3):
> SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
> SMDK5250: Enable SPI Gigabyte device.
> MMC: DWMMC: Fix FIFO_DEPTH calculation
>
> Simon Guinot (3):
> net2big_v2: initialize I2C fan at startup
> LaCie/common: add support for the CPLD GPIO bus
> net2big_v2: initialize LEDs at startup
>
> Makefile | 7 +
> arch/arm/config.mk | 5 +
> arch/arm/cpu/arm920t/ep93xx/u-boot.lds | 6 +-
> arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 5 -
> arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 5 -
> arch/arm/cpu/armv7/am33xx/board.c | 40 ++
> arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 9 +-
> arch/arm/cpu/armv7/exynos/Makefile | 2 +-
> arch/arm/cpu/armv7/exynos/clock.c | 10 +-
> .../arm/cpu/armv7/exynos/tzpc.c | 25 +-
> arch/arm/cpu/armv7/s5p-common/Makefile | 2 +
> arch/arm/cpu/ixp/u-boot.lds | 20 +-
> arch/arm/cpu/u-boot-spl.lds | 6 +-
> arch/arm/cpu/u-boot.lds | 21 +-
> arch/arm/dts/exynos5250.dtsi | 33 ++
> arch/arm/include/asm/arch-am33xx/sys_proto.h | 4 +
> arch/arm/include/asm/arch-exynos/cpu.h | 4 +
> arch/arm/include/asm/arch-exynos/dwmmc.h | 11 +-
> arch/arm/include/asm/arch-exynos/tmu.h | 58 ++-
> arch/arm/include/asm/arch-exynos/tzpc.h | 20 +
> arch/arm/lib/Makefile | 2 +-
> arch/arm/lib/relocate.S | 61 +--
> arch/arm/lib/{bss.c => sections.c} | 8 +-
> board/LaCie/common/cpld-gpio-bus.c | 50 +++
> board/LaCie/common/cpld-gpio-bus.h | 24 ++
> board/LaCie/net2big_v2/Makefile | 3 +
> board/LaCie/net2big_v2/net2big_v2.c | 154 +++++++-
> board/LaCie/net2big_v2/net2big_v2.h | 5 +
> board/actux1/u-boot.lds | 20 +-
> board/actux2/u-boot.lds | 20 +-
> board/actux3/u-boot.lds | 20 +-
> board/ait/cam_enc_4xx/u-boot-spl.lds | 5 -
> board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 5 -
> board/davinci/da8xxevm/u-boot-spl-hawk.lds | 1 -
> board/dvlhost/u-boot.lds | 20 +-
> board/freescale/mx31ads/u-boot.lds | 20 +-
> board/isee/igep0033/board.c | 40 +-
> board/phytec/pcm051/board.c | 39 +-
> board/samsung/dts/exynos5250-smdk5250.dts | 24 ++
> board/samsung/origen/lowlevel_init.S | 44 +--
> board/samsung/origen/origen_setup.h | 25 --
> board/samsung/smdk5250/Makefile | 5 +-
> board/samsung/smdk5250/clock_init.c | 18 +
> board/samsung/smdk5250/clock_init.h | 5 +
> board/samsung/smdk5250/exynos5-dt.c | 423
> +++++++++++++++++++++
> board/samsung/smdk5250/lowlevel_init.S | 2 +
> board/samsung/smdk5250/setup.h | 25 --
> board/samsung/smdk5250/smdk5250.c | 223 +++--------
> board/samsung/smdk5250/spl_boot.c | 64 +++-
> board/samsung/smdkv310/lowlevel_init.S | 60 +--
> board/ti/am335x/board.c | 39 +-
> board/ti/panda/panda.c | 104 ++++-
> board/ti/ti814x/evm.c | 35 +-
> board/vpac270/u-boot-spl.lds | 6 +-
> common/cmd_mmc.c | 109 +++++-
> doc/device-tree-bindings/exynos/dwmmc.txt | 54 +++
> drivers/mmc/dw_mmc.c | 27 +-
> drivers/mmc/exynos_dw_mmc.c | 127 ++++++-
> drivers/mmc/mmc.c | 134 +++++++
> drivers/mtd/spi/Makefile | 1 +
> drivers/mtd/spi/gigadevice.c | 81 ++++
> drivers/mtd/spi/spi_flash.c | 3 +
> drivers/mtd/spi/spi_flash_internal.h | 1 +
> drivers/power/exynos-tmu.c | 123 +++---
> drivers/serial/serial_s5p.c | 13 +-
> drivers/video/exynos_fb.c | 4 +-
> include/asm-generic/sections.h | 3 -
> include/configs/am335x_evm.h | 7 +-
> include/configs/dra7xx_evm.h | 3 +
> include/configs/exynos5250-dt.h | 11 +-
> include/configs/lacie_kw.h | 9 +-
> include/configs/omap4_common.h | 7 +-
> include/configs/omap5_common.h | 9 +-
> include/configs/omap5_uevm.h | 4 +-
> include/configs/origen.h | 2 +
> include/configs/smdkv310.h | 2 +
> include/configs/trats.h | 17 +-
> include/dwmmc.h | 3 +
> include/fdtdec.h | 1 +
> include/mmc.h | 26 ++
> lib/fdtdec.c | 1 +
> spl/Makefile | 8 + 82 files
> changed, 1899 insertions(+), 783 deletions(-) rename
> board/samsung/smdk5250/tzpc_init.c => arch/arm/cpu/armv7/exynos/tzpc.c
> (69%) rename arch/arm/lib/{bss.c => sections.c} (79%) create mode
> 100644 board/LaCie/common/cpld-gpio-bus.c create mode 100644
> board/LaCie/common/cpld-gpio-bus.h create mode 100644
> board/samsung/smdk5250/exynos5-dt.c create mode 100644
> doc/device-tree-bindings/exynos/dwmmc.txt create mode 100644
> drivers/mtd/spi/gigadevice.c
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130624/79b01222/attachment.pgp>
More information about the U-Boot
mailing list